I created a fbo with two-color attachments i.e., colorAttachment0 and colorAttachment1.
so my question is I want to draw into single colorattachment in one draw call.
in my shader i tried this but not working:
if(attachmentVal==0) //I am sending the attachmentVal as uniform
{
outColor = vec4(1,0,0,0);
}
if(attachmentVal==1)
{
outColor2 = vec4(1,1,1,0);
}
But it is not working.
so my question is, is it possible to render into a single attachment in a single draw call by controlling the selection of the attachment??
If possible please give me a solution to this problem.
Thank you.
Use glDrawBuffers() to select which attachments are active for the current draw.
Related
In a nutshell, let's say, I need to draw a complex object (arrow) which consists of certain amount of objects, like five (or more) lines, for instance. And what's more important, that object must be transformed with particular (dynamic) coordinates (including scaling, possibly).
My question is whether SkiaSharp has anything which I can use for manipulating of this complex object transformation (some sort of grouping etc.) or do I still need to calculate every single point manually (with matrix, for instance).
This question is related particularly to SkiaSharp as I use it on Xamarin, but maybe some general answers from Skia can also help with it?
I think, the question might be too common (and possibly not for stackoverflow exactly), but I just can't find any specific information in google.
Yes, I know how to use SkiaSharp for drawing primitives.
create an SKPath and add lines and other shapes to it
SKPath path = new SKPath();
path.LineTo(...);
...
...
then draw the SKPath on your canvas
canvas.DrawPath(path,paint);
you can apply a transform to the entire path before drawing
var rot = new SKMatrix();
SKMatrix.RotateDegrees(ref rot, 45.0f);
path.Transform(rot);
If you are drawing something more complex than a path SKPicture is perfect for this. You can set it up so that you construct it once and then reuse it easily and efficiently. In the example below, the SKPicture's origin is in the center of a 100 x 100 rectangle but that is arbitrary.
SKPicture myPicture;
SKPicture MyPicture {
get {
if(myPicture != null) {
return myPicture;
}
using(SKPictureRecorder recorder = new SKPictureRecorder())
using(SKCanvas canvas = recorder.BeginRecording(new SKRect(-50, -50, 50, 50)))
// draw using primitives
...
myPicture = recorder.EndRecording();
}
return myPicture;
}
}
Then you apply your transforms to the canvas, draw the picture and restore the canvas state. offsetX and offsetY correspond to where the origin of the SKPicture will be rendered.
canvas.Save();
canvas.Translate(offsetX, offsetY);
canvas.Scale(scaleAmount);
canvas.RotateDegrees(degrees);
canvas.DrawPicture(MyPicture);
canvas.Restore();
I'm developing a addon library for p5.js and I need to setup several fill/stroke colors in certain functions.
Is there a way to get the current fill/stroke value so I can ensure that when the user calls said functions he doesn't have to worry about the colors that I set?
Something of this sort:
function foo(){
var tempColor = getFill(); //Hypothetical get color function
// ...
fill(color1); //Some color I use
// ...
fill(color2); //Another color I use
// ...
fill(tempColor); //Reset fill color to user set
}
Edit: Although undocumented, I found some references in p5.js to a curFillColor variable but I didn't find a way to use this.
Hey I don't know if its a bit late. I'm also trying to create an addon library for p5. So what I'm doing is I'm calling push just before I'm using the fill and after that call pop. So that I ensure that the fill is restored.
Refer
https://p5js.org/reference/#/p5/push
P5.js is open source, so you can see exactly what they do when you call the fill() function here:
p5.prototype.fill = function() {
this._renderer._setProperty('_fillSet', true);
this._renderer._setProperty('_doFill', true);
this._renderer.fill.apply(this._renderer, arguments);
return this;
};
Which takes you to the renderer-specific fill variable. You can track that down, but basically: there isn't an easy way to get the current fill color.
What you might want to do is to use a buffer in your library. Don't call fill() on the main sketch; call fill() on the buffer. Do all your drawing to the buffer, and then draw that buffer to the sketch.
I have a character made of up child objects that are animated using Unity3D's animation system.
While the player is walking, I can programmatically move the hand object up to catch a ball using the following code.
hand.position.y = ball.transform.position.y;
I need the hand object to go back to following the walk animation after it touches the ball, but instead it just stays at the exact position since it was set.
