I install asammdf package to read dat file in python. After installing asammdf using pip install asammdf, the installation is successful. However, when I import asammdf, I got ldf is not supported.
May I know how to solve this issue and after installing the asammdf? Moreover I also cannot open the spyder in my anaconda
That is just a warning message from the canmatrix library. If you don't use LIN database file (ldf files) for bus logging decoding then you can just ignore it.
If you really want to make it go away then just install the ldfparser package since this is required for ldf support ( see
https://github.com/ebroecker/canmatrix/blob/6ed291b73a5824e367615c99ee1b4e6084eb026e/setup.py#L98)
Related
So I'm trying to install yasm on Windows 11 with Chocolatey, but an error occurs, does anyone know how to solve this error?
PS C:\WINDOWS\system32> choco install yasm
Chocolatey v1.2.0
Installing the following packages:
yasm
By installing, you accept licenses for the packages.
Progress: Downloading yasm 1.2.0... 100%
yasm v1.2.0
yasm package files install completed. Performing other installation steps.
The package yasm wants to run 'chocolateyInstall.ps1'.
Note: If you don't run this script, the installation will fail.
Note: To confirm automatically next time, use '-y' or consider:
choco feature enable -n allowGlobalConfirmation
Do you want to run the script?([Y]es/[A]ll - yes to all/[N]o/[P]rint): Y
WARNING: Url has SSL/TLS available, switching to HTTPS for download
Downloading yasm 64 bit
from 'https://www.tortall.net/projects/yasm/releases/yasm-1.2.0-win64.exe'
Progress: 100% - Completed download of C:\ProgramData\chocolatey\lib\yasm\tools\yasm.exe (779.5 KB).
Download of yasm.exe (779.5 KB) completed.
C:\ProgramData\chocolatey\lib\yasm\tools\yasm.exe
ERROR: The term 'Write-ChocolateyFailure' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
The install of yasm was NOT successful.
Error while running 'C:\ProgramData\chocolatey\lib\yasm\tools\chocolateyInstall.ps1'.
See log for details.
Chocolatey installed 0/1 packages. 1 packages failed.
See the log for details (C:\ProgramData\chocolatey\logs\chocolatey.log).
Failures
- yasm (exited -1) - Error while running 'C:\ProgramData\chocolatey\lib\yasm\tools\chocolateyInstall.ps1'.
See log for details.
I couldn't find a solution on the internet, so I asked here.
The package uses helpers (Write-Chocolatey-Failure) that have been deprecated for some time and subsequently removed. To restore the functionality you can use the chocolatey-compatibility.extension package.
However, two things:
The package is trying to write a failure message, so something is likely broken with the package.
The package was last updated in 2013 so YMMV with the software it's downloading working at all.
This happens because you are trying to install a package that still uses a syntax that is no longer supported in Chocolatey CLI. You have two options to resolve this issue.
The first and best option is to try contacting the package's maintainer and ask them to update the package to follow modern standards of how a package should be written.
The second option that will fix your current issue is to install a compatibility package to reintroduce removed helpers that are no longer supported.
You can install this package by running: choco install chocolatey-compatibility.extension and then try installing the yasm package again.
I'm trying to install the package "Tax4Fun" but keep failing.
I've tried 2 different ways:
install.packages("devtools")
devtools::install_url("http://tax4fun.gobics.de/Tax4Fun/Tax4Fun_0.3.1.tar.gz")
library(Tax4Fun)
The error that I get is:
ERROR: dependency 'biom' is not available for package 'Tax4Fun'
I've also tried installing biom directly
BiocManager::install("biom")
which does not work either
Bioconductor version 3.10 (BiocManager 1.30.10), R 3.6.1 (2019-07-05)
Installing package(s) 'biom'
Installation path not writeable, unable to update packages: boot, foreign, KernSmooth,
mgcv, nlme, survival
Warning message:
package ‘biom’ is not available (for R version 3.6.1)
The other way I've tried to install Tax4Fun directly is
BiocManager::install("Tax4Fun")
I get the following error code:
Bioconductor version 3.10 (BiocManager 1.30.10), R 3.6.1 (2019-07-05)
Installing package(s) 'Tax4Fun'
Installation path not writeable, unable to update packages: boot, foreign, KernSmooth,
mgcv, nlme, survival
Warning message:
package ‘Tax4Fun’ is not available (for R version 3.6.1)
Please help :)
You need to install it by downloading the packages from source (http://tax4fun.gobics.de). Then it depends whether you are running on Linux/Mac or Windows.
From the command line, you navigate to the folder containing the .tar.gz downloaded package. Then you should install it using:
R CMD INSTALL Tax4Fun_0.3.1.tar.gz
But dependancies are not installed by default. So you need to install dependancies manually, Qiimer and Biom, which are both deprecated on Cran. You install them using the same command, after you have downloaded the packages from the Cran archives.
Before that, you need to also install their dependancies in R:
install.packages("pheatmap")
install.packages("RJSONIO")
Then you should be able to proceed as mentioned above: install Qiimer and Biom from the command line first. Then Tax4Fun from the command line too.
If you are running on Windows you should have quite the same issues, but the installation of the different packages and dependancies is different. You can have a look at the readme at http://tax4fun.gobics.de
[Hello, I have a question that i cannot install the package for OCTAVE by the package from here : https://sourceforge.net/projects/octave/?source=typ_redirect
My system is windows. please help me.
pkg install nan-3.1.4.tar.gz
ls: /usr/local/: No such file or directory
][1]
You should install from https://www.gnu.org/software/octave/#install using the installer. It includes many octave-forge packages (including nan) so the only thing you need is to pkg load io
I have installed NLTK. Here's an image of the installation log.
When i use import nltk i get an error:
"No module named NLTK.corpus"
Here is a screenshot.
What could be the cause?
I think I had the same problem. So, downloading all the packages at once (since question didn't specify).
Start python and then import the packages, exit python and upgrade nltk. Modify the 'all' to download a specific corpus. Took me awhile to complete the 'all' download, I separately downloaded framenet_v15 and restarted the 'all' after. Upgrade nltk when the download is complete.
$ python
>>>import nltk
>>>nltk.download('all')
exit python
$ pip install --upgrade nltk
To fix this, you should rename your file to something else, say nltkXXX.py. Also make sure to remove "nltk.pyc" from your directory if it exists, since this will also be loaded (it's the byte compiled version of your code). After that, it should work fine.
If you are using the latest version of python, then try installing nltk using pip and the wheel downloaded from here:
http://www.lfd.uci.edu/~gohlke/pythonlibs/
Then in command prompt, use the command:
pip3 install
This should install nltk correctly.
After that check the installation in python using the command:
import nltk
and download the nltk data required using:
nltk.download()
If you find (Import NLTK : no module NLTK corpus) that type of error .
Make sure your saved file not be the name like (nltk.py).
so just rename your file name (like rename nltk.py to example.py ) or something else:
I hope it will help you.
thanks
If you has using PyCharm IDE, you should have install NLTK from the IDE's own tools [File -> Settings -> Projetct Interpreter -> Install (button '+') -> Install Package].
I am trying to install Agave under Fedora, but I got this error:
configure: error: gnome-doc-utils >= 0.3.2 not found
I tried to compile and install the gnome-doc-utils from this page, but i still got this error,and when i try the
yum list installed gnome-doc-utils*
command, I can't find the package. Do I have to register the package after installing? I don't think I have a error for the make install, because I don't see any the text error in the process, or I could be wrong.
In general, package managers (tools like yum) don't know that something has been installed on your machine unless it was installed as a package. If an agave package for Fedora exists, I would suggest using that instead of compiling from source.