Related
Let V be the set of vertices in a graph. I understand that given a graph of |V| vertices with no negative cycles, a shortest path will always have |V|-1 edges. I still don't quite understand why checking every edge |V|-1 times guarantees that Bellman Ford's algorithm will produce the shortest path. Can someone help me understand this better?
In the first phase (checking every edge once), you consider all potential shortest paths with only one edge. So if the shortest path has only one edge, you will have found it after the first phase. (But you don't yet know that you've found the shortest path.)
After the second phase of checking all edges, you will have considered all potential paths of two edges, since you consider all possible extensions by one edge of the paths you already considered. So if the shortest path has at most two edges, you will have found it after the second phase.
And so on… If the shortest path has at most |V|−1 edges (which it does), you will have found it after |V|−1 phases.
This is done in the relaxation step. In this step, vertice distances are updated incrementally. Intuitively, these updates are propagated throughout the graph: When you find a shorter path to one node, then its neighbours might also benefit from this shortcut. In the next iteration, they get updated too, and so on.
But this updating cannot continue indefinitely. The maximum number of times it can occur is precisely |V| - 1. You can visualise it as a path of updates propagating from one vertex, throughout all other vertices, back to the source. The source itself of course does not find a shortcut to itself.
In my opinion, it's necessary to do some math to understand it fully (although the other answers already give some intuition). Let's prove the following statement by induction:
Let s be the source vertex and u be any other vertex in the directed graph. After i iterations of Bellman-ford algorithm:
if d[u] is not infinity, it is equal to the length of some path from s to u.
if there is a path from s to u with at most i edges, then d[u] is at most the length of the shortest path from s to u with at most i edges.
Proof
The base case is i=0 (before any iteration). At this moment, d[s] = 0 and d[u] = ∞ for all u. It's obvious that (1) and (2) are valid for this case.
Let's consider that it's valid for i (inductive hypothesis).
At the i+1 iteration, consider a moment when a vertex v distance is updated by d[v] := d[u] + w[u][v]. By the inductive hypothesis, d[u] is the length of some path from s to u. Then d[u] + w[u][v] is the length of the path from source to v that follows the path from source to u and then goes to v. So, (1) is valid for the (i+1)-th iteration and by induction is valid for all natural i.
Now, consider a shortest path P (there may be more than one) from s to v with at most i+1 edges. Let u be the last vertex before v on this path. Then, the part of the path from s to u is a shortest path from s to u with at most i edges. Indeed, suppose that it's not. Then there would exist some strictly shorter path from s to u with at most i edges, which could be appended to the edge uv to obtain a path with at most i edges that is strictly shorter than P, which is contradiction. By inductive hypothesis, d[u] after i iterations is at most the length of the shortest path from s to u. Therefore, d[u] + w[u][v] is at most the length of P. In the (i+1)-th iteration, d[v] gets compared with d[u] + w[u][v], and is set equal to it if d[u] + w[u][v] is smaller. Therefore, after i+1 iterations, d[v] is at most the length of P, which is a shortest path from s to v that uses at most i+1 edges. So, (2) is valid for the (i+1)-th iteration and by induction is valid for all natural i.
To finish, notice that if the directed graph has |V| vertices and no negative cycles, a shortest path from a source s to a vertex u has at most |V| - 1 edges. So, by the previous result, Bellman-Ford indeed find all shortest paths from s.
Notice that The Bellman-Ford Algorithm is based on a recursive relationship, which states that:
d(i,v) is the shortest distance from the source to each node v with at most i edges between them.
As i grows to i+1, you allow one more edge, and you update the path length only if it improves.
Since we know that the shortest path can have at most n-1 edges, there is no point to grow i further, i.e, the shortest path has to be:
d(n-1,v).
What is the exact difference between Dijkstra's and Prim's algorithms? I know Prim's will give a MST but the tree generated by Dijkstra will also be a MST. Then what is the exact difference?
Prim's algorithm constructs a minimum spanning tree for the graph, which is a tree that connects all nodes in the graph and has the least total cost among all trees that connect all the nodes. However, the length of a path between any two nodes in the MST might not be the shortest path between those two nodes in the original graph. MSTs are useful, for example, if you wanted to physically wire up the nodes in the graph to provide electricity to them at the least total cost. It doesn't matter that the path length between two nodes might not be optimal, since all you care about is the fact that they're connected.
Dijkstra's algorithm constructs a shortest path tree starting from some source node. A shortest path tree is a tree that connects all nodes in the graph back to the source node and has the property that the length of any path from the source node to any other node in the graph is minimized. This is useful, for example, if you wanted to build a road network that made it as efficient as possible for everyone to get to some major important landmark. However, the shortest path tree is not guaranteed to be a minimum spanning tree, and the sum of the costs on the edges of a shortest-path tree can be much larger than the cost of an MST.
Another important difference concerns what types of graphs the algorithms work on. Prim's algorithm works on undirected graphs only, since the concept of an MST assumes that graphs are inherently undirected. (There is something called a "minimum spanning arborescence" for directed graphs, but algorithms to find them are much more complicated). Dijkstra's algorithm will work fine on directed graphs, since shortest path trees can indeed be directed. Additionally, Dijkstra's algorithm does not necessarily yield the correct solution in graphs containing negative edge weights, while Prim's algorithm can handle this.
Dijkstra's algorithm doesn't create a MST, it finds the shortest path.
Consider this graph
5 5
s *-----*-----* t
\ /
-------
9
The shortest path is 9, while the MST is a different 'path' at 10.
