Quick question - I am trying to set it up so that when an e-mail arrives in a folder it creates a todo list. How do I get it such that it only does it for the last e-mail that is added. It seems to be replicating for each e-mail in the conversation rather than the latest one. In effect instead of value, I want: last(value)
Thanks in advance,
You need to use the Add a to-do (v3) without a loop. If a loop applied, it will apply the step to all the emails in the inbox.
It is tested, and works fine.
Make sure the Split On is enabled in the settings of the first step:
Related
I'm new to Microsoft CRM and Power Automate. I'm trying to implement the Quote approval process.
As the first step, I tried to create a simple workflow to trigger when a Quote item is saved/modified using Dataverse 'When a row is added, modified or deleted'. So, I have studied many online tutorials and done workflow very simple to send an email when a Quote item is saved/modified.
Problem is, It's actually not triggered with any action on the Quote page. Already spend a couple of days to figure out the issue.
This is how I tested it.
Step 01 - Save and test manually test flow
Step 02 - insert a new item to Quote or modify the existing item.
But nothing happens.
Items you add to the Quote are in fact Quote Product records. This is a separate table named quotedetail.
Your Power Automate flow needs to target the Quote Products table to capture the intended changes.
The reason was Administrative mode.
Administrative mode disables all asynchronous processes. This includes server-side sync (email synchronization) and workflow processes including flow (Power Automate).
https://functionalthoughts.com/microsoft-dynamics-365-managing-admin-mode-from-power-platform/
I am pretty new to power automate. I created a flow that triggers when an item is created or modified. It initializes some variables and then does some switch cases to assign values to each of them. The variables then go into an array and another variable is incremented to get the total of the array. I then have a conditional to assign a value to a column in the list. I tested the flow specifically going into the modern view of the list and clicking the save button. This worked a bunch of times and I sent it for user testing. One of the users edited multiple items by double clicking into the item which saves after each column change(which I assume triggers a run of the flow)
The flow seemingly works but seemed to get bogged down at a point based on run history. I let it sit overnight and then tested again and now it shows runs from multiple IDs at a time even though I only edited one specific one.
I had another developer take a look at my flow and he could not spot anything wrong with it and it never had a hard error in testing only warnings about conditionals causing a loop but all my conditionals rectify. Pictures included. I am just not sure of any caveats I might be missing.
I am currently letting the flow sit to see if it finishes getting caught up. I read about the concurrent run option as well as conditions on the trigger itself. I am curious as to why it seems to run on two records(or more) all at once without me or anyone editing each one.
You might be able to ignore the updates from the service account/account which is used in the connection of the actions by using the following trigger condition expression:
#not(equals(triggerOutputs()?['body/Editor/Claims'], 'i:0#.f|membership|johndoe#contoso.onmicrosoft.com'))
I am trying to push a event towards GA3, mimicking an event done by a browser towards GA. From this Event I want to fill Custom Dimensions(visibile in the user explorer and relate them to a GA ID which has visited the website earlier). Could this be done without influencing website data too much? I want to enrich someone's data from an external source.
So far I cant seem to find the minimum fields which has to be in the event call for this to work. Ive got these so far:
v=1&
_v=j96d&
a=1620641575&
t=event&
_s=1&
sd=24-bit&
sr=2560x1440&
vp=510x1287&
je=0&_u=QACAAEAB~&
jid=&
gjid=&
_u=QACAAEAB~&
cid=GAID&
tid=UA-x&
_gid=GAID&
gtm=gtm&
z=355736517&
uip=1.2.3.4&
ea=x&
el=x&
ec=x&
ni=1&
cd1=GAID&
cd2=Companyx&
dl=https%3A%2F%2Fexample.nl%2F&
ul=nl-nl&
de=UTF-8&
dt=example&
cd3=CEO
So far the Custom dimension fields dont get overwritten with new values. Who knows which is missing or can share a list of neccesary fields and example values?
