While building and running my app I simulator I came across this error
Domain: IXUserPresentableErrorDomain
Code: 1
Failure Reason: Please try again later.
Recovery Suggestion: Failed to set unique install ID on plugin com.myapp.enterprise.MyExtensionEnterprise
User Info: {
DVTErrorCreationDateKey = "2022-03-05 06:33:17 +0000";
IDERunOperationFailingWorker = IDELaunchiPhoneSimulatorLauncher;
}
I am running on Xcode 13.2.1 and on Monterey, Have anyone else seen this before or know how to get around it?
I had a similar issue and found out that the IntentHandler.swift of an Intent Extension wasn't added to the Target Membership. Adding it to the Intent Target Membership fixed the problem.
For me, what worked was to fully remove the applications from both Apple Watch and iPhone simulators, clean the build, and it should start working.
Between recreating the widget extension, deleting derived data, erasing the content on the sim, restarting xcode (so basically standard stuff multiple times), something just clicked for xcode (???) and it started working for me.
My best bet is that what happened was:
Turned on "main app target > Build Phases > Embed App Extensions > Copy only when installing"
Ran the app (this time it was successful, however, the widget was not present)
Turned "main app target > Build Phases > Embed App Extensions > Copy only when installing" back off
However, this is just a wild stab, but it might work for someone else as well.
Good luck!
*forgot to say, mine is an ios widget extension
I am developing a MacOS Document based app using SwitfUI on MacOS 12.0.1 using Xcode 13.1 on a MacbookPro M1 Pro. I am encountering an issue that the app is always re-opening the document browser at the last used directory. Which is OK when it is on the Machine but a pain if the last used was on a network drive. I am trying to find a way of suppressing this "always restore using the last directory" mode of operation.
I have tried using the #NSApplicationDelegateAdaptor approach and implementing;
func applicationSupportsSecureRestorableState(_ app: NSApplication) -> Bool {
print(#function + " returning false")
return false
}
within my NSApplicationDelegate class, which does get called (although it seems sometimes after the dialog is presented), however this does not stop the app secretly remembering the last directory.
Does any know where this information might be being hidden or if it can be suppressed ?
I have looked for, but cannot find, a way of injecting a starting directory into a DocumentGroup as a possible solution.
TIA Alan.
Ok, for anyone who ends up here looking for a similar issue.
After a chunk of digging I found the answer, for me, was to add
UserDefaults.standard.removeObject(forKey: "NSNavLastRootDirectory")
into the app startup. It was also suggested to do
UserDefaults.standard.removeObject(forKey: "NSNavLastCurrentDirectory")
However, just doing the first appears to suppress the file open dialog, doing both causes the file open dialog to open with the user Documents directory.
When I try to preview one of my views in the canvas I keep getting the following error:
PreviewUpdateTimedOutError: Updating took more than 5 seconds
All my other views load perfectly fine.
Why is this happening and how do I resolve?
I am using SwiftUI in Xcode 11.4 (public release)
I stopped using the simulator and chose "Any iOS Device" and that solved the problem.
In my case the issue was this line in Build settings:
Something I did accidentally changed signing settings in my project. Specifically, "signing identity" was set to "Sign to Run Locally.".
For some reasons, SwiftUI Previews don't work then.
Simply deleting this line from build settings (aka setting default value) solved the problem.
Some time, the error displaying is not the real error.
For me it was because i missing : .environmentObject(...)
As of Xcode 12.5.1, the message PreviewUpdateTimedOutError: Updating took more than 5 seconds most likely means that your app crashed and thus updating the preview failed. The real reason for the crash is unfortunately obscured by this useless message (why Apple would do that is beyond me). To get at the real reason, you'll need to:
click Diagnostics at the top of the preview next to the useless error message
in the next dialog, click Generate Report > Reveal in Finder
This will take a bit. Then Finder will open with a folder highlighted. Open that folder. Inside you'll see a lot of log files and folders.
If your app indeed crashed, you'll see a folder called CrashLogs which contains crash logs for your app, including the error message and stack trace. This should help you resolve the actual error causing the preview to break.
Note that for me, sometimes the CrashLogs were not included in the report even though my app really did crash. Retrying the preview and generating another report fixed this for me. The whole error reporting process seems to be rather unstable for the previews, unfortunately.