Prim and Dijkstra algorithms are almost the same, except for the "relax function".
Prim:
MST-PRIM (G, w, r) {
for each key ∈ G.V
u.key = ∞
u.parent = NIL
r.key = 0
Q = G.V
while (Q ≠ ø)
u = Extract-Min(Q)
for each v ∈ G.Adj[u]
if (v ∈ Q)
alt = w(u,v) <== relax function, Pay attention here
if alt < v.key
v.parent = u
v.key = alt
}
Dijkstra:
Dijkstra (G, w, r) {
for each key ∈ G.V
u.key = ∞
u.parent = NIL
r.key = 0
Q = G.V
while (Q ≠ ø)
u = Extract-Min(Q)
for each v ∈ G.Adj[u]
if (v ∈ Q)
alt = w(u,v) + u.key <== relax function, Pay attention here
if alt < v.key
v.parent = u
v.key = alt
}
The only difference is pointed out by the arrow, which is the relax function.
The Prim, which searches for the minimum spanning tree, only cares about the minimum of the total edges cover all the vertices. The relax function is alt = w(u,v)
The Dijkstra, which searches for the minimum path length, so it cares about the edge accumulation. The relax function is alt = w(u,v) + u.key
Dijsktra's algorithm finds the minimum distance from node i to all nodes (you specify i). So in return you get the minimum distance tree from node i.
Prims algorithm gets you the minimum spaning tree for a given graph. A tree that connects all nodes while the sum of all costs is the minimum possible.
So with Dijkstra you can go from the selected node to any other with the minimum cost, you don't get this with Prim's
The only difference I see is that Prim's algorithm stores a minimum cost edge whereas Dijkstra's algorithm stores the total cost from a source vertex to the current vertex.
Dijkstra gives you a way from the source node to the destination node such that the cost is minimum. However Prim's algorithm gives you a minimum spanning tree such that all nodes are connected and the total cost is minimum.
In simple words:
So, if you want to deploy a train to connecte several cities, you would use Prim's algo. But if you want to go from one city to other saving as much time as possible, you'd use Dijkstra's algo.
Both can be implemented using exactly same generic algorithm as follows:
Inputs:
G: Graph
s: Starting vertex (any for Prim, source for Dijkstra)
f: a function that takes vertices u and v, returns a number
Generic(G, s, f)
Q = Enqueue all V with key = infinity, parent = null
s.key = 0
While Q is not empty
u = dequeue Q
For each v in adj(u)
if v is in Q and v.key > f(u,v)
v.key = f(u,v)
v.parent = u
For Prim, pass f = w(u, v) and for Dijkstra pass f = u.key + w(u, v).
Another interesting thing is that above Generic can also implement Breadth First Search (BFS) although it would be overkill because expensive priority queue is not really required. To turn above Generic algorithm in to BFS, pass f = u.key + 1 which is same as enforcing all weights to 1 (i.e. BFS gives minimum number of edges required to traverse from point A to B).
Intuition
Here's one good way to think about above generic algorithm: We start with two buckets A and B. Initially, put all your vertices in B so the bucket A is empty. Then we move one vertex from B to A. Now look at all the edges from vertices in A that crosses over to the vertices in B. We chose the one edge using some criteria from these cross-over edges and move corresponding vertex from B to A. Repeat this process until B is empty.
A brute force way to implement this idea would be to maintain a priority queue of the edges for the vertices in A that crosses over to B. Obviously that would be troublesome if graph was not sparse. So question would be can we instead maintain priority queue of vertices? This in fact we can as our decision finally is which vertex to pick from B.
Historical Context
It's interesting that the generic version of the technique behind both algorithms is conceptually as old as 1930 even when electronic computers weren't around.
The story starts with Otakar Borůvka who needed an algorithm for a family friend trying to figure out how to connect cities in the country of Moravia (now part of the Czech Republic) with minimal cost electric lines. He published his algorithm in 1926 in a mathematics related journal, as Computer Science didn't existed then. This came to the attention to Vojtěch Jarník who thought of an improvement on Borůvka's algorithm and published it in 1930. He in fact discovered the same algorithm that we now know as Prim's algorithm who re-discovered it in 1957.
Independent of all these, in 1956 Dijkstra needed to write a program to demonstrate the capabilities of a new computer his institute had developed. He thought it would be cool to have computer find connections to travel between two cities of the Netherlands. He designed the algorithm in 20 minutes. He created a graph of 64 cities with some simplifications (because his computer was 6-bit) and wrote code for this 1956 computer. However he didn't published his algorithm because primarily there were no computer science journals and he thought this may not be very important. The next year he learned about the problem of connecting terminals of new computers such that the length of wires was minimized. He thought about this problem and re-discovered Jarník/Prim's algorithm which again uses the same technique as the shortest path algorithm he had discovered a year before. He mentioned that both of his algorithms were designed without using pen or paper. In 1959 he published both algorithms in a paper that is just 2 and a half page long.
Dijkstra finds the shortest path between it's beginning node
and every other node. So in return you get the minimum distance tree from beginning node i.e. you can reach every other node as efficiently as possible.
Prims algorithm gets you the MST for a given graph i.e. a tree that connects all nodes while the sum of all costs is the minimum possible.
To make a story short with a realistic example:
Dijkstra wants to know the shortest path to each destination point by saving traveling time and fuel.
Prim wants to know how to efficiently deploy a train rail system i.e. saving material costs.