Ok, a few things:
CD value will be overwritten only if in GA this CD's scope is set to the user-level. Make sure it is.
You need to know the client id of the user. You can confirm that you're having the right CID by using the user explorer in GA interface unless you track it in a CD. It allows filtering by client id.
You want to make this hit non-interactional, otherwise you're inflating the session number since G will generate sessions for normal hits. non-interactional hit would have ni=1 among the params.
Wait. Scope calculations don't happen immediately in real-time. They happen later on. Give it two days and then check the results and re-conduct your experiment.
Use a throwaway/test/lower GA property to experiment. You don't want to affect the production data while not knowing exactly what you do.
There. A good use case for such an activity would be something like updating a life time value of existing users and wanting to enrich the data with it without waiting for all of them to come in. That's useful for targeting, attribution and more.
Thank you.
This is the case. all CD's are user Scoped.
This is the case, we are collecting them.
ni=1 is within the parameters of each event call.
There are so many parameters, which parameters are neccesary?
we are using a test property for this.
We also got he Bot filtering checked out:
Bot filtering
It's hard to test when the User Explorer has a delay of 2 days and we are still not sure which parameters to use and which not. Who could help on the parameter part? My only goal is to update de CD's on the person. Who knows which parameters need to be part of the event call?
My pipedrive deals are sorted in different pipeline that I can find easily with this kind of request :
api.pipedrive.com/v1/pipelines/ID_PIPELINE?api_token=######
So what I was doing until now is to send data to
api.pipedrive.com/v1/organizations
api.pipedrive.com/v1/persons
api.pipedrive.com/v1/deals
api.pipedrive.com/v1/notes
And I send it to the user info#, which is link to a form type "contact-us"
What happen is that it goes by default to the primary pipeline, associated to info#
We created a second pipeline, also associated to info# and when I am sending organizations / persons etc, I am asked if it's possible to send it directly into the new pipeline instead of the "default one".
Like api.pipedrive.com/v1/pipelines/ID_PIPELINE/organizations?api_token=######
etc
At the moment I haven't find a clue about it, I wanted confirmation.
I get it now. You can't add a deal straight to a Pipeline. But you can do so in Stage.
So what I did was get the specific Pipeline and then get the first Stage in its list and then use that Stage ID to add the Deal in.
PS. I'm going to improve this answer later. But basically that's the gist of how to achieve what you want to do.
Ho everyone, I'm in trouble with my campaign, this happened to me... when i go to my list to see the data of the recipients.
It is asking me to create a reconfirmation Campaign, due to a too high volume of unsubscribed to this campaign.
Here the path I've been following to realise my campaign ( It is the first time I'm using Mailchimp):
I have an invitation to a event where guest can approve or decline the invitation.
When they Accept the invitation: it bring to the update profile form - which icahnge in the advence editor. This way We can record some data such as dietary requirements,etc which would be recorder to our subscriber list ons submit.
When people decline the invitation, we have link to the unsubscribe form. This way we are able to know Which person has decline the invitation.
From what I understand, this is way It stopped our campaign.
What I'm looking to achieve . . . and din't manage i slept 2 hours last night trying to make this work . .. and i m in a big rush :
How can I achieve to collect data with the path explain previously, without having this issue in the future - so without using the unsubscribe from - but two different forms ?
How can I access to the List of User who have accept the invitation, so I mean the Subscriber List. because since that happen, I can't access it - and obviously i don't want to send another email to the guests asking them to fill up again.
I really appreciate all the help that anybody can provide me with that,
Thank you guys !
If I'm understanding you correctly, you're trying to use list subscriptions to stand-in for RSVPs? That is likely to look really bad -- ESPs see high volumes of unsubscribes as suspiciously spammy -- you'd be better off using Interests or Merge Fields on your list to denote the user's RSVP rather than asking them to unsubscribe. As for your current account, follow the instructions in the email you received if you want to get your list back up and running again.