I currently purchased Synology's ds220+ model and am using it as a NAS Server.
The line is connected to the LAN port of the router to which the WAN line is plugged, and the end is connected to the NAS.
In this situation, I wanted to set up a NAS server to be used externally, not on a local network.
So I even set up WebDAV Server, DDNS, and port forwarding on the router.
To test this, I created a NAS server directory through RaiDrive in a Windows environment.
From the created directory, I tried to upload files to a folder with read/write permission and confirmed that it was working normally.
However, the problem occurred in MacOS.
In Finder, a server folder was created through the "Connect to Server" option, and a file upload was attempted, but an error such as the attached picture occurred in all types of files.
Could you tell me if there is a problem with the way MAC creates the server folder?
Idea: Your OS doesn't support SMB:
Download an FTP or SMB client. (FTP: E.g.: Filezilla)
Idea: A friewall is blocking it:
Check your anti-virus-program
Other Problem:
Use an USB Stick & NAS USB Copy
or upload it via DSM File Manager
Open NAS IP-adress via Safari/Firefox/Chrome
Log In
Open File Station / File Manager
Search folder
Click [Upload]
Choose the file from your PC
Finised
Related
I have a VPN restricted share network on a server (Win 10), and after I connect to VPN and try to connect to that shared network on my Ubuntu 20.04 client (Ubuntu Desktop) via GUI. By GUI, I mean specifically applying these steps:
Open "Files" browser.
Select "+ Other Locations" on the left side-bar menu.
Type your server to connect on "Connect to server", mine was something like smb://myServer/shared/ and click "Connect".
When a login prompt appears, write down your credentials (or login anonymously).
You should have access to that shared network now.
When I did those steps above before upgrading to Ubuntu 20.04, when I was using Ubuntu 18.04, I was able to successfully access to the shared network.
After upgrading to Ubuntu 20.04, however, on the step 4 (after I enter my credentials and try to connect) the connection just hangs, and the shared network is not mounted.
After researching the problem a bit, the potential solutions I found did not work, most of which
suggests to add the following to smb.conf to be able to access to SMB1 type of network.
client min protocol = NT1
server min protocol = NT1
Reference
Can't acces NAS anymore after upgrading to 20.04.
Currently, what I tried aside is to mount the shared folder manually with the following command
sudo mkdir /mnt/my_share
sudo mount -t cifs -o username=name,password=pw //server/shared /mnt/my_share/
which strangely worked.
I do not have a clue why "Files" did not work and manually doing it worked. I cannot say the former failed completely because after entering credentials on login prompt there was no error, but just hangs.
I setup Apache Guacamole 0.9.14 on my CentOS 7 with nginx as reverse proxy to it.
I want to give limited access to some of my employees for some of my servers via ssh.
Some of them are SFTP enabled and to prevent sabotage on purpose or not I edit guacamole upload function to upload a copy of file uploaded on guacamole server itself alongside destination server.
I was wondering if I could create a copy of files getting on destination servers via wget, curl, etc.
If I can control specific commands on destination servers and do some actions before executing them, (For example backing files on guacamole server before executing any rm -rf command or creating a copy of file 'wget'ed on guacamole server), that would be great.
There are more than a thousand servers with different Linux OSs on them, so editing any server except guacamole server itself is impossible to do.
Any idea on how to control commands before executing on guacamole server specially on ssh?
What is the equivalent to "Connect To Server" on the mac for the command line?
I would like to automate the process rather than summon the dialog every time I need to connect to a server.
There are multiple ways to connect to remote server!
I am assuming you have server running on windows OS. Mac OS X includes the SMB protocol for networking with Windows computers; some Linux and Unix systems can also share files with this protocol as well. You can easily mount a shared SMB volume using the mount command. Steps to be followed as below
1) mkdir /temp
2) chmod 777
3) mount -t smbfs //username#ip/nameOfSharefolder /temp
After this you can browse to/temp directory and browse
You can also use sshssh or ftp command to access the remote server but you need to run the ftp server in case of ftp command or remote access must be enable in case of ssh
I am trying to debug PHP files which sit on a remote server (on the same network) without success.
Here is my php.ini config for xdebug on the remote server where PHP and xdebug are installed:
xdebug.remote_enable=1
xdebug.remote_host=192.168.128.56
xdebug.remote_port=9000
xdebug.remote_handler=dbgp
xdebug.remote_autostart=0
192.168.128.56 is the IP address of my PC on which my editor is installed.
I have tried to get this working with both Atom and Sublime Text 3 without success. I think that my path bindings may be incorrect.
I log into the remote linux machine using SFTP. I can then double click on php files in my application and they will open in my editor where I can work on them and save them. How can I set up the path bindings to debug these remote php files? I'm not sure what the second (local) part of the path binding should actually be? Do I need to add the location where the FTP software stores a temporary copy of the file I am working on as the local part of the binding?
I have tried the following:
URL - the address of where the app runs on the remote server:
e.g. http://www.mywebsite.com/testapp/
Path Binding - remote path to the application root on linux : path to the local copy of the files on my machine where the FTP software stores them:
e.g. /web/testApp/ : C:\Users\me\AppData\Local\Temp\scp18929\
I'm a little confused about how the path binding works, and what the values should be. Am I doing this correctly? Can this even be done?
If anyone can help that would be great.
Probably, the first thing to check is whether Xdebug actually tries to connect to your IDE. You can do that, by adding:
xdebug.remote_log=/tmp/xdebug.log
to your php.ini file. When you then initiate debugging, there should be information in the /tmp/xdebug.log file, where it will tell you where it tried to connect too, and whether the connection succeeded or failed.
If you get something like:
I: Remote address found, connecting to 192.168.128.56:9000.
E: Could not connect to client. :-(
That means that either your IDE wasn't listening for something, or that there is a firewall preventing an incoming connection, or that the IP address is incorrect.
I am learning web development and I'm a bit stuck with FTP. I know it's used for file transfer but how do I actually use it? I found some PHP functions to connect to the FTP server and log in but what do I log in with? How do I create a username? Is FTP something like MySQL with it's own command line? Or is it something like Apache?
I am using Ubuntu 12.04 and I have LAMP installed. I found somewhere that I need to install a program to use FTP but I found somewhere else that I need to install FTP while installing PHP. This is really confusing.
Thanks.
FTP is File Transfer Protocol. It is not a programming language. FTP is used to connect to a computer to access its file system - to upload or download files. Imagine opening a folder on firends pc from you computer. In most linux you can type in a ftp address to the location bar in whatever file browser your using and access the ftp server as if it was a local folder. You can also use specific software for that - gftp, filezilla.
A ftp daemon does not come with lamp. Please refer to https://help.ubuntu.com/12.04/serverguide/ftp-server.html for details on how to install/configure a ftp daemon on ubuntu.
What you will use ftp for is to put your .php files on a remote machine. If you are doing things on your computer only it is likely that you do not need ftp.