Directly from Dijkstra's Algorithm's wikipedia article:
The process that underlies Dijkstra's algorithm is similar to the greedy process used in Prim's algorithm. Prim's purpose is to find a minimum spanning tree that connects all nodes in the graph; Dijkstra is concerned with only two nodes. Prim's does not evaluate the total weight of the path from the starting node, only the individual path.
Here's what clicked for me: think about which vertex the algorithm takes next:
Prim's algorithm takes next the vertex that's closest to the tree, i.e. closest to some vertex anywhere on the tree.
Dijkstra's algorithm takes next the vertex that is closest to the source.
Source: R. Sedgewick's lecture on Dijkstra's algorithm, Algorithms, Part II: https://coursera.org/share/a551af98e24292b6445c82a2a5f16b18
I was bothered with the same question lately, and I think I might share my understanding...
I think the key difference between these two algorithms (Dijkstra and Prim) roots in the problem they are designed to solve, namely, shortest path between two nodes and minimal spanning tree (MST). The formal is to find the shortest path between say, node s and t, and a rational requirement is to visit each edge of the graph at most once. However, it does NOT require us to visit all the node. The latter (MST) is to get us visit ALL the node (at most once), and with the same rational requirement of visiting each edge at most once too.
That being said, Dijkstra allows us to "take shortcut" so long I can get from s to t, without worrying the consequence - once I get to t, I am done! Although there is also a path from s to t in the MST, but this s-t path is created with considerations of all the rest nodes, therefore, this path can be longer than the s-t path found by the Dijstra's algorithm. Below is a quick example with 3 nodes:
2 2
(s) o ----- o ----- o (t)
| |
-----------------
3
Let's say each of the top edges has the cost of 2, and the bottom edge has cost of 3, then Dijktra will tell us to the take the bottom path, since we don't care about the middle node. On the other hand, Prim will return us a MST with the top 2 edges, discarding the bottom edge.
Such difference is also reflected from the subtle difference in the implementations: in Dijkstra's algorithm, one needs to have a book keeping step (for every node) to update the shortest path from s, after absorbing a new node, whereas in Prim's algorithm, there is no such need.
The simplest explanation is in Prims you don't specify the Starting Node, but in dijsktra you (Need to have a starting node) have to find shortest path from the given node to all other nodes.
The key difference between the basic algorithms lies in their different edge-selection criteria. Generally, they both use a priority queue for selecting next nodes, but have different criteria to select the adjacent nodes of current processing nodes: Prim's Algorithm requires the next adjacent nodes must be also kept in the queue, while Dijkstra's Algorithm does not:
def dijkstra(g, s):
q <- make_priority_queue(VERTEX.distance)
for each vertex v in g.vertex:
v.distance <- infinite
v.predecessor ~> nil
q.add(v)
s.distance <- 0
while not q.is_empty:
u <- q.extract_min()
for each adjacent vertex v of u:
...
def prim(g, s):
q <- make_priority_queue(VERTEX.distance)
for each vertex v in g.vertex:
v.distance <- infinite
v.predecessor ~> nil
q.add(v)
s.distance <- 0
while not q.is_empty:
u <- q.extract_min()
for each adjacent vertex v of u:
if v in q and weight(u, v) < v.distance:// <-------selection--------
...
The calculations of vertex.distance are the second different point.
Dijkstras algorithm is used only to find shortest path.
In Minimum Spanning tree(Prim's or Kruskal's algorithm) you get minimum egdes with minimum edge value.
For example:- Consider a situation where you wan't to create a huge network for which u will be requiring a large number of wires so these counting of wire can be done using Minimum Spanning Tree(Prim's or Kruskal's algorithm) (i.e it will give you minimum number of wires to create huge wired network connection with minimum cost).
Whereas "Dijkstras algorithm" will be used to get the shortest path between two nodes while connecting any nodes with each other.
Dijkstra's algorithm is a single source shortest path problem between node i and j, but Prim's algorithm a minimal spanning tree problem. These algorithm use programming concept named 'greedy algorithm'
If you check these notion, please visit
Greedy algorithm lecture note : http://jeffe.cs.illinois.edu/teaching/algorithms/notes/07-greedy.pdf
Minimum spanning tree : http://jeffe.cs.illinois.edu/teaching/algorithms/notes/20-mst.pdf
Single source shortest path : http://jeffe.cs.illinois.edu/teaching/algorithms/notes/21-sssp.pdf
#templatetypedef has covered difference between MST and shortest path. I've covered the algorithm difference in another So answer by demonstrating that both can be implemented using same generic algorithm that takes one more parameter as input: function f(u,v). The difference between Prim and Dijkstra's algorithm is simply which f(u,v) you use.
At the code level, the other difference is the API.
You initialize Prim with a source vertex, s, i.e., Prim.new(s); s can be any vertex, and regardless of s, the end result, which are the edges of the minimum spanning tree (MST) are the same. To get the MST edges, we call the method edges().
You initialize Dijkstra with a source vertex, s, i.e., Dijkstra.new(s) that you want to get shortest path/distance to all other vertices. The end results, which are the shortest path/distance from s to all other vertices; are different depending on the s. To get the shortest paths/distances from s to any vertex, v, we call the methods distanceTo(v) and pathTo(v) respectively.
They both create trees with the greedy method.
With Prim's algorithm we find minimum cost spanning tree. The goal is to find minimum cost to cover all nodes.
with Dijkstra we find Single Source Shortest Path. The goal is find the shortest path from the source to every other node
Prim’s algorithm works exactly as Dijkstra’s, except
It does not keep track of the distance from the source.
Storing the edge that connected the front of the visited vertices to the next closest vertex.
