I am making a few edits on huge DTSX packages in Visual Studio (SSIS), and my target is to make a more tidy layout of the flows.
For this reason, I use to select part of the flows and then use the following menu:
Format > Auto Layout > Diagram
Format > Align > Center
Format > Make Same Size > Both
Format > Horizontal Spacing > Make Equal
Format > Vertical Spacing > Make Equal
Is there a key shortcut for these commands?
I looked over Google and the official Microsoft documentation, but I didn't find anything helpful in this direction.
By default, there are no default keyboard shortcuts assigned for the layout commands:
You can assign your own shortcuts!
In the top menu strip, go to Tools > Options.
Once the options dialog is shown, click on the keyboard section. And select the command you are looking to assign the shortcuts. In the "Show commands containing", type Format. to find the commands related to formatting, e.g. Format.Diagram, Format.MakeHorizontalSpacingEqual, etc. Then press the shortcut you want and click on the assign button (as shown below).
After assigning the shortcuts, you check the command you selected in the menu strip and note that the keyboard shortcut is shown beside it.
Related
Using VS2010 I wanted to turn on line numbering.
I went to:
Tools -> Options -> Environment with the intention of going to "All Languages" but the option wasn't there - neither was there an option for C# (which was the environment I specified at installation).
So I thought I just need to click "Show All Settings" in the bottom left corner... but it's not there.
All I really want is to turn on the line numbers but I'm kind of stumped without the right options being available.
Can anybody help with this?
From MSDN
To display line numbers in code
1.
On the menu bar, choose Tools, Options.
2.
In the categories list on the left side of the Options window, expand the Text Editor node.
3.
Perform one of the following steps:
◦ To set this option globally, expand the All Languages subfolder.
Depending on your language or setttings, you may also need to select the Show All Settings check box in the Options window to reveal the All Languages subfolder that this procedure mentions.
◦To set this option for a specific language such as Basic, C#, F#, open the subfolder for that language.
4.
Choose the General option.
5.
In the Display section, choose Line numbers.
you can turn on the Line number by going to:
Tools>Option>Text Editor>All Languages> General> mark the the Checkbox of Line numbers as Checked.
Tools -> Options -> TextEditor -> AllLanguages
For C#
Tools -> Options -> TextEditor -> C#
I can't find the Reformat button, I know I can use ctrl+k+d, but I wish to have also the toolbar with the button. can someone help me ?
You can use Edit > Advanced > Format Document and you can also move this as a button to any toolbar. Go to Tools > Customize > Commands, select Toolbar and push Add Command button. Then select Edit category and find Document Format.
Apparently VS2010 (maybe others) hide certain commands depending on the style you choose. I chose Web Dev (code) as my choice and the Document Format is not present to be added to a toolbar. But, if I change to C# Code (tools>Import/Export) then the Document Format command is right there in the Edit menu where others here have said it is.
I had to import the C# Dev layout, but unchecked colors and code formatting options (so it won't overwrite those). What section you must import to get the format document button, I don't know, I didn't experiment that deep.
Seems stupid MS chose to force us down specific paths for layout with no convenient way to get out of it.
If you can't find it in the Edit menu: you can also find it if you press CTRL + P and then type >format. The shortcut is SHIFT + ALT + F
Is there any way to hack visual studio so that it displays the line numbers in smaller font size like the way Notepad++ does? I'm using Consolas at size 12 and the line numbers just look so ugly.
Thanks.
Tools > Options... > Environment Fonts and Colors > Display Items > Line Numbers
You should be able to mess with fonts and sizes there.
EDIT for the people whose hands need to be held:
Follow this click path after you open Visual Studio 2008 (most likely by double-clicking on its icon):
Tools > Options... > Environment Fonts and Colors
"Tools" is in the menu bar at the top of the screen, and is most likely the fourth option from the right. Once you click on "Tools" a menu should come down, and you should click the "Options..." option, which is the very very last one. A new window will pop up with some junk on the right and some more things to click on on the left. Those things on the left determine what options you'll be setting on the right. Click the "Environment Fonts and Colors" option, which should be the second option.
Then, make sure "Show Settings For:" is set to "Text Editor". Click on "Line Numbers" in the listbox that says "Display Items". It is located underneath the "Font (bold type indicates fixed-width fonts):" dropdown box (that textbox with the arrow on the right side that when you click it, a whole bunch of options show up). It should be the 5th option in the "Display Items" box. After you do this, you can adjust your font, font size, color, whatever your little heart desires.
Once you're done, make sure to hit the "OK" button in the lower right corner of the window where you just made all your adjustments. Your new settings should be reflected!
