I have a problem getting a valid absolute address in my Makefile. I need to migrate from GNU Make 3.81 to 4.3.
When using this:
PROJECT_DIR = $(subst \,/,${CURDIR})/..
Instead of something like:
D:/Project/What_ever/
I'm getting this:
/d/Project/What_ever
I need the absolute address for some external tools.
And of course the /d/... is not the Windows format really.
Related
I create makefile with "xmkmf" command in imake using Ubuntu 14.04.3
when i run make command i get this error
Makefile:1056: *** missing separator. Stop.
line 1056 is:
MComplexProgramTarget(_cmidf_.o,$(LOCAL_LIBRARIES),)
The problem appears due to an unexpanded macro. For instance, in a Debian 6 system, I see the MComplexProgramTarget macro used only in the Motif.rules file, which in turn is included from cde.rules, and that is not included by any of the platform-specific imake files.
Since it is unlikely that OP has Motif installed on Ubuntu, it seems more likely that this was cut/paste from some example which was originally written for Motif, e.g., for Solaris back in the 1990s (when CDE was supported).
That line doesn't belong in a Makefile.
The file you're looking at is probably something like this: no Makefile, but an Imakefile. You need to feed it to xmkmf, not to make.
If it is really in the Makefile generated by xmkmf, as you claim, something is wrong in the IMakefile that xmkmf generated it from.
I am trying to write some makefiles on windows for arm gnu toolchain. (yagarto.de)
But for
MY_LIBC_PATH = $(realpath D:/temp//_latest//../)
I get
D:/privat/stm32/eclipse-juno_workspace/yagarto_test/D:/temp
My goal is to get only second part(D:/temp), the first part(D:/privat/stm32/eclipse-juno_workspace/yagarto_test/) is my working directory..
I supose realpath is a make function in this case...
Any idea how to get only D:/temp?
This is a known problem in GNU make. For example, see this post in the make-w32 list. That post also proposes a workaround.
I have searched through this forum but am not able to find an answer to this question, still if I have missed it please excuse me and direct me to the same.
I am trying to understand makefiles and came across the makefile for the tcpreplay utility on Linux. There are lot of macros that have been defined with the value starting an ending in a #. What are these values, how are they used? A snippet:
ACLOCAL = #ACLOCAL#
AMTAR = #AMTAR#
AR = #AR#
AUTOCONF = #AUTOCONF#
AUTOGEN = #AUTOGEN#
AUTOHEADER = #AUTOHEADER#
This is a makefile template, likely for software built with a GNU configure script. When configure is run, the #NAME# placeholders are replaced with proper values as determined at runtime. E.g. #AR# will be the name (or path) of the archiver, /usr/bin/ar. You then have a proper Makefile that you can run with a make invokation. If an actual Makefile still contains #NAME# placeholders, there was an error in running configure.
You are very likely not looking at a file named Makefile but one named Makefile.in. The .in suffix indicating that this is input to configure.
You can find all the gory details in the GNU autoconf manual.
I am (was) using the __FILE__ and __LINE__ macros for printing diagnostic messages out of my code. This works quite well when you use GCC with make, the file is as short as you specified it on the command line. I recently switched to using CodeLite which uses fully qualified file names (at least under windows) when building. Suddenly my diagnostic output is almost not readable.
It there a way to get only the file component of the filename in the preprocessor? I can live with a non portable GCC specific solution. (I will fallback to plain __FILE__ other cases.)
Sure I can pass the contents of __FILE__ through a function and extract only the file component, but string operations was not what I had in mind for diagnostic messages that should not change runtime behavior...
NOTE: I use the filename the way GNU uses it. A Path is collection of filenames and a filename is either a relative or absolute identifier of a file. A filename can be made up of a directory component and file component.
If you are using GNU Make then you can simply pass -D BASE_FILE_NAME=\"$*.c\" in on the preprocessing stage of compilation (if you're doing them separately, or at compilation if in a single stage, which is the norm).
This depends upon the way you have your file names determined. Mine come from a list of plain file names and are prefixed with directories using functions in the makefile at a later stage.
IE, this works well for me, but your mileage may vary! :-)
A simplified version of my make "code" :
CLASSES = main.c init.c
PREPROCESSED = $(patsubst %.c,$(PPCDIR)/%.pp.c,$(CLASSES))
$(PREPROCESSED): $(PPCDIR)/%.pp.c: %.c $(ALLH)
$(GCC) $(GCCOPTS) -D BASE_FILE_NAME=\"$*\" -E $< > $#
The simply use BASE_FILE_NAME in your code as you like :-)
There is no known preprocessor macro that provides the functionality. Passing __FILE__ through a function seams like the only sensible option.
In reply to FredCooke above, you can exchange this line:
-D BASE_FILE_NAME=\"$*.c\"
With:
-D BASE_FILE_NAME=\"$(<F)\"
This will give you proper file name expansion, for .cpp as well.