The vertex used as “source” for Prim’s algorithm is
going to be the root of the MST.
I have an algorithm to determine, in a DAG, the number of paths from each vertex to a specific vertex t (which has out-degree equal to 0). Now I choose other specific vertex s with 0 in-degree. I have to develop another algorithm to determine, for each edge (u, v), the number of paths that run through (u, v) from s to t in O(|V|+|E|).
I have tried to modify the BFS (since with a DFS I think is impossible to reach the solution) but if I have an edge with more than one paths, it doesn't work. Could you suggest me or give me a hint about how can I focus my work to get the solution?
By the way, the problem is related to topological sort.
Thanks so much in advance! :)
You already have an answer from your previous question to find number of paths from all vertices to a target node t.
So, in specific, using this algorithm, you have #paths from v to t.
Using this algorithm, you can also find paths from s to u.
The total number of paths from s to t that uses (u,v) is exactly #paths(s,u) * #paths(v,t)
Explanation:
Number of paths from s to u is given from correctness of algorithm. You have exactly one choice to go forward to v, thus number of paths from s to v is also the same number. Now, you can continue from v to t using each of the #paths(v,t), giving you total of #paths(s,u)*#paths(v,t)
Complexity:
The algorithm requries to find twice number of paths from node a to node b, each is O(V+E), so the complexity of this algorithm is also O(V+E)
Attachment: algorithm to find #paths from all vertices to a target node t:
Topological sort the vertices, let the ordered vertices be v1,v2,...,vn
create new array of size t, let it be arr
init: arr[t] = 1
for i from t-1 to 1 (descending, inclusive):
arr[i] = 0
for each edge (v_i,v_j) such that i < j <= t:
arr[i] += arr[j]
Proof and analysis in the original question (linked).
What is the exact difference between Dijkstra's and Prim's algorithms? I know Prim's will give a MST but the tree generated by Dijkstra will also be a MST. Then what is the exact difference?
Prim's algorithm constructs a minimum spanning tree for the graph, which is a tree that connects all nodes in the graph and has the least total cost among all trees that connect all the nodes. However, the length of a path between any two nodes in the MST might not be the shortest path between those two nodes in the original graph. MSTs are useful, for example, if you wanted to physically wire up the nodes in the graph to provide electricity to them at the least total cost. It doesn't matter that the path length between two nodes might not be optimal, since all you care about is the fact that they're connected.
Dijkstra's algorithm constructs a shortest path tree starting from some source node. A shortest path tree is a tree that connects all nodes in the graph back to the source node and has the property that the length of any path from the source node to any other node in the graph is minimized. This is useful, for example, if you wanted to build a road network that made it as efficient as possible for everyone to get to some major important landmark. However, the shortest path tree is not guaranteed to be a minimum spanning tree, and the sum of the costs on the edges of a shortest-path tree can be much larger than the cost of an MST.
Another important difference concerns what types of graphs the algorithms work on. Prim's algorithm works on undirected graphs only, since the concept of an MST assumes that graphs are inherently undirected. (There is something called a "minimum spanning arborescence" for directed graphs, but algorithms to find them are much more complicated). Dijkstra's algorithm will work fine on directed graphs, since shortest path trees can indeed be directed. Additionally, Dijkstra's algorithm does not necessarily yield the correct solution in graphs containing negative edge weights, while Prim's algorithm can handle this.
Dijkstra's algorithm doesn't create a MST, it finds the shortest path.
Consider this graph
5 5
s *-----*-----* t
\ /
-------
9
The shortest path is 9, while the MST is a different 'path' at 10.
Prim and Dijkstra algorithms are almost the same, except for the "relax function".
Prim:
MST-PRIM (G, w, r) {
for each key ∈ G.V
u.key = ∞
u.parent = NIL
r.key = 0
Q = G.V
while (Q ≠ ø)
u = Extract-Min(Q)
for each v ∈ G.Adj[u]
if (v ∈ Q)
alt = w(u,v) <== relax function, Pay attention here
if alt < v.key
v.parent = u
v.key = alt
}
Dijkstra:
Dijkstra (G, w, r) {
for each key ∈ G.V
u.key = ∞
u.parent = NIL
r.key = 0
Q = G.V
while (Q ≠ ø)
u = Extract-Min(Q)
for each v ∈ G.Adj[u]
if (v ∈ Q)
alt = w(u,v) + u.key <== relax function, Pay attention here
if alt < v.key
v.parent = u
v.key = alt
}
The only difference is pointed out by the arrow, which is the relax function.
The Prim, which searches for the minimum spanning tree, only cares about the minimum of the total edges cover all the vertices. The relax function is alt = w(u,v)
The Dijkstra, which searches for the minimum path length, so it cares about the edge accumulation. The relax function is alt = w(u,v) + u.key
Dijsktra's algorithm finds the minimum distance from node i to all nodes (you specify i). So in return you get the minimum distance tree from node i.
Prims algorithm gets you the minimum spaning tree for a given graph. A tree that connects all nodes while the sum of all costs is the minimum possible.
So with Dijkstra you can go from the selected node to any other with the minimum cost, you don't get this with Prim's
The only difference I see is that Prim's algorithm stores a minimum cost edge whereas Dijkstra's algorithm stores the total cost from a source vertex to the current vertex.
Dijkstra gives you a way from the source node to the destination node such that the cost is minimum. However Prim's algorithm gives you a minimum spanning tree such that all nodes are connected and the total cost is minimum.
