I am trying to make executables out of the Cuda Samples . My specs are CUDA 11.5 with Visual Studio 2019. When I check on the samples.sln file to build the executable of all the CUDA samples, I get the following message:
"C:\ProgramData\NVIDIA Corporation\CUDA
Samples\v11.5\7_CUDALibraries\batchedLabelMarkersAndLabelCompressionNPP\batchedLabelMarkersAndLabelCompressionNPP_vs2019.vcxproj
: error : The imported project "C:\Program Files (x86)\Microsoft
Visual
Studio\2019\Community\MSBuild\Microsoft\VC\v160\BuildCustomizations\CUDA
11.5.props" was not found. Confirm that the expression in the Import declaration "C:\Program Files (x86)\Microsoft Visual
Studio\2019\Community\MSBuild\Microsoft\VC\v160\BuildCustomizations\CUDA
11.5.props" is correct, and that the file exists on disk. C:\ProgramData\NVIDIA Corporation\CUDA
Samples\v11.5\7_CUDALibraries\batchedLabelMarkersAndLabelCompressionNPP\batchedLabelMarkersAndLabelCompressionNPP_vs2019.vcxproj"
Some background:
I understand that it is important to check compatibility of your CUDA version with Virtual Studio. To that end, when I had initially installed VS 2022 Community edition and then I attempted to install CUDA 11.5, I got the message that CUDA couldn't locate VS on my system. Then I tried installing VS 2019 first and then I tried to re-install CUDA 11.5. This time, I did not get the previous warning message and thought that all was good. But alas that was not the case!:(
Any advice or insight would be greatly appreciated on how to tackle this issue! Thank you in advance
Solved:
The following configuration ran fine:
Microsoft Visual Studio 2013 Community Edition, Nsight
Visual Studio Edition 4.7, and CUDA 7.5.
Related
I have a problem when trying to install apache 2.4 on my windows 10. It always shows the error that VCRUNTIME140.dll is missing. I have checked other threads and found out that installing the 2015 Visual c++ Redistributables x64/x86 always solves the problem but I have both installed and I still have this problem. Are there any other solutions?
You need to install Microsoft Visual C++ 2015 Redistributable Update 3 RC, please find the link here, choose between the 32bit or the 64bit.
Reinstall the apache 2.4 and error should gone.
I had the same issue after installing wamp on windows 10.This worked for me.
Download VCRUNTIME140.DLL
Copy the dll file to C:\Windows\System32 using administrative privileges.
Try reinstalling apache.
Download and install the proper version of Microsoft Visual C++ 2015 Redistributable Update 3 RC regarding your hardware architecture (x86 / x64). Use the link below:
Microsoft Visual C++ 2015 Redistributable Update 3 RC
On Windows 6 X64, got an error 500 on any PHP files,
installing the 2015 Visual c++ Redistributables x64 solved my problem.
I'v already had VC 2015 Redist on my PC but files were not copied into Windows\System32.
So I copied missing files directly to this folder. A thing that I should mention is since I compiled my application in X86 mode I copied them from
C:\Program Files (x86)\Microsoft Visual Studio 14.0\VC\redist\x86
not
C:\Program Files (x86)\Microsoft Visual Studio 14.0\VC\redist\x64
I know that this solution is not the ideal one, but it was a workaround for my case.
If you are using Microsoft Visual C/C++ and you have already downloaded VCRUNTIME140.DLL, Go to Project Properties->Configuration Properties-> C/C++ -> Code Generation, Set Runtime Library Multi-threaded (/MT)
Remove apache 2.4 from your pc
Download VCRUNTIME140.dll from this link
Copy VCRUNTIME140.dll file and paste it inside to Windows/System32
Finally reinstall apache and run
I've installed the CUDA 10.2 tools on Windows 10 along with Visual Studio Community Edition. When I run the nvcc compiler on a .cu file from the command line it complains that it cannot find cl.exe, which apparently is a Microsoft compiler. If cl.exe is part of VSCE it didn't get put on the PATH. Maybe there are additional steps that I don't know about
Also, VSCE doesn't know what .cu files are and I can't find any extensions for NVidia or CUDA.
Does VSCE support CUDA development, or do I need the commercial edition or something else to get going with CUDA development on Windows?
