I practice Kubernetes on my windows machine. I need to create a YAML file to run some objects on Kubernetes but I couldn't able to create YAML file with CLI command on windows. There are alternative ways to make it in brute force such as creating txt and then changing its extension manually but I wonder if there is any way to create a YAML file via cmd similar to Linux (touch yamlfile.yaml)
Thank you in advance.
update: #tquadrat answer helps to create yamlfile successfully but on windows cmd, when you try to edit yamlfile via default notepad, that turns out .txt again instead of .yaml
My palliative solution is to use VScode to create yamlfiles and also using terminal in VScode.
On Linux, touch yamlfile.yaml creates an empty file. If this is your goal, try
echo. > yamlfile.yaml
Related
I have a windows machine with CygWin installed on it. I do not hold any admin privileges, so, forget about changing environment variables which apply to all user and etc...
Scenario:
When I execute CygWin and type the following command to execute Maven, it works perfectly:
/cygdrive/c/maven/apache-maven-3.5.0/bin/mvn
However, when I create the file .profile as below:
alias mvn="cygdrive/c/maven/apache-maven-3.5.0/bin/mvn"
After restarting CygWing and executing the command "mvn", the following message is sent: No such file or directory.
Any suggestions?
Thanks in advance.
For any of you who may have the same problem, the way I solved this was basically adding a "sh" at the beginning of the command:
elias mvn="sh /cygdrive/c/maven/apache-maven-3.5.0/bin/mvn"
Cheers.
I am currently working on a Windows batch file that will allow me to silently install git (the executable for which will be placed in the folder that the .bat file will be running from) in a pre-specified location on the file system.
I've found this article which seems to provide some suitable advice:
https://github.com/msysgit/msysgit/wiki/Silent-or-Unattended-Installation
However, I'm not entirely sure what parameters I would need to mention in my LOADINF file. I would like to pre-define the options that the user would manually select throughout the various stages of installation, so that it can run through from start to finish without prompting anything from the user.
Can anyone help or point me to a place where I can find these parameters and their available values?
Create a file, for eg. my-config.cnf (or my-config.ini) with the following content:
[Setup]
Lang=default
Dir=C:\Program Files (x86)\Git
Group=Git
NoIcons=0
SetupType=default
...
<other options as shown in the msysgit wiki>
Now, in the batch file, when you execute the installation file (say msysgit-install.exe), use /LOADINF as follows:
msysgit-install.exe /SILENT /LOADINF="my-config.cnf"
I am newbie to launch4j.I want to create exe file using launch4j.
I have followed this link for lauch4j tutorial.
Now,i want to create exe file in command line using launch4j?
I have tried following command but its not working.
>launch4j.exe sample.jar
To run it in console mode you need to use launch4jc.exe (not launch4j.exe) and feed config.xml to it as a parameter.
Docs:
To wrap a jar in console mode use launch4jc.exe and specify the configuration file.
I am having strange problem. I used to run appcfg.py to update my app to appengine but now its not working anymore. When I run this command
C:\Program Files <x86>\Google\google_appengine>appcfg.py update E:\path\myApp\
Its not giving me anything, no error no feedback. Its just back to this line
C:\Program Files <x86>\Google\google_appengine>
Any idea about this issue!
P.S. I'm using Python 2.7. My code is updating through google app launcher but I need to run it from cmd prompt as I will be downloading/uploading appengine stuff which launcher doesn't allow me to do!
Thanks
I still had a little trouble with the instructions. Here's the steps I used to create a batch file to use the Google App Engine download_app with Windows 7.
In my example,
I'll use drive, C:
Default python path will be, C:\Python27\python.exe
GAE path (include "), "C:\Program Files (x86)\Google\google_appengine\appcfg.py"
App ID {your_app_id} will be just your app-id name
{your_app_version} is the "Version:" number in your GAE app.yaml file
I'll create a folder on my Windows 7 desktop and call it GAE_App
The desktop folder path will be C:\Users\{username}\Desktop\GAE_App
{your email} will be the Gmail account connected to your GAE
Right-click on the desktop and select New->Text Document. Open the newly created text document and add the following line of code modified for your setup to the blank text document,
C:\Python27\python.exe "C:\Program Files (x86)\Google\google_appengine\appcfg.py" download_app -A {your_app_id} -V {your_app_version} --email={your email} C:\Users\{username}\Desktop\GAE_App
Save the text document and change the file name to GAE_Download.bat
It's important that the extension now says ".bat" instead of ".txt"
Once finished, click on the batch to execute it. You'll be asked for a password and then the files should download into the GAE_App folder on your desktop. Now, whenever you need to download your files, just click on the batch file.
Not sure why Google didn't simply include this feature with their GAE for Windows software.
I faced the same issue. Here is a simple solution.
Just do this following Steps:
Go to program file where google app engine is installed. Generally It is named as Google.
click on appcfg.py and select open with.. Select "Choose Default Programs".
Select Python from programs and select "Always Use the selected program to open this kind of file" .
Now run the command you should get the results on command line.
For reference click here
Fixed by accessing python lib like that
C:\Python27>python appcfg.py update E:\path\myApp\
Here's a solution that worked for me:
"google_appengine/appcfg.py" update "C:\PATH TO APP
The appcfg.bat that should be used is located **C:\Program Files\Google\Cloud SDK\google-cloud-sdk\platform\appengine-java-sdk\bin** and not the empty appcfg.bat that for some unknown reason also was here C:\Program Files\Google\Cloud SDK\
Good practice is to add this path to the system variable PATH
This worked for me
Basis
<PATH_TO_PYTHON>python <PATH_TO_APPCFG.PY>appcfg.py -A <PROJECT_INSTANCE_NAME> update app.yaml
Example
X:\Software\Python2.7\python Q:\SOFTWARE\GoogleAppEngineSDK\appcfg.py -A great-1337 update app.yaml
I have an old setup of the old program written on c++ which contains multiple installation files files.
_SETUP.1
_SETUP.DLL
_INST32I.EX_
_ISDEL.EXE
SETUP.EXE
DISK1.ID
SETUP.INI
SETUP.INS
_SETUP.LIB
SETUP.PKG
I want to combine all that in to single executable file and i want to execute SETUP.EXE when user would run that single executable. Is it possible to achieve somehow?
The easiest way is simple create archive and say to user to to unpack that and to run SETUP.EXE but i am just wondering may be i can create setup like i describe above.
IExpress.exe is ideal for your job. Google for samples. It is included in your Windows installation. Just open a Command Prompt and type iexpress.exe - this starts a wizard that helps you getting started.