In simple words:
So, if you want to deploy a train to connecte several cities, you would use Prim's algo. But if you want to go from one city to other saving as much time as possible, you'd use Dijkstra's algo.
Both can be implemented using exactly same generic algorithm as follows:
Inputs:
G: Graph
s: Starting vertex (any for Prim, source for Dijkstra)
f: a function that takes vertices u and v, returns a number
Generic(G, s, f)
Q = Enqueue all V with key = infinity, parent = null
s.key = 0
While Q is not empty
u = dequeue Q
For each v in adj(u)
if v is in Q and v.key > f(u,v)
v.key = f(u,v)
v.parent = u
For Prim, pass f = w(u, v) and for Dijkstra pass f = u.key + w(u, v).
Another interesting thing is that above Generic can also implement Breadth First Search (BFS) although it would be overkill because expensive priority queue is not really required. To turn above Generic algorithm in to BFS, pass f = u.key + 1 which is same as enforcing all weights to 1 (i.e. BFS gives minimum number of edges required to traverse from point A to B).
Intuition
Here's one good way to think about above generic algorithm: We start with two buckets A and B. Initially, put all your vertices in B so the bucket A is empty. Then we move one vertex from B to A. Now look at all the edges from vertices in A that crosses over to the vertices in B. We chose the one edge using some criteria from these cross-over edges and move corresponding vertex from B to A. Repeat this process until B is empty.
A brute force way to implement this idea would be to maintain a priority queue of the edges for the vertices in A that crosses over to B. Obviously that would be troublesome if graph was not sparse. So question would be can we instead maintain priority queue of vertices? This in fact we can as our decision finally is which vertex to pick from B.
Historical Context
It's interesting that the generic version of the technique behind both algorithms is conceptually as old as 1930 even when electronic computers weren't around.
The story starts with Otakar Borůvka who needed an algorithm for a family friend trying to figure out how to connect cities in the country of Moravia (now part of the Czech Republic) with minimal cost electric lines. He published his algorithm in 1926 in a mathematics related journal, as Computer Science didn't existed then. This came to the attention to Vojtěch Jarník who thought of an improvement on Borůvka's algorithm and published it in 1930. He in fact discovered the same algorithm that we now know as Prim's algorithm who re-discovered it in 1957.
Independent of all these, in 1956 Dijkstra needed to write a program to demonstrate the capabilities of a new computer his institute had developed. He thought it would be cool to have computer find connections to travel between two cities of the Netherlands. He designed the algorithm in 20 minutes. He created a graph of 64 cities with some simplifications (because his computer was 6-bit) and wrote code for this 1956 computer. However he didn't published his algorithm because primarily there were no computer science journals and he thought this may not be very important. The next year he learned about the problem of connecting terminals of new computers such that the length of wires was minimized. He thought about this problem and re-discovered Jarník/Prim's algorithm which again uses the same technique as the shortest path algorithm he had discovered a year before. He mentioned that both of his algorithms were designed without using pen or paper. In 1959 he published both algorithms in a paper that is just 2 and a half page long.
Dijkstra finds the shortest path between it's beginning node
and every other node. So in return you get the minimum distance tree from beginning node i.e. you can reach every other node as efficiently as possible.
Prims algorithm gets you the MST for a given graph i.e. a tree that connects all nodes while the sum of all costs is the minimum possible.
To make a story short with a realistic example:
Dijkstra wants to know the shortest path to each destination point by saving traveling time and fuel.
Prim wants to know how to efficiently deploy a train rail system i.e. saving material costs.
Directly from Dijkstra's Algorithm's wikipedia article:
The process that underlies Dijkstra's algorithm is similar to the greedy process used in Prim's algorithm. Prim's purpose is to find a minimum spanning tree that connects all nodes in the graph; Dijkstra is concerned with only two nodes. Prim's does not evaluate the total weight of the path from the starting node, only the individual path.
Here's what clicked for me: think about which vertex the algorithm takes next:
Prim's algorithm takes next the vertex that's closest to the tree, i.e. closest to some vertex anywhere on the tree.
Dijkstra's algorithm takes next the vertex that is closest to the source.
Source: R. Sedgewick's lecture on Dijkstra's algorithm, Algorithms, Part II: https://coursera.org/share/a551af98e24292b6445c82a2a5f16b18
I was bothered with the same question lately, and I think I might share my understanding...
I think the key difference between these two algorithms (Dijkstra and Prim) roots in the problem they are designed to solve, namely, shortest path between two nodes and minimal spanning tree (MST). The formal is to find the shortest path between say, node s and t, and a rational requirement is to visit each edge of the graph at most once. However, it does NOT require us to visit all the node. The latter (MST) is to get us visit ALL the node (at most once), and with the same rational requirement of visiting each edge at most once too.
That being said, Dijkstra allows us to "take shortcut" so long I can get from s to t, without worrying the consequence - once I get to t, I am done! Although there is also a path from s to t in the MST, but this s-t path is created with considerations of all the rest nodes, therefore, this path can be longer than the s-t path found by the Dijstra's algorithm. Below is a quick example with 3 nodes:
2 2
(s) o ----- o ----- o (t)
| |
-----------------
3
Let's say each of the top edges has the cost of 2, and the bottom edge has cost of 3, then Dijktra will tell us to the take the bottom path, since we don't care about the middle node. On the other hand, Prim will return us a MST with the top 2 edges, discarding the bottom edge.
Such difference is also reflected from the subtle difference in the implementations: in Dijkstra's algorithm, one needs to have a book keeping step (for every node) to update the shortest path from s, after absorbing a new node, whereas in Prim's algorithm, there is no such need.