Update:
I tried building one of the sample projects (CUDA Samples\v10.2\1_Utilities\deviceQuery) by importing it into VSCE and it fails with this message:
Error MSB4019 The imported project "C:\Program Files (x86)\Microsoft Visual Studio\2019\Community\MSBuild\Microsoft\VC\v160\BuildCustomizations\CUDA 10.2.props" was not found. Confirm that the expression in the Import declaration "C:\Program Files (x86)\Microsoft Visual Studio\2019\Community\MSBuild\Microsoft\VC\v160\\BuildCustomizations\CUDA 10.2.props" is correct, and that the file exists on disk.
The solution is here. The CUDA installation guide fails to mention that you have to copy several files from the CUDA installation to the VSCE installation.
I have a problem when trying to install apache 2.4 on my windows 10. It always shows the error that VCRUNTIME140.dll is missing. I have checked other threads and found out that installing the 2015 Visual c++ Redistributables x64/x86 always solves the problem but I have both installed and I still have this problem. Are there any other solutions?
You need to install Microsoft Visual C++ 2015 Redistributable Update 3 RC, please find the link here, choose between the 32bit or the 64bit.
Reinstall the apache 2.4 and error should gone.
I had the same issue after installing wamp on windows 10.This worked for me.
Download VCRUNTIME140.DLL
Copy the dll file to C:\Windows\System32 using administrative privileges.
Try reinstalling apache.
Download and install the proper version of Microsoft Visual C++ 2015 Redistributable Update 3 RC regarding your hardware architecture (x86 / x64). Use the link below:
Microsoft Visual C++ 2015 Redistributable Update 3 RC
On Windows 6 X64, got an error 500 on any PHP files,
installing the 2015 Visual c++ Redistributables x64 solved my problem.
I'v already had VC 2015 Redist on my PC but files were not copied into Windows\System32.
So I copied missing files directly to this folder. A thing that I should mention is since I compiled my application in X86 mode I copied them from
C:\Program Files (x86)\Microsoft Visual Studio 14.0\VC\redist\x86
not
C:\Program Files (x86)\Microsoft Visual Studio 14.0\VC\redist\x64
I know that this solution is not the ideal one, but it was a workaround for my case.
If you are using Microsoft Visual C/C++ and you have already downloaded VCRUNTIME140.DLL, Go to Project Properties->Configuration Properties-> C/C++ -> Code Generation, Set Runtime Library Multi-threaded (/MT)
Remove apache 2.4 from your pc
Download VCRUNTIME140.dll from this link
Copy VCRUNTIME140.dll file and paste it inside to Windows/System32
Finally reinstall apache and run
I installed visual C++ express from http://www.visualstudio.com/en-us/downloads#d-2010-express. I have also installed Microsoft SDKs http://www.microsoft.com/en-us/download/details.aspx?id=8279.
I need the vcvars64.bat for the installation of one of my programs (Gnu Linear Programming Kit or GLPK). Unfortunately, I don't see this file in C:/Program Files (x86)/Visual Studio 10.0/vc. I typed the following command in cmd terminal:
"CALL "C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin\SetEnv.cmd" /x64"
But it does not create the vcvars64.bat file in the intended place.
Can I just download this file from some webpage and put it in C:/Program Files (x86)/Visual Studio 10.0/vc ? Any feedback will be very appreciated.
Thanks,
Nazmul
The file is located in VC/bin/amd64 in the Program Files folder for Visual Studio 2010
Edit: Sorry, I checked with my own 2010 install, which is not an "Express" one. VS2010 Express comes without a 64 bits compiler.
See How to compile a 64-bit application using Visual C++ 2010 Express?
I have a program that was built in Visual Studio 2005. However, this program does not run on Windows 7 machine. I converted the project from Visual Studio 2005 to Visual Studio 2010. I then copied the published files to a Windows 7 laptop and ran the executable from there. When doing so, I got the following error:
Unable to install or run the application. The application requires that assembly Microsoft.ReportView.ProcessingObjectModel Version 8.0.0.0 be installed in the GAC first
Most of the solutions that I have found are for Visual Studio 8. Anybody have an answer?
I was able to resolve this by removing the Microsoft.ReportView.ProcessingObjectModel Version 8.0.0.0 from the assembly and adding 10.0.0.0 instead.