I have a Google Pro + account and facing problem with working in Google colab. The processing time of my ipynb file normally is 8 hours.
But now, from yesterday it is taking too much time in processing. its more than 25 hours and my process is still not completed.
Runtime is also disconnecting again and again.
Related
The Mac has decided to freeze and restart several times a day while I'm using it.
panic (cpu 2 caller 0xffffff801a579938): watchdog timeout: no checkins from watchdogd in 93 seconds .....
Used the repair disk utility tool multiple times in different recovery modes.
I Used every free admin fixing tool, clean up tool and error reporting tool on the app store.
Launched my Mac in all sorts of different recovery modes. I literally pressed and used every restart keyboard combination you can with a Mac. And I used them several times over and over in different scenarios.
Spent hours researching every forum and reading every article of similar problems and solutions.
Download the manual updates and installed them each separately
After a day of frustration i found then solution
The fans internal sensor wasn’t working any more.
I set the automatic controls using Macs Fan Control app and in Custom switched to Sensor-based value and selected CPU PECI from drop down and set 30 in Temperature that the fan speed will start to increase from and 90 in Max temperature. Fans now kicking in and cooling down the processors and preventing from re-starting.
Source
This just started happening for no good reason I can find.
If I launch the MSACCESS.EXE program, then open a database. The database opens within 1 second.
If I launch the same database by double-clicking on the .accdb file's icon. It takes about 40 seconds for the Access window to appear, and less than 1 second after that the database opens.
The database is local, and both Access and the DB are on an SSD. The system is an Asus Z97 motherboard, i7-4790K # 4MHz (not overclocked) with 32gb RAM and about 200gb of free hard disk space.
In both cases, performance after opening is excellent with no issues. It appears it's only the launching of MSACCESS.EXE by double-clicking a .accdb file that is affected. I double-checked the file association for .accdb and it points to the correct executable.
I captured some data with Performance Monitor during the 40-second pause. MSACCESS.EXE is using about 0.4% CPU, doing almost no disk I/O, and there's no network activity.
I've already tried "Compact and Repair" but that had no effect.
This just started happening, and now seems to be affecting Access on ALL .accdb files. They open instantly from within Access but take 40 seconds to open when double-clicked. I haven't installed any new software or Windows updates recently.
Curiously, if I change the .accdb extension to .accdr (runs the db in the client runtime instead of full Access) the database will launch instantly.
What could possibly be going on here? I've searched the web and found some posts having to do with databases on a network share, but that doesn't apply here.
For anyone else encountering this issue, it appears this bug has nothing to do with Access specifically.
I needed to shutdown the machine, and when I did so, Windows seemed to completely ignore multiple shutdown requests. As I was googling to troubleshoot, after about 10 minutes, the shutdown did finally start. It took another 10 minutes to shutdown.
After rebooting the slow launch problem no longer occurs, there's only about a 2 second delay, which I assume is just MSACCESS.EXE loading "cold".
So, the problem is most likely in Windows and not Access.
I spent ages looking for the answers to this on various sites but eventually cobbled together my own fix, so hopefully this saves others some time.
This worked for me and reduced the load time from circa 4 minutes - even just opening a blank accdb fle - to seconds... So 4 mins if double-clicking an accdb. Once MS Access open and using File | Open it was fast.
I had two instances of MS Access both on Windows Servers that can see the Internet but goes through a corporate proxy etc.
After getting some hints by Googling this issue I suspected that the 4 mins or so was some sort of timeout trying to access a site or sites (MS Office apps do this) and that eventually when the proxy returned a timeout then Access started responding again. It was quick on the 2nd open because it didn't redo this request.
Based on this, I tried to divert certain sites to 127.0.0.1 and turn off all the Internet options in Trust Centre | Privacy etc. Nothing worked.
Finally, I got the solution. In Windows Defender firewall I created a new Application rule for the MSACCESS.EXE. This was an outbound rule that blocked all Internet traffic. After this the first double-click was fast again. I assume with traffic totally blocked, whatever request is going out to sites, is immediately stopped and returns a "no internet" to Access, which then carries out executing, rather than waiting for the 3-4min timeout.
I have a background service for getting the gps coordinates, from 2 seconds to 2 seconds, this works until I've tryed on Android 8.0 (Oreo). I have research for information on how to do this and I found a lot of people saying to use JobScheduler. But in this situation that I need the service too being executed from 2 seconds in 2 seconds, and long running(until user log out), I have read that the Job scheduler is not the best option.
So, in resume, has anyone got a way/clue of how I can do this to work in Android 8?
Thanks any help.
I have just noticed that my C drive is getting full, whereas it still had 30 GB free space 3 days ago.
Given last days activity I can't find any reason for this.
Now I realize that my C free space is getting lower and lower even though there's no current activity on my PC (except that it's turned on).
Every 2 minutes, I lose approximately 100 MB of free space, even though I don't download anything.
I launched my antivirus and I have closed my internet connection in order to see if the free space would stop decreasing, but it continued decreasing at the same pace.
I checked the task manager and notice there was a software running which I think was named "One Drive setup.exe" (during the past weeks, I had many pop up windows saying I had to update onedrive, but there was a problem with the auto update etc... but I didn't car because I don't even know what OneDrive is and I don't think I use it). So I killed this running task.
I thought it had stopped the loss of free space (I even gained 100 MB), but the decrease started again.
Now I connected to Internet again.
I got 300 MB free space back and now it seems constant since 4 minutes. Maybe these little ups and downs can be due to the current antivirus scanning.
But what can explain the loss of 30 GB during the past 2 or 3 days?
Could it be windows update? How can i check this with windows 10?
Could it be a virus or something bad?
Please, answer quickly, i only have 17GB left :-(
Thanks
Which version of Windows OS are you using?
Turn off/ disable System Restore point, this way you will able to recover some space. Other than use CCleaner (https://www.piriform.com/ccleaner/download) to clean your system.
They release patch I believe. But u also can use built in disk cleanup tool(https://support.microsoft.com/en-us/help/4026616/windows-disk-cleanup-in-windows-10).
Also uninstalled OneDrive/Google Drive unless u actively use this service. OneDrive sync with cloud files so that u can use those off line.
I use gnome shell in Fedora 18 x86_64 on an emachines E725 notebook. For the last month, every 60 seconds the display locks up for 25 seconds. Sometimes it does this for 10 minutes, and sometimes all day. The mouse cursor still moves, and sound still plays without skipping. Also, progress bars jump forward when it unfreezes as they never froze. I have stopped all cron tasks and restarted many times. The exact second the clock stops on varies each time I restart the system. I have also noticed a small increase in network use right before it freezes. It sometimes starts freezing before I open any apps, and it still freezes after I close all apps. Please let me know if there is any additional information I should post. I have done many convoluted google and stackoverflow searches over a long period of time and have found no similar problems posted. Thank you for any help or advice.
Probably off topic, but I'd suggest trying a CD/USB linux distribution (i.e. one that runs off the CD rather than having to install it).
If that has problems, you are probably looking at a hardware issue.
If a CD distribution works, then yep, it's something wrong with your installation.