The simplest explanation is in Prims you don't specify the Starting Node, but in dijsktra you (Need to have a starting node) have to find shortest path from the given node to all other nodes.
The key difference between the basic algorithms lies in their different edge-selection criteria. Generally, they both use a priority queue for selecting next nodes, but have different criteria to select the adjacent nodes of current processing nodes: Prim's Algorithm requires the next adjacent nodes must be also kept in the queue, while Dijkstra's Algorithm does not:
def dijkstra(g, s):
q <- make_priority_queue(VERTEX.distance)
for each vertex v in g.vertex:
v.distance <- infinite
v.predecessor ~> nil
q.add(v)
s.distance <- 0
while not q.is_empty:
u <- q.extract_min()
for each adjacent vertex v of u:
...
def prim(g, s):
q <- make_priority_queue(VERTEX.distance)
for each vertex v in g.vertex:
v.distance <- infinite
v.predecessor ~> nil
q.add(v)
s.distance <- 0
while not q.is_empty:
u <- q.extract_min()
for each adjacent vertex v of u:
if v in q and weight(u, v) < v.distance:// <-------selection--------
...
The calculations of vertex.distance are the second different point.
Dijkstras algorithm is used only to find shortest path.
In Minimum Spanning tree(Prim's or Kruskal's algorithm) you get minimum egdes with minimum edge value.
For example:- Consider a situation where you wan't to create a huge network for which u will be requiring a large number of wires so these counting of wire can be done using Minimum Spanning Tree(Prim's or Kruskal's algorithm) (i.e it will give you minimum number of wires to create huge wired network connection with minimum cost).
Whereas "Dijkstras algorithm" will be used to get the shortest path between two nodes while connecting any nodes with each other.
Dijkstra's algorithm is a single source shortest path problem between node i and j, but Prim's algorithm a minimal spanning tree problem. These algorithm use programming concept named 'greedy algorithm'
If you check these notion, please visit
Greedy algorithm lecture note : http://jeffe.cs.illinois.edu/teaching/algorithms/notes/07-greedy.pdf
Minimum spanning tree : http://jeffe.cs.illinois.edu/teaching/algorithms/notes/20-mst.pdf
Single source shortest path : http://jeffe.cs.illinois.edu/teaching/algorithms/notes/21-sssp.pdf
#templatetypedef has covered difference between MST and shortest path. I've covered the algorithm difference in another So answer by demonstrating that both can be implemented using same generic algorithm that takes one more parameter as input: function f(u,v). The difference between Prim and Dijkstra's algorithm is simply which f(u,v) you use.
At the code level, the other difference is the API.
You initialize Prim with a source vertex, s, i.e., Prim.new(s); s can be any vertex, and regardless of s, the end result, which are the edges of the minimum spanning tree (MST) are the same. To get the MST edges, we call the method edges().
You initialize Dijkstra with a source vertex, s, i.e., Dijkstra.new(s) that you want to get shortest path/distance to all other vertices. The end results, which are the shortest path/distance from s to all other vertices; are different depending on the s. To get the shortest paths/distances from s to any vertex, v, we call the methods distanceTo(v) and pathTo(v) respectively.
They both create trees with the greedy method.
With Prim's algorithm we find minimum cost spanning tree. The goal is to find minimum cost to cover all nodes.
with Dijkstra we find Single Source Shortest Path. The goal is find the shortest path from the source to every other node
Prim’s algorithm works exactly as Dijkstra’s, except
It does not keep track of the distance from the source.
Storing the edge that connected the front of the visited vertices to the next closest vertex.
The vertex used as “source” for Prim’s algorithm is
going to be the root of the MST.
What is the exact difference between Dijkstra's and Prim's algorithms? I know Prim's will give a MST but the tree generated by Dijkstra will also be a MST. Then what is the exact difference?
Prim's algorithm constructs a minimum spanning tree for the graph, which is a tree that connects all nodes in the graph and has the least total cost among all trees that connect all the nodes. However, the length of a path between any two nodes in the MST might not be the shortest path between those two nodes in the original graph. MSTs are useful, for example, if you wanted to physically wire up the nodes in the graph to provide electricity to them at the least total cost. It doesn't matter that the path length between two nodes might not be optimal, since all you care about is the fact that they're connected.
Dijkstra's algorithm constructs a shortest path tree starting from some source node. A shortest path tree is a tree that connects all nodes in the graph back to the source node and has the property that the length of any path from the source node to any other node in the graph is minimized. This is useful, for example, if you wanted to build a road network that made it as efficient as possible for everyone to get to some major important landmark. However, the shortest path tree is not guaranteed to be a minimum spanning tree, and the sum of the costs on the edges of a shortest-path tree can be much larger than the cost of an MST.
Another important difference concerns what types of graphs the algorithms work on. Prim's algorithm works on undirected graphs only, since the concept of an MST assumes that graphs are inherently undirected. (There is something called a "minimum spanning arborescence" for directed graphs, but algorithms to find them are much more complicated). Dijkstra's algorithm will work fine on directed graphs, since shortest path trees can indeed be directed. Additionally, Dijkstra's algorithm does not necessarily yield the correct solution in graphs containing negative edge weights, while Prim's algorithm can handle this.
Dijkstra's algorithm doesn't create a MST, it finds the shortest path.
Consider this graph
5 5
s *-----*-----* t
\ /
-------
9
The shortest path is 9, while the MST is a different 'path' at 10.
Prim and Dijkstra algorithms are almost the same, except for the "relax function".
