This question already has answers here:
Two redirection operators in one command
(5 answers)
Closed 8 months ago.
I am working on an program related to shell commands.
I want to make that, when the user enter an command, this not show any output.
I have tried adding > /dev/null to the command, this works well for commands like
$ echo "some text" | sudo tee some.txt > /dev/zero
$ cat some.txt
some text
But if the user enter a command with append (>>), the new line is not added as expected
$ echo "appending another line" >> some.txt > /dev/zero
$ cat some.txt
some text
I understood that the commands were executed from left to right, something escapes me
if the user enter a command with append (>>), the new line is not added as expected
The redirections, are executed left to right. >>some.txt redirects stdout to some.txt, then >/dev/null overwrites that redirection and redirects stdout to /dev/null. Then the command is executed and the output of echo command is redirected to /dev/null.
Related
In bash, calling foo would display any output from that command on the stdout.
Calling foo > output would redirect any output from that command to the file specified (in this case 'output').
Is there a way to redirect output to a file and have it display on stdout?
The command you want is named tee:
foo | tee output.file
For example, if you only care about stdout:
ls -a | tee output.file
If you want to include stderr, do:
program [arguments...] 2>&1 | tee outfile
2>&1 redirects channel 2 (stderr/standard error) into channel 1 (stdout/standard output), such that both is written as stdout. It is also directed to the given output file as of the tee command.
Furthermore, if you want to append to the log file, use tee -a as:
program [arguments...] 2>&1 | tee -a outfile
$ program [arguments...] 2>&1 | tee outfile
2>&1 dumps the stderr and stdout streams.
tee outfile takes the stream it gets and writes it to the screen and to the file "outfile".
This is probably what most people are looking for. The likely situation is some program or script is working hard for a long time and producing a lot of output. The user wants to check it periodically for progress, but also wants the output written to a file.
The problem (especially when mixing stdout and stderr streams) is that there is reliance on the streams being flushed by the program. If, for example, all the writes to stdout are not flushed, but all the writes to stderr are flushed, then they'll end up out of chronological order in the output file and on the screen.
It's also bad if the program only outputs 1 or 2 lines every few minutes to report progress. In such a case, if the output was not flushed by the program, the user wouldn't even see any output on the screen for hours, because none of it would get pushed through the pipe for hours.
Update: The program unbuffer, part of the expect package, will solve the buffering problem. This will cause stdout and stderr to write to the screen and file immediately and keep them in sync when being combined and redirected to tee. E.g.:
$ unbuffer program [arguments...] 2>&1 | tee outfile
Another way that works for me is,
<command> |& tee <outputFile>
as shown in gnu bash manual
Example:
ls |& tee files.txt
If ‘|&’ is used, command1’s standard error, in addition to its standard output, is connected to command2’s standard input through the pipe; it is shorthand for 2>&1 |. This implicit redirection of the standard error to the standard output is performed after any redirections specified by the command.
For more information, refer redirection
You can primarily use Zoredache solution, but If you don't want to overwrite the output file you should write tee with -a option as follow :
ls -lR / | tee -a output.file
Something to add ...
The package unbuffer has support issues with some packages under fedora and redhat unix releases.
Setting aside the troubles
Following worked for me
bash myscript.sh 2>&1 | tee output.log
Thank you ScDF & matthew your inputs saved me lot of time..
Using tail -f output should work.
In my case I had the Java process with output logs. The simplest solution to display output logs and redirect them into the file(named logfile here) was:
my_java_process_run_script.sh |& tee logfile
Result was Java process running with output logs displaying and
putting them into the file with name logfile
You can do that for your entire script by using something like that at the beginning of your script :
#!/usr/bin/env bash
test x$1 = x$'\x00' && shift || { set -o pipefail ; ( exec 2>&1 ; $0 $'\x00' "$#" ) | tee mylogfile ; exit $? ; }
# do whaetever you want
This redirect both stderr and stdout outputs to the file called mylogfile and let everything goes to stdout at the same time.