Try Clean (Shift + ⌘ + K) and Build (⌘ + B) to build again the SwiftUI project, it works in Xcode 11.6. Try building a basic hello world app.
In my case the issue was that the PreviewProvider was marked private. Simply make it internal or remove the private access modifier.
private /* <- remove */ struct YourView_Previews: PreviewProvider {
static var previews: some View {
// Your previews
}
}
I am using Version 13.2.1 (13C100). I have Clean (Shift + ⌘ + K) and Build (⌘ + B) the project. But, the problem remains.
Then, just restarted Xcode. And the problem gone.
In my case viewModel required to display SwiftUI_preview was doing a call to a CoreData (fast call) in the init of the viewModel.
Moved actual call of that "reload() method" so it's not called on preview, fixed.
(I believe the correct way is to use mocked protocol instead of instance of the viewModel)
If you have an .onAppear clause, try commenting that out for preview.
None of these suggestions helped me but I did discover that you can't rely entirely on a successful build to pick up all issues. In my case I had '.modifier(modifier:)' entered incorrectly as 'modifier(modifier:)'. My code built successfully but my preview did not work until I added the period before modifier.
For me the issue was related to a force unwrapping of an element not being found at preview time.
Note: Always check the diagnostics report. The issue will be at the top section after termination reason.
In my case the canvas/screen size was smaller than the content, so simply wrapping my content in the scrollView do remove the error and displaying the content in the canvas.
I had a fatalError("...") in my code, which I only figured out after reading the diagnostic logs. Would be nice if SwiftUI actually hinted this!
You can get the diagnostics by clicking "Diagnostics" next to "Try Again" at the top of the preview window.
To summarise lots of answers here, it seems that the preview taking a while to update is the equivalent of a crash, when running on a real device or on the simulator.
First comment out all the environment Objects are used for the particular View. Once you get preview then uncomment it to run the build. This trick works for me
//#EnvironmentObject var observerObj:PropertyObserver
I had this issue as well, and nothing fixed the problem. I am now on 11.6 and after updating the issue went away. I think it might be a problem with Xcode 11.4.
I'd suggest updating Xcode if possible.
In SwiftUI, you couldn't add more than 10 subviews into your contentview, otherwise it couldn't compile.
I had the same problem, then I started to comment out the subViews inside my main view, one by one & try to preview again then I found out the problem was caused because I forgot to put a dot before one of the subViews attributes.
So that's how I fixed it.
The reason is because its unable to find the landmarkData.json file. To resolve this,
select landmark.json file in Resources.
Show Inspectors ( top right icon )
Select show file inspector
Under Target membership, select / check Landmarks
This should resolve the preview issue.
For some reason, in SwiftUI, when I embeded Text in Scroll View and VStack, this error occurred. After few unsuccessful attempts to fix this by clearing and building project, I deleted code and wrote it down again, same as it was. Now it is working.
I had my run device set to a real device I use for testing. When I changed that to one in the simulator it started working again.
Similar to #YannSteph, this happened to me because I put the .environmentObject() at the app entry point where it creates the first view:
#main
struct RecipeApp: App {
var body: some Scene {
WindowGroup {
RecipeTabView()
.environmentObject(RecipeModel())
}
}
}
But this prevented the preview from working. I thought I was being smart putting it there, so all the views could have access to it, but it just crashed the preview.
Moving it back into the main View.Swift file that is my app's starting view fixed the preview issue.
^^^
EDIT: Ran into this again when I didn't put the .environmentObject() in the struct for the preview. Probably a rookie mistake but there appears to be many ways to trigger this error.
I had the same issue after creating a brand new Multiplatform App project using Xcode 12.5. Based on the solutions above I followed a hunch and now believe that the issue is due to invalid path parameters.
After renaming the Schemes and Targets from (iOS) to .iOS (and the same for macOS), to remove spaces and brackets, it is now working.
I had this issue after changing bundle id and signing from personal to team.
After changing device to Any device as advised here, I received another error description, saying
Could not install the preview host "AppName.app" on iPhone 12 Pro Max
agentBundle = com.bundle.Its.AppName {
url: file:///Users/macbookair/Library/Developer/Xcode/DerivedData/AppName-> desupjbpqvjlegfbskxydixpouvc/Build/Intermediates.noindex/Previews/AppName/Prod> ucts/Debug-iphonesimulator/AppName.app
> version: 49557
signingInformation: Code Signing {
identifier: com.bundle.AppName
hasGetTaskAllow: false
isSandboxed: false
}
}
Clean build, deleting Derived, Deleting all apps installed on simulators, cleaning Xcode Cache, restarting Xcode and Mac didn't help.