Prim:
MST-PRIM (G, w, r) {
for each key ∈ G.V
u.key = ∞
u.parent = NIL
r.key = 0
Q = G.V
while (Q ≠ ø)
u = Extract-Min(Q)
for each v ∈ G.Adj[u]
if (v ∈ Q)
alt = w(u,v) <== relax function, Pay attention here
if alt < v.key
v.parent = u
v.key = alt
}
Dijkstra:
Dijkstra (G, w, r) {
for each key ∈ G.V
u.key = ∞
u.parent = NIL
r.key = 0
Q = G.V
while (Q ≠ ø)
u = Extract-Min(Q)
for each v ∈ G.Adj[u]
if (v ∈ Q)
alt = w(u,v) + u.key <== relax function, Pay attention here
if alt < v.key
v.parent = u
v.key = alt
}
The only difference is pointed out by the arrow, which is the relax function.
The Prim, which searches for the minimum spanning tree, only cares about the minimum of the total edges cover all the vertices. The relax function is alt = w(u,v)
The Dijkstra, which searches for the minimum path length, so it cares about the edge accumulation. The relax function is alt = w(u,v) + u.key
Dijsktra's algorithm finds the minimum distance from node i to all nodes (you specify i). So in return you get the minimum distance tree from node i.
Prims algorithm gets you the minimum spaning tree for a given graph. A tree that connects all nodes while the sum of all costs is the minimum possible.
So with Dijkstra you can go from the selected node to any other with the minimum cost, you don't get this with Prim's
The only difference I see is that Prim's algorithm stores a minimum cost edge whereas Dijkstra's algorithm stores the total cost from a source vertex to the current vertex.
Dijkstra gives you a way from the source node to the destination node such that the cost is minimum. However Prim's algorithm gives you a minimum spanning tree such that all nodes are connected and the total cost is minimum.
In simple words:
So, if you want to deploy a train to connecte several cities, you would use Prim's algo. But if you want to go from one city to other saving as much time as possible, you'd use Dijkstra's algo.
Both can be implemented using exactly same generic algorithm as follows:
Inputs:
G: Graph
s: Starting vertex (any for Prim, source for Dijkstra)
f: a function that takes vertices u and v, returns a number
Generic(G, s, f)
Q = Enqueue all V with key = infinity, parent = null
s.key = 0
While Q is not empty
u = dequeue Q
For each v in adj(u)
if v is in Q and v.key > f(u,v)
v.key = f(u,v)
v.parent = u
For Prim, pass f = w(u, v) and for Dijkstra pass f = u.key + w(u, v).
Another interesting thing is that above Generic can also implement Breadth First Search (BFS) although it would be overkill because expensive priority queue is not really required. To turn above Generic algorithm in to BFS, pass f = u.key + 1 which is same as enforcing all weights to 1 (i.e. BFS gives minimum number of edges required to traverse from point A to B).
Intuition
Here's one good way to think about above generic algorithm: We start with two buckets A and B. Initially, put all your vertices in B so the bucket A is empty. Then we move one vertex from B to A. Now look at all the edges from vertices in A that crosses over to the vertices in B. We chose the one edge using some criteria from these cross-over edges and move corresponding vertex from B to A. Repeat this process until B is empty.
A brute force way to implement this idea would be to maintain a priority queue of the edges for the vertices in A that crosses over to B. Obviously that would be troublesome if graph was not sparse. So question would be can we instead maintain priority queue of vertices? This in fact we can as our decision finally is which vertex to pick from B.
Historical Context
It's interesting that the generic version of the technique behind both algorithms is conceptually as old as 1930 even when electronic computers weren't around.
The story starts with Otakar Borůvka who needed an algorithm for a family friend trying to figure out how to connect cities in the country of Moravia (now part of the Czech Republic) with minimal cost electric lines. He published his algorithm in 1926 in a mathematics related journal, as Computer Science didn't existed then. This came to the attention to Vojtěch Jarník who thought of an improvement on Borůvka's algorithm and published it in 1930. He in fact discovered the same algorithm that we now know as Prim's algorithm who re-discovered it in 1957.
Independent of all these, in 1956 Dijkstra needed to write a program to demonstrate the capabilities of a new computer his institute had developed. He thought it would be cool to have computer find connections to travel between two cities of the Netherlands. He designed the algorithm in 20 minutes. He created a graph of 64 cities with some simplifications (because his computer was 6-bit) and wrote code for this 1956 computer. However he didn't published his algorithm because primarily there were no computer science journals and he thought this may not be very important. The next year he learned about the problem of connecting terminals of new computers such that the length of wires was minimized. He thought about this problem and re-discovered Jarník/Prim's algorithm which again uses the same technique as the shortest path algorithm he had discovered a year before. He mentioned that both of his algorithms were designed without using pen or paper. In 1959 he published both algorithms in a paper that is just 2 and a half page long.
Dijkstra finds the shortest path between it's beginning node
and every other node. So in return you get the minimum distance tree from beginning node i.e. you can reach every other node as efficiently as possible.
Prims algorithm gets you the MST for a given graph i.e. a tree that connects all nodes while the sum of all costs is the minimum possible.
To make a story short with a realistic example:
Dijkstra wants to know the shortest path to each destination point by saving traveling time and fuel.
Prim wants to know how to efficiently deploy a train rail system i.e. saving material costs.
Directly from Dijkstra's Algorithm's wikipedia article:
The process that underlies Dijkstra's algorithm is similar to the greedy process used in Prim's algorithm. Prim's purpose is to find a minimum spanning tree that connects all nodes in the graph; Dijkstra is concerned with only two nodes. Prim's does not evaluate the total weight of the path from the starting node, only the individual path.
