I have an executable that I would like to set to run as a service. Using the sc.exe tool provided by windows (see KB article here: http://support.microsoft.com/kb/251192), I successfully "registered" the service. However, when I go to the Service Management Console (Start->Run->services.msc) and start the service, I get the following error:
Error 1053: The service did not respond to the start or control request in a timely fashion.
After reading around my initial impression is that service executables have to conform to an API, and that among the required functions/methods a service has to respond to are a start/stop/restart command. However, this seems to defeat the whole point of the sc.exe tool which is advertised with the ability to turn any executable into a service.
Can anyone shed some light on this for me?
This is the code you are looking for:
sc create SERVICENAME binPath= "cmd /c c:\programlocation\program.exe"
It will not rid you of error 1053, but at least this will apply to the console (CMD) who already did the job of running the app in the background (check task manager to confirm).
Take a look at Topshelf-project which turns many arbitrary executables into services.
When you reference Topshelf, you can run your exe from a command-line, or install it into Windows Services with:
your.exe install
Even with topshelf registered, you would still want to have a logging facility -- such as log4net -- to monitor bootstrapping activities that could prevent it from launching in a timely fashion.
One very likely cause of this behavior is the application that is started is displaying a request for interaction with the end user (messagebox, input prompt, licensing dialog, etc). We have run into this more than once. This usually happens with applications that aren't designed to run as services. You could try running the service as Local System and check the Allow service to interact with desktop checkbox.
The other possibility is that the user the service is configured to run as doesn't have access to resources (disks, databases, etc). If the process works correctly interactively, then try changing the service's user credentials to your user and see if that gets you any further.
Update
Apologies, I assumed the question was regarding srvany which is the application you are looking for.
I have a C++ Windows application that was designed to be a Windows service. It executes an updater periodically to see if there's a new version. To execute the updater, _execv() is used. The updater looks for new versions, downloads them and stops the Windows service (all of these actions are logged), replaces the files, and starts the service again. Doing that in CLI mode (not going into service mode) works fine that way. According to my log files, the child process is launched, but the parent process (the Windows service) exits.
Is it even "allowed" to launch child processes in Windows services, and, why does the service exit unexpected then? My log files show no error (I am even monitoring for segfaults etc which is written to the log).
Why are you using _execv() rather than doing it the windows way and using CreateProcess()?
I assume you've put some debug into your service and you aren't getting past the point where you call _execv() in your service?
_execv replaces the existing process with a new one running the file you pass as the parameter. Under Unix (and similar) that's handled directly/natively. Windows, however, doesn't support that directly -- so it's done by having the parent process exit and arrange for a child process to be started as soon as it does.
IOW, it sounds like _execv is doing exactly what it's designed to -- but in this case, it's probably not what you really want. You can spawn a process from a service, but you generally want to use CreateProcessAsUser to create it under a specified account instead of the service account (which has a rather unusual set of rights assigned to it). The service process will then exit and restart when it's asked to by the service manager when your updater calls ControlService, CreateService, etc.
I have recently inherited a couple of applications that run as windows services, and I am having problems providing a gui (accessible from a context menu in system tray) with both of them.
The reason why we need a gui for a windows service is in order to be able to re-configure the behaviour of the windows service(s) without resorting to stopping/re-starting.
My code works fine in debug mode, and I get the context menu come up, and everything behaves correctly etc.
When I install the service via "installutil" using a named account (i.e., not Local System Account), the service runs fine, but doesn't display the icon in the system tray (I know this is normal behavior because I don't have the "interact with desktop" option).
Here is the problem though - when I choose the "LocalSystemAccount" option, and check the "interact with desktop" option, the service takes AGES to start up for no obvious reason, and I just keep getting
Could not start the ... service on Local Computer.
Error 1053: the service did not respond to the start or control request in a timely fashion.
Incidentally, I increased the windows service timeout from the default 30 seconds to 2 minutes via a registry hack (see http://support.microsoft.com/kb/824344, search for TimeoutPeriod in section 3), however the service start up still times out.
My first question is - why might the "Local System Account" login takes SOOOOO MUCH LONGER than when the service logs in with the non-LocalSystemAccount, causing the windows service time-out? what's could the difference be between these two to cause such different behavior at start up?
Secondly - taking a step back, all I'm trying to achieve, is simply a windows service that provides a gui for configuration - I'd be quite happy to run using the non-Local System Account (with named user/pwd), if I could get the service to interact with the desktop (that is, have a context menu available from the system tray). Is this possible, and if so how?
Any pointers to the above questions would be appreciated!
After fighting this message for days, a friend told me that you MUST use the Release build. When I InstallUtil the Debug build, it gives this message. The Release build Starts fine.
If you continue down the road of trying to make your service interact with the user's desktop directly, you'll lose: even under the best of circumstances (i.e. "before Vista"), this is extremely tricky.
Windows internally manages several window stations, each with their own desktop. The window station assigned to services running under a given account is completely different from the window station of the logged-on interactive user. Cross-window station access has always been frowned upon, as it's a security risk, but whereas previous Windows versions allowed some exceptions, these have been mostly eliminated in Vista and later operating systems.