:\
Even though Jason is correct in his directions, he even answered your question in a round about way.
all text editor font is the same
when you have changed one of the font properties.
So in short. No you can not adjust individual fonts for items in the actual text editor, though you can adjust almost everything else through the Option dialog.
Hope this helps.
I am using visual studios 2008. My laptop has the max screen res of 1366x768.
What can i do to get more reading space? i was thinking of making the font smaller but it would be more helpful if i can make everything smaller (toolbar icons, text, etc)
The only improvement i done so far was remove a bunch of things under the toolbar so i have only one line. Actually for this project i remove the standard bar so i have have the solution and text directly under the menu with no toolbar. What else can i do to maximize reading space.
Tools > Options > Environment > General > Uncheck "Show status bar"
Tools > Options > Text Editor > All Languages > Uncheck "Navigation bar"
Install the "Hide Main Menu" extension available here.
Enable Auto-hide the taskbar in your Windows Taskbar properties.
That should get you at least 5-7 more lines.
Dual screens. The more pixels the better. I like 1920x1280 extended to across a matched monitor with vertically split tabs.
Probably not the answer you are looking for, but really, it HELPS A LOT.
Ok ok:
Try Lucida Console as a font - it's readable at 8pt - and fixed width!
Hit Alt+Shift+Enter to get into Full Screen mode.
Float all your "helper" windows and use Ctrl+Tab to get to them. (Click using mouse)
Pin your Windows Task Bar to the left or right of your screen to give more vertical reading space.
What I do is unpin all the various tool windows and views. Unpin the Solution Explorer, Properties viewer, Output etc. and the Toolbar. This leaves you with just the coding window and small bars around that allow you to hover over the edges of the window and see everything you just unpinned.
set the Solution explorer on the right to Auto-Hide, close the error window when possible (as in when you're not fixing errors), and try and drop the number of toolbars vertically to 1. You can also change the size of the text down by going to Tools > Options > Environment > Fonts and colors but i wouldn't shrink the text unless you have good vision. I recommend Consolas 12 Point for your code; it's a bit big but very nice looking!
I got rid of the toolbars altogether and made things like the Solution Explorer autohide. I came to the realisation that the only toolbar button I ever used was a custom tool one I'd put there (I use the menu for that now). I'm running at 1920x1200 so real estate wasnt an issue - I just wanted less visual distractions. Just me and the code.
I want to be able to edit one method while looking at another method in the same file, as reference.
Can this be done?
You can open the file in another tab (Window -> New Window).
Doing so you have two copies of the same file. Then you can right-click the tab bar and select New Vertical Tab Group (or New Horizontal Tab Group, the one you like more).
Hope I understood you question..
Be on the tab you want to duplicate,then click in the menu bar at the top onWindow > New Window
Finally drag & drop the second window to the the left or right side to show both views next to each other.
Et voila, there you have it :)
EDIT
It seems that this function is not implemented in all version of VS.
In my case (V 15.4.2 (2017), V 15.9.7 (2017) & V 16.2.5 (2019)) it just works fine.
Only vertically that I'm aware. When looking at the code, right above the vertical scroll bar is a small rectangle, drag it down to get a split view of the file.
You simply use the small drag arrows icon at the top right corner of your file window as depicted in the following screenshots:
1) View the same document side-by-side (with a fix for Visual Studio 2017)
It is possible to do this using New Window and New Vertical Tab Group, however, in my Visual Studio 2017 the New Window command was missing from the Window menu. To use it, first you must add the command to a menu or assign a shortcut to it.
To add New Window to your Window menu follow this sequence, starting with the Tools menu:
Tools > Customize > Commands > Menu Bar > Window > Add Command > Window > New Window
FYI In the Commands step you decide where to put the New Window command. The sequence I gave above puts it unceremoniously at the top of the Window menu.
To view the same document side-by-side
Open the document you want to view side-by-side
Select your recently added New Window command (perhaps it's in Window > New Window)
Right click the new tab and select New Vertical Tab Group or select that command from the Window menu
2) View the same document above-one-another
If you wish to view the same document in two views on top of each other use the Window > Split command or click-and-drag the double-arrow at the top of the scroll bar for any window.
3) Get creative
FYI You can even combine the two view options to have three, four or even more views of the same document on a particularly wide monitor. On mine (2560 x 1080) I can comfortably get three side-by-side views going and split them vertically, if desired.
One can install VsVim extension and :sp :vsp does the trick.
In Visual Studio 15 you can just click inside the document and then "Window → Split"