As has already been mentioned in other answers, the only portable way to do this is by passing in a define from the compiler, there are however compiler spesific extensions:
Clang: __FILE_NAME__
GCC: __BASE_FILE__
I'm trying to 'make' using a pretty simple makefile. My makefile is named 'Makefile' so I'm simply using the command 'make'.
I get this strange error:
make: *** No rule to make target `/Makefile', needed by `Makefile'. Stop.
If, however, I use
make -f "full-path-to-makefile" it actually does run (with odd consequences...). I should say that I'm running all this from the directory where the Makefile lies, of course.
I'm working on Mac OSX, using tcsh.
Edit:
I'm working in the LLVM framework, trying to compile a pass function and this is the associated makefile:
LEVEL = ../../../
LIBRARYNAME = FunctionName
LOADABLE_MODULE = 1
include $(LEVEL)/Makefile.common
Any ideas will be appreciated :)
I had the same problem trying to write a new pass for LLVM i followed these instructions trying to make a HelloB (as Hello already exsited) http://llvm.org/docs/WritingAnLLVMPass.html#quickstart
What i has to do was do a ./configure again then make from the base directory.
I'll go out on a limb: you have an extra slash. Try omitting the final slash in $(LEVEL).
I found the answer, sort of:
The problem was with the installation process of LLVM. It seems that if you do the installation in one order instead of another it can lead to this error. It doesn't make any sense to me, but after I installed it properly everything compiles great (same code, same Makefile, same make program).
I don't really know why this happened, but I know how to fix it :)
What you want to do is ./configure again then make from the base directory (contrary to what is stated in the instructions on the web-site). That worked for me.
BTW - I got the same results running on Ubuntu (with the same fix).
Just to add some information here (since this is the first hit that comes up on Google when looking for the error) - I had the same problem which suddenly popped up on a (previously working) LLVM setup on OSX, and traced it back to the behavior of the realpath command in make.
Specifically, what was happening was that I had a directory called "LLVM/llvm-2.9-build", but for some reason the attempt to resolve PROJECT_OBJ_ROOT at the top of Makefile.config would decide that this directory was in fact called "llvm/llvm-2.9-build". Since OSX is case-insensitive by default, this doesn't cause an immediate problem, except that subsequently LLVM_SRC_ROOT would be set to "LLVM/llvm-2.9-build". This then meant that the creation of PROJ_SRC_DIR using patsubst to replace the object directory would result in a non-existent path (as the unmatched case means that no pattern replace occurs), which in turn would get resolved to / by realpath.
With PROJ_SRC_DIR set to /, this results in the makefile copy rule in Makefile.rules deciding that the source makefile is at $(PROJ_SRC_DIR)/Makefile (ie /Makefile), and the error message described.
It seems that it is only the built-in implementation of realpath in Make (GNU Make 3.81 in my case) that has this behaviour, as forcibly using the macro version of realpath from the top of Makefile.config fixes the problem. However, this isn't a good long-term fix, as you'd have to manually patch every one of the LLVM makefiles.
In the end, I couldn't see where realpath would be getting the lower-case "llvm" from, but figured it was probably an artifact somehow of some caching of the name from a point in time when I'd referenced the directory using its lower-case name. Hence I tried going to that directory and mv-ing it to a completely different name, and then back to "LLVM" before going in and building again, and that seems to have solved the problem.
I hope that's of some use to anyone else who comes across this particular weirdness!
It's not a complete answer, but what you are seeing is gmake not finding the Makefile it is told to include, and thus it is trying to remake it and failing because it can't find a recipe for it either.
However, the Makefile snippet you posted does not produce the error message you are seeing, so I think the problem is inside the Makefile.common file. Look for include statements which reference a $(some variable expansion)/Makefile and work backwards from there. You can also try to run gmake with the -d option and follow the processing based on the output.
Since your include line reads:
include $(LEVEL)/Makefile.common
it is puzzling that you are not getting an error about /Makefile.common. If you were, then I'd suggest that maybe you have a trailing blank after the definition of LEVEL.
Could there be a line in Makefile.common that itself includes $(SOMEMACRO)/Makefile and you have not set the value of SOMEMACRO?
here's my fixes for this issue: (https://github.com/rust-lang/rust/issues/24887#issuecomment-99391849)
update src/llvm/Makefile.config.in before running ./configure
or update x86_64-apple-darwin/llvm/Makefile.config before make
line 59:
PROJ_SRC_DIR := $(LLVM_SRC_ROOT)$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR))
update to
PROJ_SRC_DIR := $(patsubst $(PROJ_OBJ_ROOT)%,$(LLVM_SRC_ROOT)%,$(PROJ_OBJ_DIR))
line 86:
PROJ_SRC_DIR := $(call realpath, $(PROJ_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)))
update to
PROJ_SRC_DIR := $(call realpath, $(patsubst $(PROJ_OBJ_ROOT)%,$(PROJ_SRC_ROOT)%,$(PROJ_OBJ_DIR)))