The most likely reason your service is hanging on startup, is because it's trying to interact with a nonexistent desktop (or assumes Explorer is running inside the system user session, which also isn't the case), or waiting for input from an invisible desktop.
The only reliable fix for these issues is to eliminate all UI code from your service, and move it to a separate executable that runs inside the interactive user session (the executable can be started using the global Startup group, for example).
Communication between your UI code and your service can be implemented using any RPC mechanism: Named Pipes work particularly well for this purpose. If your communications needs are minimal, using application-defined Service Control Manager commands might also do the trick.
It will take some effort to achieve this separation between UI and service code: however, it's the only way to make things work reliably, and will serve you well in the future.
ADDENDUM, April 2010: Since this question remains pretty popular, here's a way to fix another common scenario that causes "service did not respond..." errors, involving .NET services that don't attempt any funny stuff like interacting with the desktop, but do use Authenticode signed assemblies: disable the verification of the Authenticode signature at load time in order to create Publisher evidence, by adding the following elements to your .exe.config file:
<configuration>
<runtime>
<generatePublisherEvidence enabled="false"/>
</runtime>
</configuration>
Publisher evidence is a little-used Code Access Security (CAS) feature: only in the unlikely event that your service actually relies on the PublisherMembershipCondition will disabling it cause issues. In all other cases, it will make the permanent or intermittent startup failures go away, by no longer requiring the runtime to do expensive certificate checks (including revocation list lookups).
I faced this problem because of a missing framework on the box running my service. The box had .NET 4.0 and the service was written on top of .NET 4.5.
I installed the following download on the box, restarted, and the service started up fine:
http://www.microsoft.com/en-us/download/details.aspx?id=30653
To debug the startup of your service, add the following to the top of the OnStart() method of your service:
while(!System.Diagnostics.Debugger.IsAttached) Thread.Sleep(100);
This will stall the service until you manually attach the Visual Studio Debugger using Debug -> Attach to Process...
Note: In general, if you need a user to interact with your service, it is better to split the GUI components into a separate Windows application that runs when the user logs in. You then use something like named pipes or some other form of IPC to establish communication between the GUI app and your service. This is in fact the only way that this is possible in Windows Vista.
In service class within OnStart method don't do huge operation, OS expect short amount of time to run service, run your method using thread start:
protected override void OnStart(string[] args)
{
Thread t = new Thead(new ThreadStart(MethodName)); // e.g.
t.Start();
}
I'm shooting blind here, but I've very often found that long delays in service startups are directly or indirectly caused by network function timeouts, often when attemting to contact a domain controller when looking up account SIDs - which happens very often indirectly via GetMachineAccountSid() whether you realize it or not, since that function is called by the RPC subsystem.
For an example on how to debug in such situations, see The Case of the Process Startup Delays on Mark Russinovich's blog.
If you are using Debug code as below in your service the problem may arise.
#if(!DEBUG)
ServiceBase[] ServicesToRun;
ServicesToRun = new ServiceBase[]
{
new EmailService()
};
ServiceBase.Run(ServicesToRun);
#else
//direct call function what you need to run
#endif
To fix this, while you build your windows service remove #if condition because it didn't work as it is.
Please use argument for debug mode instead as below.
if (args != null && args.Length > 0)
{
_isDebug = args[0].ToLower().Contains("debug");
}
In my case the problem was missing version of .net framework.
My service used
<startup>
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5" />
</startup>
But .net Framework version of server was 4, so by changing 4.5 to 4 the problem fixed:
<startup>
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0" />
</startup>
Copy the release DLL or get the dll from release mode rather than Debug mode and paste it to installation folder,,it should work
I was running into a similar problem with a Service I was writing. It worked fine then one day I started getting the timeout on Start errors. It happened in one &/or both Release and Debug depending on what was going on. I had instantiated an EventLogger from System.Diagnostics, but whatever error I was seeing must have been happening before the Logger was able to write...
If you are not aware of where to look up the EventLogs, in VS you can go to your machine under the Server Explorer. I started poking around in some of the other EventLogs besides those for my Service. Under Application - .NETRuntime I found the Error logs pertinent to the error on startup. Basically, there were some exceptions in my service's constructor (one turned out to be an exception in the EventLog instance setup - which explained why I could not see any logs in my Service EventLog). On a previous build apparently there had been other errors (which had caused me to make the changes leading to the error in the EventLog set up).
Long story short - the reason for the timeout may be due to various exceptions/errors, but using the Runtime EventLogs may just help you figure out what is going on (especially in the instances where one build works but another doesn't).
Hope this helps!
Install the debug build of the service and attach the debugger to the service to see what's happening.
I want to echo mdb's comments here. Don't go this path. Your service is not supposed to have a UI... "No user interaction" is like the definining feature of a service.
If you need to configure your service, write another application that edits the same configuration that the service reads on startup. But make it a distinct tool -- when you want to start the service, you start the service. When you want to configure it, you run the configuration tool.
