I get this error when deploying my Heroku application from the CLI. It always worked fine, even today a moment ago. Now I'm getting this:
$ git push heroku main
Enumerating objects: 46, done.
Counting objects: 100% (46/46), done.
Delta compression using up to 8 threads
Compressing objects: 100% (31/31), done.
Writing objects: 100% (31/31), 4.62 KiB | 788.00 KiB/s, done.
Total 31 (delta 23), reused 0 (delta 0), pack-reused 0
remote: Compressing source files... done.
remote: Building source:
remote:
remote: ! Heroku Git error, please try again shortly.
remote: ! See http://status.heroku.com for current Heroku platform status.
remote: ! If the problem persists, please open a ticket
remote: ! on https://help.heroku.com/tickets/new
remote: ! and provide the Request ID dee02a42-c0d2-4740-b9f3-cbfb58c7d95f
remote:
To https://git.heroku.com/vaquita-escolar.git
! [remote rejected] main -> main (pre-receive hook declined)
error: failed to push some refs to 'https://git.heroku.com/vaquita-escolar.git'
Advice is appreciated.
It was a temporary Heroku issue. It works now (today).
Related
well simply this is what i am getting;
sa#sa-VPCW11S1E:/opt/hubot/bin$ heroku buildpacks
=== young-everglades-12415 Buildpack URL
heroku/java
sa#sa-VPCW11S1E:/opt/hubot/bin$ sudo git push heroku master
Counting objects: 3, done.
Delta compression using up to 2 threads.
Compressing objects: 100% (2/2), done.
Writing objects: 100% (3/3), 2.14 KiB | 0 bytes/s, done.
Total 3 (delta 0), reused 0 (delta 0)
remote: Compressing source files... done.
remote: Building source:
remote:
remote: -----> Failed to detect set buildpack https://codon- buildpacks.s3.amazonaws.com/buildpacks/heroku/java.tgz
remote: More info: https://devcenter.heroku.com/articles/buildpacks#detection-failure
remote:
remote: ! Push failed
remote: Verifying deploy...
remote:
remote: ! Push rejected to young-everglades-12415.
remote:
To https://git.heroku.com/young-everglades-12415.git
! [remote rejected] master -> master (pre-receive hook declined)
error: failed to push some refs to 'https://git.heroku.com/young- everglades-12415.git'
sa#sa-VPCW11S1E:/opt/hubot/bin$
although i did set a buildpack on the app git push failed because no buildpack detected ?
How can i resolve this, and is it actually the right steps towards deploying hubot ?
The heroku build packs still use the detection script to identify the language in use. Since Hubot is not a java project and it looks like you are using the java build pack, I suspect the detection script failed.
To fix this, try removing the buildpack.
% heroku buildpacks:remove heroku/java
After this I would try,
% git push heroku master
(Optional) I believe the rediscloud addon is needed for some scripts. You can add it with,
% heroku addons:create rediscloud
Then watch the logs heroku logs and see what happens.
There is a good deployment guide in hubot/deploying/heroku.md
When I try to update my Java app on Heroku it fails with a "Argument list too long - bin/receive_untrusted". This happens before the actual build process starts and it's the only error that I'm getting. Of course it build perfect locally..
Counting objects: 95506, done.
Delta compression using up to 8 threads.
Compressing objects: 100% (28630/28630), done.
Writing objects: 100% (95506/95506), 16.95 MiB | 2.82 MiB/s, done.
Total 95506 (delta 42943), reused 94815 (delta 42643)
remote: Compressing source files... done.
remote: Building source:
remote:
remote: Build stream timed out, reverting to polling...
remote:
remote: Build output:
remote: Argument list too long - bin/receive_untrusted
remote: ! Push rejected to xxxxx.
remote:
To https://git.heroku.com/xxxx.git
! [remote rejected] develop -> master (pre-receive hook declined)
error: failed to push some refs to 'https://git.heroku.com/xxxxx.git'
The only thing that fixed it for me was resetting the Git repo in Heroku and pushing it from scratch, a described in this answer.
Trying to push play2-yeoman to heroku.
As discussed here , I did the following
heroku create --buildpack https://github.com/47deg/heroku-buildpack-scala.git
I see the following
Creating frozen-springs-5883... done, stack is cedar
BUILDPACK_URL=https://github.com/47deg/heroku-buildpack-scala.git
http://frozen-springs-5883.herokuapp.com/ | git#heroku.com:frozen-springs-5883.git
I looked at the forked buildpack, it uses a variable called ${UI_FILES} , so I added that to heroku config using
heroku config:set UI_FILES=ui
However when I try to push I get the following error message
Initializing repository, done.
Counting objects: 889, done.
Delta compression using up to 4 threads.
Compressing objects: 100% (367/367), done.
Writing objects: 100% (889/889), 1.24 MiB | 2.17 MiB/s, done.
Total 889 (delta 312), reused 845 (delta 294)
-----> Fetching custom git buildpack... done
! Push rejected, no Cedar-supported app detected
To git#heroku.com:frozen-springs-5883.git
! [remote rejected] master -> master (pre-receive hook declined)
error: failed to push some refs to 'git#heroku.com:frozen-springs-5883.git'
According to Heroku's devcenter, you can force heroku to build using the Play 2 buildpack by executing the following command:
heroku config:add BUILDPACK_URL=https://github.com/heroku/heroku-buildpack-scala.git
I'm not able to deploy a Play 2.2.1 app to heroku. Here is what I see:
Delta compression using up to 4 threads.
Compressing objects: 100% (1056/1056), done.
Writing objects: 100% (1163/1163), 271.55 KiB | 136 KiB/s, done.
Total 1163 (delta 565), reused 0 (delta 0)
-----> Removing .DS_Store files
-----> Fetching custom git buildpack... done
! Push rejected, no Cedar-supported app detected
To git#heroku.com:pacific-chamber-5618.git
! [remote rejected] master -> master (pre-receive hook declined)
error: failed to push some refs to 'git#heroku.com:pacific-chamber-5618.git
Any reasons as to why this should fail?
I'm encountering a problem deploying heroku. The online instructions suggest I follow these steps: https://devcenter.heroku.com/articles/django#deploy-to-heroku
However, when I get to "git push heroku master" I get the following error:
Counting objects: 12, done.
Delta compression using up to 8 threads.
Compressing objects: 100% (10/10), done.
Writing objects: 100% (12/12), 3.44 KiB, done.
Total 12 (delta 1), reused 0 (delta 0)
! Heroku push rejected, no Cedar-supported app detected
To git#heroku.com:mysterious-peak-4781.git
! [remote rejected] master -> master (pre-receive hook declined)
error: failed to push some refs to 'git#heroku.com:mysterious-peak-4781.git'
Can someone tell me whats wrong?
Rename the app as soon as you create it. It is a must in heroku i guess.
use this command
heroku apps:rename NAME
NAME = what ever name you want to put.
If the above does not work,
type
cd .git
vi config
you will get something like this.
[remote "heroku"]
url = git#heroku.com:NAME.git
This is also a method. Change the name and try.