You want to use inverse kinematics and let Unity do the work of figuring out positioning for you. Here's a quick-and-dirty (untested) example for catching a ball (it's in C#, but it should be pretty similar for UnityScript):
// in a script on the same GameObject as your animation controller
bool isCatching;
Transform ball;
void OnAnimatorIK (int layer) {
if (isCatching) {
// set position and rotation weights for your catching hand
animator.SetIKPosition(AvatarIKGoal.RightHand, ball.position);
animator.SetIKRotation(AvatarIKGoal.RightHand, ball.rotation);
} else {
// return your position and rotation weights back to their defaults (probably 0f?)
}
}
You'll need to do some work (possibly raycasting or just checking distance and direction) to determine when to set the isCatching flag to true, and you'll want to play with the weights for position and rotation to make it look natural. The IK manual entry has more detailed information.
I have an animation with about 20 frames. I need to be able to access local transforms for each bone for a given animation frame. I know how to access the bone and its local transform (a sample of the code)
Transform root, spine1;
getChildFromName(gameObj, "Jnt_Root", out root);
getChildFromName(root, "Jnt_Spine1", out spine1);
spine1.localRotation = someValue;
All of this works fine, but I don't know the values I'm getting are from which animation frame? I assume its from frame 1 (can verify using debugger but that's not the point)
The questions is how to get and set these values for a specific frame? Thanks!
Something like this should work for getting the current transforms:
AnimationState state = animation["your_animation"];
state.enabled = true;
state.normalizedTime = (1.0f/totalAnimationTime) * specificFrame;
animation.Sample();
// get all transforms of this animation, extract your root and spine from here.
Transform[] transforms = animation.gameObject.GetComponentsInChildren<Transform>();
Or if you're trying to sample while the animation is running you could do something like:
if(animation["your_animation"].normalizedTime > 0.3 && animation["your_animation"].normalizedTime < 0.5) {
//... do something at this point in time. You'll have to figure out the frame
//from the time
}
Last I checked you can't explicitly extract a particular frame. But if you know the total length of your animation (time-wise), you can move the animation to that point with something like: (1.0f/totalAnimationTime) * specificFrame; (this assumes the keyframes are uniformly spaced.)
Once stored you should be able to modify the transforms directly but I've never tried.
G'day all,
In short, I'm using a for loop to create a bunch of identical sprites that I want to bounce around the screen. The problem is how do I write a collision detection process for the sprites. I have used the process of placing rectangles around sprites and using the .intersects method for rectangles but in that case I created each sprite separately and could identify each one uniquely. Now I have a bunch of sprites but no apparent way to pick one from another.
In detail, if I create an object called Bouncer.cs and give it the movement instructions in it's update() method then create a bunch of sprites using this in Game.cs:
for (int i = 1; i < 5; ++i)
{
Vector2 position = new Vector2(i * 50, i * 50);
Vector2 direction = new Vector2(i * 10, i * 10);
Vector2 velocity = new Vector2(10);
Components.Add(new Bouncer(this, position, direction, velocity, i));
}
base.Initialize();
I can draw a rectangle around each one using:
foreach (Bouncer component1 in Components)
{
Bouncer thing = (Bouncer)component1;
Rectangle thingRectangle;
thingRectangle = new Rectangle((int)thing.position.X, (int)thing.position.Y, thing.sprite.Width, thing.sprite.Height);
But now, how do I check for a collision? I can hardly use:
if (thingRectangle.Intersects(thingRectangle))
I should point out I'm a teacher by trade and play with coding to keep my brain from turning to mush. Recently I have been working with Python and with Python I could just put all the sprites into a list:
sprites[];
Then I could simply refer to each as sprite[1] or sprite[2] or whatever its index in the list is. Does XNA have something like this?
Please let me know if any more code needs to be posted.
Thanks,
Andrew.
One solution, which I use in my game engine, is to have a Logic code run inside the objects for every game Update, ie. every frame. It seems you already do this, according to the variable names, which indicate you run some physics code in the objects to update their positions.
You might also want to create the collision rectangle inside the Bouncer's constructor so it's more accessible and you make good use of object oriented programming, maybe even make it an accessor, so you can make it update every time you call it instead of manually updating the bounding/collision box. For example:
public Rectangle #BoundingBox {
get { return new Rectangle(_Position.X, _Position.Y, width, height); }
}
Whichever way works, but the collision checks can be run inside the Bouncer object. You can either make the reference list of the Bouncer objects static or pass it to the objects itself. The code for collisions is very simply:
foreach(Bouncer bouncer in Components) //Components can be a static List or you can pass it on in the constructor of the Bouncer object
{
if (bouncer.BoundingBox.Intersects(this.BoundingBox))
{
//they collided
}
}