Now, if you need realtime monitoring of the service, then that's a little trickier (and certainly something I've wished for with services). Now you're talking about having to use interprocess communications and other headaches.
Worst of all, if you need user interaction, then you have a real disconnect here, because services don't interact with the user.
In your shoes I would step back and ask why does this need to be a service? And why does it need user interaction?
These two requirements are pretty incompatible, and that should raise alarms.
I had this problem and it drove me nuts for two days…
If your problem similar to mine:
I have settings “User settings” in my windows service, so the service can do self-maintenance, without stopping and starting the service. Well, the problem is with the “user settings”, where the config file for these settings is saved in a folder under the user-profile of the user who is running the windows service under the service-exe file version.
This folder for some reason was corrupted. I deleted the folder and service start working back again happily as usual…
I had this problem, it took about a day to fix. For me the problem was that my code skipped the "main content" and effectively ran a couple of lines then finished. And this caused the error for me. It is a C# console application which installs a Windows Service, as soon as it tried to run it with the ServiceController (sc.Run() ) then it would give this error for me.
After I fixed the code to go to the main content, it would run the intended code:
ServiceBase.Run(new ServiceHost());
Then it stopped showing up.
As lots of people have already said, the error could be anything, and the solutions people provide may or may not solve it. If they don't solve it (like the Release instead of Debug, adding generatePublisherEvidence=false into your config, etc), then chances are that the problem is with your own code.
Try and get your code to run without using sc.Run() (i.e. make the code run that sc.Run() would have executed).
This problem usually occurs when there is some reference missing on your assembly and usually the binding fails at the run time.
to debug put Thread.Sleep(1000) in the main(). and put a break point in the next line of execution.
Then start the process and attach the debugger to the process while it is starting. Press f5 after it hit the break point. It will throw the exception of missing assembly or reference.
Hopefully this will resolve this error.
Once try to run your exe file. I had the same problem, but when I ran it direct by double click on the exe file, I got a message about .Net framework version, because I was released the service project with a framework which it wasn't installed on target machine.
Took me hours, should have seen the event viewer get_AppSettings().
A change in the app config, caused the problem.
Adding 127.0.0.1 crl.microsoft.com to the "Hosts" file solved our issue.
My issue was due to target framework mentioned in windows service config was
<startup>
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.6"/>
</startup>
and my server in which I tried to install windows service was not supported for this .Net version.
Changing which , I could able to resolve the issue.
I had a similar issue, steps I followed:
Put a Debugger.Launch() in the windows service constructor
Followed step by step to see where it got stuck
My issue wasn't due to any error.
I had a BlockingCollection.GetConsumingEnumerable() in the way that caused the windows service to wait.
I had this problem too. I made it to work by changing Log On account to Local System Account. In my project I had it setup to run as Local Service account. So when I installed it, by default it was using Local Service. I'm using .net 2.0 and VS 2005. So installing .net 1.1 SP1 wouldn't have helped.
Both Local System Account and Local Service would not work for me, i then set it to Network Service and this worked fine.
In my case, I had this trouble due to a genuine error. Before the service constructor is called, one static constructor of member variable was failing:
private static OracleCommand cmd;
static SchedTasks()
{
try
{
cmd = new OracleCommand("select * from change_notification");
}
catch (Exception e)
{
Log(e.Message);
// "The provider is not compatible with the version of Oracle client"
}
}
By adding try-catch block I found the exception was occuring because of wrong oracle version. Installing correct database solved the problem.
I also faced similar problem and found that there was issue loading assembly. I was receiving this error immediately when trying to start the service.
To quickly debug the issue, try to run service executable via command prompt using ProcDump http://technet.microsoft.com/en-us/sysinternals/dd996900. It shall provide sufficient hint about exact error.
http://bytes.com/topic/net/answers/637227-1053-error-trying-start-my-net-windows-service helped me quite a bit.
This worked for me. Basically make sure the Log on user is set to the right one. However it depends how the account infrastructure is set. In my example it's using AD account user credentials.
In start up menu search box search for 'Services'
-In Services find the required service
-right click on and select the Log On tab
-Select 'This account' and enter the required content/credentials
-Ok it and start the service as usual
In case you have a windows form used for testing, ensure that the startup object is still the service and not the windows form
We have Log4Net configured to log to a database table. The table had grown so large that the service was timing out trying to log messages.
open the services window as administrator,Then try to start the service.That worked for me.
Build project in Release Mode.
Copy all Release folder files to source path.
Execute Window service using command prompt window in administrative access.
Never delete files from source path.
At lease this works for me.
Release build did not work for me, however, I looked through my event viewer and Application log and saw that the Windows Service was throwing a security exception when it was trying to create an event log. I fixed this by adding the event source manually with administration access.
I followed this guide from Microsoft:
open registry editor, run --> regedit
Locate the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application
Right-click the Application subkey, point to New, and then click Key.
Type event source name used in your windows service for the key name.
Close Registry Editor.