It is used some stupid tricks :
use exec without command to setup redirections,
use tee to duplicates outputs,
restart the script with the wanted redirections,
use a special first parameter (a simple NUL character specified by the $'string' special bash notation) to specify that the script is restarted (no equivalent parameter may be used by your original work),
try to preserve the original exit status when restarting the script using the pipefail option.
Ugly but useful for me in certain situations.
Bonus answer since this use-case brought me here:
In the case where you need to do this as some other user
echo "some output" | sudo -u some_user tee /some/path/some_file
Note that the echo will happen as you and the file write will happen as "some_user" what will NOT work is if you were to run the echo as "some_user" and redirect the output with >> "some_file" because the file redirect will happen as you.
Hint: tee also supports append with the -a flag, if you need to replace a line in a file as another user you could execute sed as the desired user.
< command > |& tee filename # this will create a file "filename" with command status as a content, If a file already exists it will remove existed content and writes the command status.
< command > | tee >> filename # this will append status to the file but it doesn't print the command status on standard_output (screen).
I want to print something by using "echo" on screen and append that echoed data to a file
echo "hi there, Have to print this on screen and append to a file"
tee is perfect for this, but this will also do the job
ls -lr / > output | cat output
This question already has answers here:
Difference in pipe and file redirection - BASH
(3 answers)
What is a simple explanation for how pipes work in Bash?
(11 answers)
Piping and Redirection
(5 answers)
Closed 2 years ago.
Here is something I don't understand.
Why this works : echo "akka" | cat
But this does not produce "akka" on the console : echo "akka" > cat
And this does not even work : cat < echo "akka"
For me they should be the same. But these 3 commands seem different
You are confusing the differences between file redirection and piping.
The pipe symbol | is used to pass the output of one command into another command.
Meanwhile, < and > are used for file redirection.
These are very different operations.
Example 1:
echo "akka" | cat
The echo command has the output akka, and this is piped into the standard input of the cat command. The cat command writes to standard output, so in this case it prints akka. Of course, this is no different from doing simply:
echo "akka"
Example 2:
echo "akka" > cat
The echo command has the output akka. Using >, this output is then redirected into a file called cat. There is no output shown in the terminal in this case, since the output is placed into a file instead.
Example 3:
cat < echo "akka"
This is quite different from the first two. This runs the cat command, which reads from standard input. Using <, input is passed to the cat command from a file called echo. If no such files exists, then it will produce an error.
This question already has answers here:
How to redirect and append both standard output and standard error to a file with Bash
(8 answers)
Closed 6 years ago.
I know that in Linux, to redirect output from the screen to a file, I can either use the > or tee. However, I'm not sure why part of the output is still output to the screen and not written to the file.
Is there a way to redirect all output to file?
That part is written to stderr, use 2> to redirect it. For example:
foo > stdout.txt 2> stderr.txt
or if you want in same file:
foo > allout.txt 2>&1
Note: this works in (ba)sh, check your shell for proper syntax
All POSIX operating systems have 3 streams: stdin, stdout, and stderr. stdin is the input, which can accept the stdout or stderr. stdout is the primary output, which is redirected with >, >>, or |. stderr is the error output, which is handled separately so that any exceptions do not get passed to a command or written to a file that it might break; normally, this is sent to a log of some kind, or dumped directly, even when the stdout is redirected. To redirect both to the same place, use:
$command &> /some/file
EDIT: thanks to Zack for pointing out that the above solution is not portable--use instead:
$command > file 2>&1
If you want to silence the error, do:
$command 2> /dev/null
To get the output on the console AND in a file file.txt for example.
make 2>&1 | tee file.txt
Note: & (in 2>&1) specifies that 1 is not a file name but a file descriptor.
Use this - "require command here" > log_file_name 2>&1
Detail description of redirection operator in Unix/Linux.
The > operator redirects the output usually to a file but it can be to a device. You can also use >> to append.