Here's what clicked for me: think about which vertex the algorithm takes next:
Prim's algorithm takes next the vertex that's closest to the tree, i.e. closest to some vertex anywhere on the tree.
Dijkstra's algorithm takes next the vertex that is closest to the source.
Source: R. Sedgewick's lecture on Dijkstra's algorithm, Algorithms, Part II: https://coursera.org/share/a551af98e24292b6445c82a2a5f16b18
I was bothered with the same question lately, and I think I might share my understanding...
I think the key difference between these two algorithms (Dijkstra and Prim) roots in the problem they are designed to solve, namely, shortest path between two nodes and minimal spanning tree (MST). The formal is to find the shortest path between say, node s and t, and a rational requirement is to visit each edge of the graph at most once. However, it does NOT require us to visit all the node. The latter (MST) is to get us visit ALL the node (at most once), and with the same rational requirement of visiting each edge at most once too.
That being said, Dijkstra allows us to "take shortcut" so long I can get from s to t, without worrying the consequence - once I get to t, I am done! Although there is also a path from s to t in the MST, but this s-t path is created with considerations of all the rest nodes, therefore, this path can be longer than the s-t path found by the Dijstra's algorithm. Below is a quick example with 3 nodes:
2 2
(s) o ----- o ----- o (t)
| |
-----------------
3
Let's say each of the top edges has the cost of 2, and the bottom edge has cost of 3, then Dijktra will tell us to the take the bottom path, since we don't care about the middle node. On the other hand, Prim will return us a MST with the top 2 edges, discarding the bottom edge.
Such difference is also reflected from the subtle difference in the implementations: in Dijkstra's algorithm, one needs to have a book keeping step (for every node) to update the shortest path from s, after absorbing a new node, whereas in Prim's algorithm, there is no such need.
The simplest explanation is in Prims you don't specify the Starting Node, but in dijsktra you (Need to have a starting node) have to find shortest path from the given node to all other nodes.
The key difference between the basic algorithms lies in their different edge-selection criteria. Generally, they both use a priority queue for selecting next nodes, but have different criteria to select the adjacent nodes of current processing nodes: Prim's Algorithm requires the next adjacent nodes must be also kept in the queue, while Dijkstra's Algorithm does not:
def dijkstra(g, s):
q <- make_priority_queue(VERTEX.distance)
for each vertex v in g.vertex:
v.distance <- infinite
v.predecessor ~> nil
q.add(v)
s.distance <- 0
while not q.is_empty:
u <- q.extract_min()
for each adjacent vertex v of u:
...
def prim(g, s):
q <- make_priority_queue(VERTEX.distance)
for each vertex v in g.vertex:
v.distance <- infinite
v.predecessor ~> nil
q.add(v)
s.distance <- 0
while not q.is_empty:
u <- q.extract_min()
for each adjacent vertex v of u:
if v in q and weight(u, v) < v.distance:// <-------selection--------
...
The calculations of vertex.distance are the second different point.
Dijkstras algorithm is used only to find shortest path.
In Minimum Spanning tree(Prim's or Kruskal's algorithm) you get minimum egdes with minimum edge value.
For example:- Consider a situation where you wan't to create a huge network for which u will be requiring a large number of wires so these counting of wire can be done using Minimum Spanning Tree(Prim's or Kruskal's algorithm) (i.e it will give you minimum number of wires to create huge wired network connection with minimum cost).
Whereas "Dijkstras algorithm" will be used to get the shortest path between two nodes while connecting any nodes with each other.
Dijkstra's algorithm is a single source shortest path problem between node i and j, but Prim's algorithm a minimal spanning tree problem. These algorithm use programming concept named 'greedy algorithm'
If you check these notion, please visit
Greedy algorithm lecture note : http://jeffe.cs.illinois.edu/teaching/algorithms/notes/07-greedy.pdf
Minimum spanning tree : http://jeffe.cs.illinois.edu/teaching/algorithms/notes/20-mst.pdf
Single source shortest path : http://jeffe.cs.illinois.edu/teaching/algorithms/notes/21-sssp.pdf
#templatetypedef has covered difference between MST and shortest path. I've covered the algorithm difference in another So answer by demonstrating that both can be implemented using same generic algorithm that takes one more parameter as input: function f(u,v). The difference between Prim and Dijkstra's algorithm is simply which f(u,v) you use.
At the code level, the other difference is the API.
You initialize Prim with a source vertex, s, i.e., Prim.new(s); s can be any vertex, and regardless of s, the end result, which are the edges of the minimum spanning tree (MST) are the same. To get the MST edges, we call the method edges().
You initialize Dijkstra with a source vertex, s, i.e., Dijkstra.new(s) that you want to get shortest path/distance to all other vertices. The end results, which are the shortest path/distance from s to all other vertices; are different depending on the s. To get the shortest paths/distances from s to any vertex, v, we call the methods distanceTo(v) and pathTo(v) respectively.
They both create trees with the greedy method.
With Prim's algorithm we find minimum cost spanning tree. The goal is to find minimum cost to cover all nodes.
with Dijkstra we find Single Source Shortest Path. The goal is find the shortest path from the source to every other node
Prim’s algorithm works exactly as Dijkstra’s, except
It does not keep track of the distance from the source.
Storing the edge that connected the front of the visited vertices to the next closest vertex.
The vertex used as “source” for Prim’s algorithm is
going to be the root of the MST.