Using parallel controller with high concurrency - jmeter

When I use the parallel controller to test 20K concurrency, the CPU usage of the stress tester is close to 100%, and the number of threads cannot reach the set value. Is there any way to reduce the resource usage of the parallel controller?
Ps:10 8Core 16G Agent used (2K Threads / per) , 1 Controller

I don't think that kicking off 20k threads is a valid use case for the parallel controller.
Whatever. Parallel Controller just bypasses JMeter's limitation regarding inability to kick off extra threads i.e. for simulating AJAX requests. So parallel controller doesn't have "resources", it uses JMeter's resources pool.
So just make sure to follow JMeter Best Practices and it's maximum you can do about it.
If you still cannot conduct the required load using one machine you will have to calculate how many machines of similar hardware specifications you need and go for Distributed testing

Related

How to increase the tps(transaction per second) in jmeter

I have to achieve tps of around 2000 in jmeter but able to get around 1000 tried following things -
-Increasing the config
-Distributed Load Testing
-Increasing heap memory
-Increasing or keeping the threads as per the standard formula(followed jmeter best practices)
is there any other way I can do this?
Normally in order to get more throughput you need to add more threads (virtual users) in the Thread Group
If you cannot add more threads due to lack of resources (CPU, RAM, etc.) - consider switching to Distributed Testing
Of course the system under test must be able to respond fast enough because if the application you're testing isn't capable of serving more than 1000 requests per second - you won't be able to get more unless you identify and fix the bottleneck

Optimal way to handle loads upto 50K TPS using JMeter

can JMeter distributed test handle such loads? or should we fire individual tests on each server and use a backend listener to store the details.
If both of them are not the optimal way, what is the best way to build load test infrastructure to handle big loads?
There are no limitations for the throughput (number of requests per second) on JMeter side, the question whether you can conduct the required load or no mainly depends on the hardware you can allocate.
Given you have powerful enough machine and follow JMeter Best Practices you can even create such a load using single instance, however it's a good idea to check resources usage like CPU, RAM, Network and Disk IO, etc. using i.e. JMeter PerfMon Plugin. The idea is that JMeter must have enough headroom to operate as if it will not be able to send requests fast enough due to i.e. high CPU usage the perceived load will be less even if the system under test can handle more and you will get false negative results.
The answer to the question whether you need to use the Backend Listener mainly depends on the following criteria:
do you need the possibility to observe the test results in the real time while the test is running
do you need to store the results in some database instead of the .jtl results files

How many threads are supported by JMeter for (1 Core 2GB RAM)?

I am currently using JMeter command line to trigger load test under master(2GB Memory & 1 Core) and slave machine(2GB Memory & 1 Core)
How many threads are supported by JMeter for above configuration.
Do we need to change any thing in Heapsize to get maximum threads?
Can any one help in this regard.
We don't know, it might be the case even 1 thread is not supported, it might be the case 2147483647 users are supported.
The number of virtual users you can simulate varies and depends on different factors like:
The nature of the test (what protocols are in scope, what exactly the test is doing, etc.) For simple GET request with small response you will be able to simulate more users, for complex POST request with a lot of calculated encrypted parameters uploading several large files the number of users will be much less
The size of request and response
The number of pre/post processors, assertions, etc.
So the only way of telling how many users you can simulate to measure it
Make sure to have monitoring of essential OS health metrics like CPU, RAM, etc. usage is in place. If you don't have any solutions in mind you can consider using JMeter PerfMon Plugin
Make sure to follow JMeter Best Practices
Start with 1 user and gradually increase the load at the same time looking at the CPU, RAM, Network, disk usage, etc.
When any of monitored metrics starts exceeding, say, 80% of maximum available capacity take a look at how many threads are online just before this moment using i.e. Active Threads Over Time listener
This is how many users you can simulate for particular this test on particular this hardware/software combination

How to load test 10k requests per second using jmeter?