If you don't specify a number then the standard output stream is assumed but you can also redirect errors
> file redirects stdout to file
1> file redirects stdout to file
2> file redirects stderr to file
&> file redirects stdout and stderr to file
/dev/null is the null device it takes any input you want and throws it away. It can be used to suppress any output.
Credits to osexp2003 and j.a. …
Instead of putting:
&>> your_file.log
behind a line in:
crontab -e
I use:
#!/bin/bash
exec &>> your_file.log
…
at the beginning of a BASH script.
Advantage: You have the log definitions within your script. Good for Git etc.
You can use exec command to redirect all stdout/stderr output of any commands later.
sample script:
exec 2> your_file2 > your_file1
your other commands.....
It might be the standard error. You can redirect it:
... > out.txt 2>&1
Command:
foo >> output.txt 2>&1
appends to the output.txt file, without replacing the content.
Use >> to append:
command >> file
This question already has answers here:
How to redirect and append both standard output and standard error to a file with Bash
(8 answers)
Closed 6 years ago.
I know that in Linux, to redirect output from the screen to a file, I can either use the > or tee. However, I'm not sure why part of the output is still output to the screen and not written to the file.
Is there a way to redirect all output to file?
That part is written to stderr, use 2> to redirect it. For example:
foo > stdout.txt 2> stderr.txt
or if you want in same file:
foo > allout.txt 2>&1
Note: this works in (ba)sh, check your shell for proper syntax
All POSIX operating systems have 3 streams: stdin, stdout, and stderr. stdin is the input, which can accept the stdout or stderr. stdout is the primary output, which is redirected with >, >>, or |. stderr is the error output, which is handled separately so that any exceptions do not get passed to a command or written to a file that it might break; normally, this is sent to a log of some kind, or dumped directly, even when the stdout is redirected. To redirect both to the same place, use:
$command &> /some/file
EDIT: thanks to Zack for pointing out that the above solution is not portable--use instead:
$command > file 2>&1
If you want to silence the error, do:
$command 2> /dev/null
To get the output on the console AND in a file file.txt for example.
make 2>&1 | tee file.txt
Note: & (in 2>&1) specifies that 1 is not a file name but a file descriptor.
Use this - "require command here" > log_file_name 2>&1
Detail description of redirection operator in Unix/Linux.
The > operator redirects the output usually to a file but it can be to a device. You can also use >> to append.
If you don't specify a number then the standard output stream is assumed but you can also redirect errors
> file redirects stdout to file
1> file redirects stdout to file
2> file redirects stderr to file
&> file redirects stdout and stderr to file
/dev/null is the null device it takes any input you want and throws it away. It can be used to suppress any output.
Credits to osexp2003 and j.a. …
Instead of putting:
&>> your_file.log
behind a line in:
crontab -e
I use:
#!/bin/bash
exec &>> your_file.log
…
at the beginning of a BASH script.
Advantage: You have the log definitions within your script. Good for Git etc.
You can use exec command to redirect all stdout/stderr output of any commands later.
sample script:
exec 2> your_file2 > your_file1
your other commands.....
It might be the standard error. You can redirect it:
... > out.txt 2>&1
Command:
foo >> output.txt 2>&1
appends to the output.txt file, without replacing the content.
Use >> to append:
command >> file
This question already has answers here:
How to redirect and append both standard output and standard error to a file with Bash
(8 answers)
Closed 6 years ago.
I am running a bash script that creates a log file for the execution of the command
I use the following
Command1 >> log_file
Command2 >> log_file
This only sends the standard output and not the standard error which appears on the terminal.
If you want to log to the same file:
command1 >> log_file 2>&1
If you want different files:
command1 >> log_file 2>> err_file
The simplest syntax to redirect both is:
command &> logfile
If you want to append to the file instead of overwrite:
command &>> logfile
You can do it like that 2>&1:
command > file 2>&1
Use:
command >>log_file 2>>log_file
Please use command 2>file
Here 2 stands for file descriptor of stderr. You can also use 1 instead of 2 so that stdout gets redirected to the 'file'