What had helped was creating new project with initially correct bundle id and copying all my files there.
I have got into the same issue on Xcode 12.4, but the code works fine on Xcode 13.0.
I was following the IOS App Dev Tutorial, where one creates an app named ScrumDinger. I ran into this issue at Displaying Data in List
In my case the problem was that I wrote in CardView.swift
HStack {
Label("\(scrum.attendees.count)", systemImage: "person.3")
accessibilityLabel("\(scrum.attendees.count) attendees")
instead of
HStack {
Label("\(scrum.attendees.count)", systemImage: "person.3")
.accessibilityLabel("\(scrum.attendees.count) attendees")
The missing dot before accessibilityLabel was the problem.
Tutorial:
https://developer.apple.com/tutorials/app-dev-training/displaying-data-in-a-list
In my case the issue was that I was trying to preview a view with a fixed width (.previewLayout(.fixed(width: 344, height: 220))) wider than the selected simulator (iPhone SE 1st generation) 😬
I get this error often. My last time of occurrence, I had "gesture" instead of ".gesture". Usually its best to just need to find the error in your code yourself because Xcode does not point out the issue directly.
I only had Xcode 14 Beta installed on my machine and the previews did not work. All of the other answers did not work for me.
Installing Xcode 13.4.1 and running the preview with it did solve my problems and now I can also see the preview in Xcode 14 Beta as well.
In my case, I disabled automatic canvas refresh by going to Editor -> Canvas -> Automatically Refresh Canvas and making sure it.
Then I use ⌥⌘P (Command-Option-P) to refresh the canvas preview.
I have an application with the following structure:
./Data/test.txt
./TestMacOSApp
So my TestMacOSApp opens ./Data/test.txt and uses the content of test.txt. This app was working for a long time either on my MacBook or others MacBook. Recently I noticed that the app works on my MacBook fine,
but on others it crashes throwing "File is not found exception".
I create TestMacOSApp using XCode v9.1.
MacOS version is 10.12.6.
The App creation steps are Archive->Export->ExportApp (Without re-signing).
Does someone else have such an issue?
How can I solve this issue?
I don't know how you open the file because you didn't provide the code which does this.
But I know that, when you export your app on other computers, it is important to calculate the real path with fullPathForFilename, instead of giving directly the path that you know. Like this:
auto fileUtils = FileUtils::getInstance();
string content = fileUtils->getStringFromFile(fileUtils->fullPathForFilename(filename));
Have you done this? If you have, and it doesn't work, your file is probably just not where you expect it to be, so please check again.
To preface, I haven't changed any code or entitlements in my app. It always built and worked great but now all of a sudden I am getting this error.
12/8/15 10:05:45.388 AM appleeventsd[51]: A
sandboxed application with pid 2414, "XXX" checked in with
appleeventsd, but its code signature could not be read and validated
by appleeventsd, and so it cannot receive AppleEvents targeted by
name, bundle id, or signature. Install the application in
/Applications/ or some other world readable location to resolve this
issue. Error=ERROR: #100013 {
"NSDescription"="SecCodeCopySigningInformation() returned 100013, -."
} (handleMessage()/appleEventsD.cp #2098) com.apple.root.default-qos
I have tried the following
Install the app in "Applications" as the error suggest.
Restart the computer.
Delete the container and empty the trash.
Killing off cfprefsd. Both root and user.
Re-installing Xcode.
Removing the "Developer" folder in my Library.
Running the app in a virtual machine with a brand new install of my app.
Recreate all my developer certificates, provisioning profiles, etc...
None of the above works.
I have also tried all suggestions in the following links
Mac sandbox created but no NSUserDefaults plist
Error while implementing Sandbox: "deny file-read-metadata /Library"
Can't code sign helper app properly
Error in Sandboxed App, When loading Helper (LoginItems), code signing issue
And nothing has resolved the issue. My app, all of a sudden stopped working.
I think I figured it out. I re-wrote the code for creating a security scoped bookmark... all is working again. I couldn't find any differences but I think it was something in my code.