I need to load test my website with 10k req/sec for 1 hour using JMeter. I am confused with the values of loop count, number of thread, ramp-up period and duration.
Also will my laptop (i5 8GB) be able to do that? If not what is the alternative.
PS: I checked every question/answer on stackoverflow for this but I couldn't find any help. Please dont mark it repeated question.
You can use "Constant Throughput Timer" and define target throughput and select throughput based on "all active threads".
Define maximum number of users count in your script so that it will be enough for 10K req/sec.
Also if you are using windows machine then I think you will face this issue "https://www.baselogic.com/2011/11/23/solved-java-net-bindexception-address-use-connect-issue-windows/"
I will recommend to use distributed testing or use more than 1 machine.
The easiest way of configuring JMeter to send X requests per second is using either Precise Troughput Timer or Throughput Shaping Timer in combination with the Concurrency Thread Group. The number of threads needs to be sufficient, the exact number mainly depends on your application response time, if response time is 1 second - you will need 10k threads, if it's 500ms - you will need 5k threads, if it is 2 seconds - you will need 20k threads, etc.
Only you can answer whether your laptop can kick off the required number of virtual users as there are too many factors to consider: nature of the test, the size of the requests/responses, number of pre/post processors and assertions, etc. Make sure to follow JMeter Best Practices and monitor CPU, RAM, Network, etc. usage using i.e. JMeter PerfMon Plugin as if your laptop will be overloaded - JMeter won't be able to send requests fast enough and you will not be able to conduct 10k requests per second even if the server supports it. If your laptop hardware specifications are too low for the test scenario - you will have to go for Distributed Testing
You have a number of issues in play
test design. Use more than one load generator. In fact, use no fewer than three, evenly matched in hardware. Take one and load only one user of each type. This is your control set. If this set degrades at the same rate as your other load generators then you have a common issue, likely the site. If the control set does not degrade, but the other load generators do, then you likely have an overloaded generator. On the commercial test tool side of the fence, generating all load from one host have never been considered a good practice in performance testing.
10K requests per second. This is substantial. I have worked on some top 20 eCommerce sites and I can tell you that even they do not receive this type of traffic to the origin servers. Why? Cache! Either this his a Content Delivery Network where the load is spread across the county, OR there is a cache node directly in front of the load balancer(S) for the site (thing varnishcache of equivalent), OR both for a multi-staged cache. You might want to look for an objective reference in production to pin this to as a validation poinnt, if and only if (IFF) your goal is to represent end user behavior. Running a count of requests grouped by second from the HTTP access logs should be able to validate this number. Also, check the cache plan for fixed assets - it could be poorly managed and load would drop significantly just by better managing the sites cache settings to the client. If your goal is simply to saturate a SOAP/REST interface to the point of destruction then you might have a better path.
If you are looking to take a particular SOAP or REST set of remote procedure calls to the point of destruction, consider a classical stress test. Start your test at zero load, increase with the smallest step interval possible over the longest possible period of time. The physical analogy to this would be the classical hospital style stress test where a nurse comes around every minute and increases the speed OR the incline on the treadmill OR both until some end of test condition is achieved. For a hospital style test that is moving into Oxygen debt, an inability to keep pace, etc... For your application/interface it could be the doubling of response times from what is acceptable, a saturation of resources in the finite resource pool (CPU, DISK, MEMORY, NETWORK) on the back end hosts, etc...

JMeter fails on long scenario

I have a scenario with 5K HTTP requests. When I start JMeter with it, JMeter simply hangs after about 170 users. I followed all the guidelines for successful stress testing (no listeners, headless, increased heap space).
I must say that some of those requests are a little big, the overall file is ~115M.
When I only take a subset of the requests (~100), the simulation works better (faster initialization of users, holds more than 170 users, etc).
My question is, first, as I understand JMeter loads the scenario tree and every threads plays it, there should not be any duplication, so what exactly causes this extensive load? and second, what can I do about it?
PS: when I view the system bottlenecks I notice both CPU and memory are at very high values on the long file, both of the metrics have low values on the shorter version. Anyone can explain?
PS2: the requests have about 7 seconds of delay between them
First I need to let you know that if you are using a single system to do the load testing, the maximum your hardware or the port can handle at a time is 1 Gig of data. and your firewall(if any) would again receive/pass not more than I Gig of data. Try doing the same load test with Distributed System of load testing in Jmeter(Master-Slave-Distributed System). Even then, I don't think it would run for 4k requests(if these requests are heavy).
Best possible solution:
Try Distributed system as I mentioned above.
Try running the load test in Non GUI Mode- CLI
Increase the ramp up time as needed.
Increase the Ram of your system and allocate maximum available heap space to jmeter.
Drastic change- Use 1. Blazemeter cloud or 2. Move the complete setup of your load testing to Amazon Server which is more reliable and scalable.

Resources