I installed ns3.30 successfully later and ran example simulation files .
But I have a specific error for every file even example files most recently.
error reporting point to a file example naming wave-simple-80211.cc , even if I run another files.
Related
I am running Rscripts on a self hosted Devops agent. My Windows agent is able to access the system's directory where its hosted. Below is the directory structure for my code
Agent loc. : F:/agent
Source Code : F:/agent/deployment/projects/project1/sourcecode
DWH _dump : F:/agent/deployment/DWH_dump/2021/
Output loca. : F:/agent/deployment/projects/project1/output_data/2021
The agent is using CMD in the devops pipeline to trigger R from the system and use the libraries from the system directory.
Problem statement: I am unable to save the output from my Rscript in to the Output Loca. directory. It give an error as Probable reason: permission denied error by pointing to that directory.
Output File Format: file_name.rds but same issue happens even for a csv file.
Command leading to failure: saverds(paste0(Output loca.,"/",file_name.rds))
Workaround : However I found a workaround, tried to save the scripts at the Source Code directory and then save the same files at the Output Loca. directory. This works perfectly fine but costs me 2 extra hours of run time because I have to save all intermediatory files and delete them in the end. Keeping the intermediatory files in memory eats up my RAM.
I have not opened that directory anywhere in the machine. Only open application in my explorer is my browser where the pipeline is running. I spent hours to figure out the reason but no success. Even I checked the system Path to see whether I have mentioned that directory over there and its not present.
When I run the same script directly, on the machine using Rstudio, I do not have any issues with saving the file at any directory.
Spent 2 full days already. Any pointers to figure out the root cause can save me few hours of runtime.
Solution was to set the Azure Pipeline Agent services in Windows to run with Admin Credentials. The agent was not configured as an admin during creation and so after enabling it with my userid which has admin access on the VM, the pipelines were able to save files without any troubles.
Feels great, saved few hours of run time!
I was able to achieve this by following this post.
I have downloaded two zip files of Oracle 12 C.
I have extracted and trying installing it on Windows 10 64 Bit.
winx64_12102_database_1of2
winx64_12102_database_2of2
Setup is available in folder one running the same from there.
Every time I am getting below error
The solution to this Error is simply when you are unzipping the folders unzip at one common folder as i have done
You will find components folders as shown below
D:\softwares\12coracle\winx64_12102_database_1of2\database\Components
D:\softwares\12coracle\winx64_12102_database_2of2\database\stage\Components
Please try to read the log details as shown in screenshot above,its showing the path where installation log are being created. The location was C:\Program Files\Oracle\Inventory\logs \installActions2016-01-26_01-50-16AM.
After going through the logs i found that,In my case it was not able to find the files at below path during the installation
D:\softwares\12coracle\winx64_12102_database_1of2\database\stage\Components\oracle.rdbms\12.1.0.2.0\1\DataFiles
Because there was other unzipped part as shown below and it was unable to get the files at abovepath Hence i copied all the file from below path to the above path location
D:\softwares\12coracle\winx64_12102_database_2of2\database\stage\Components\oracle.rdbms\12.1.0.2.0\1\DataFiles
I ran the whole installation again and folks it completed in overall 55 mins the overall installation with the plugable and container database configuration itself.
Follow the below steps:
Abort the current installer.
Navigate to second folder /database/stage/Components/ and copy all the files.
Paste all the files in first folder location /database/stage/Components/
Finally , run the setup.exe as administrator
I want to run a batch file – say driver.bat – after the application installation is completed. This has to be done using the Visual Studio setup and deployment while creating package. This question has been asked before, but the solution is giving me a problem: once the installation is done, it’s throwing an error message like:
'cmd.exe' should be excluded because its source file is under Windows File Protection
This issue comes when the file is marked as a protected file on the Windows operating system. You need to exclude the file from this protection to execute successfully. The following link would help you do so -
http://msdn.microsoft.com/en-us/library/x97ae5d9(v=vs.80).aspx
I've started using Doxygen to document my team's project source code (we have C#, Objective-C, and Android/Java projects). I wrote up a Windows batch script which checks out the latest trunk versions of each project and uses the command-line Doxygen to generate HTML documentation sites and publish to a directory on the local file system which IIS 7 already hosts. This batch script works perfectly and does everything it needs to, though it takes 10 - 20 minutes to run completely.
Now I'm trying to automate the process so that it will run at the end of every day. I added a scheduled task which simply runs the batch script. Every part of the script seems to work except for the Doxygen part. I can log into the machine and watch the file system and see that working copies are being checked out with no problem and the cleanup stuff works. However it never generates the Doxygen HTML output. The output/target directories Doxygen is configured to use will stay empty every time. I'm finding no error messages of any kind (in Scheduled Tasks and eventvwr). It doesn't work whether I let the task scheduler start it on its own or I tell it to run the task now. As said earlier, I can double-click the batch file and run it normally and everything works fine that way.
The process is done on our development server, it's an older Dell workstation running Windows Vista Business 32-bit. I have the scheduled task running on the "System" account though I have also tried "Local Service" and my own Active Directory domain account (which is an administrator on this server) and it still doesn't work.
Has anyone else successfully used the task scheduler to automate Doxygen? I have no idea what I'm doing wrong. What should I look for next?
I can post slightly anonymized versions of my batch file and Doxygen config files if necessary.
In your batch file, try adding redirection of the doxygen output to a log file. Then run it through the scheduler and see what output was generated. If doxygen encounters an error when run that way you should see it in the log file.
doxygen doxyfile > doxygen.log 2>&1
Also make sure that your bat file runs correctly, even if invoked from another directory than the one where the doxygen stuff resides. When run through the task scheduler, I think that the current directory will be c:\windows\system32, so try this:
c:\windows\system32>c:\path\to\batchfile\mybatch.bat
If that gives path errors you have to fix them.
I am trying to use VSDBCMD.exe (Visual Studio 2010 version) to deploy the output of a database project. I am including the /dd:+ switch in my command line. Every time I run the command, I get one message:
TSD00566 Deployment script generated to:
C:\Deploy\SqlServerDB.txt
There are no errors, but the deployment script is not executed and no deployment happens. I do not have the /Quiet switch turned on.
I have tried both specifying all parameters on the command line and using the .deploymentmanifest file. I get the same results either way: a script file is generated, but not executed. No schema changes are deployed.
I do know that my connection string is correct, because the deployment script that is generated is valid (and even references file paths that only exist on the target SQL server).
My current command line (as in, most recent attempt) is
vsdbcmd.exe
/a:Deploy
/cs:"Data Source=[the correct server];Integrated Security=True;Pooling=False;Initial Catalog=[the correct database]"
/Quiet-
/dd:+
/p:TargetDatabase="[the correct database]"
/dsp:Sql
/Model:"C:\[output path]\SqlServerDB.dbschema"
Can you please help me figure out how to troubleshoot this command, since I am not getting any error messages or useful output?
When VSDBCMD generates a delta script and detects that there are no changes between the database project and the target database, it does not execute the deployment step.
However, it also does not display any message indicating why it id not deploy. So, there were no errors (ergo no error messages) but it did not deploy because the source scripts were identical to the destination database after the first time we ran the command.
It would be nice to have some kind of message indicating "no changes to deploy," but at least I know now that it is working as designed, and that there was no deployment necessary.