I'm looking for the best way to render the outline for a cap of a sliced object.
To illustrate what I mean let's use this example from threejs: https://threejs.org/examples/?q=clip#webgl_clipping_stencil
and set it up such that we slice it only from one end like so:
This example uses the stencil buffer to generate the pink cap which is rendered onto a plane. I want to see just this cap, so if we turn off the object itself we get this:
But we're not there yet, because I want not the cap, but the outline of this cap, like in this fabricobbled example:
And that is where I'm not sure what direction to take. Since the caps are rendered on a plane, most existing outline techniques won't work, since that will give me the outlines of the plane. I could maybe do some sort of edge finding on the stencil, but there's probably a smarter and better way.
Related
I've been asked to build something similar to this so that customers can draw basics shapes of kitchen tops. Similar to that in the image below but also have dimensions.
It looks like konva has support for basic shapes like rectangle and circle etc and it also includes a transformer which allows for resizing. However, I think if I want to build a custom shape like the one in green and have individual sizing i.e. resize each individual line. I am going to have to build something myself.
I was hoping someone could point me in the right direction. I have seen an example where someone has used a "line" class which takes a series of points and then sets the attribute to closed which fills in the shape. Obviously I would need to extend this to allow the custom resizing. However, Im not sure this is the correct path to head down?
Any suggestions?
.
How about using rectangles and having an option to snap them together. It should be fairly simple to do the edge detection and snapping. Then show the result as a Konva.Line around the perimeter.
Then you can show all the control handles for the rectangles except those on the sides where another Rect has joined.
OpenGL Question:I have something to ask about clip space transformation. I am reading an online tutorial and it says that everything you draw outside the clip space will be clipped. When it come to this, does the elements outside the clip space affects the performance or not? Because it will not be drawn and thus it doesn't affect.
Assuming that it will affect performance and in case of 2d game like super mario, I am thinking about not to draw the elements outside the clip space to achieve better performance. Please clarify. Thanks.
OpenGL has only a certain amount of knowledge about your scene and will clip very late in the pipeline. It can't apply a broad phase test. Assuming you can, you should.
Supposing you had a model with 30,000 triangles, OpenGL would transform each and every one of those 30,000 triangles before considering clipping. If you know something as simple as the bounding sphere for the model it's possible you could see that the whole thing is completely outside of the frustum in a single test and save almost 30,000 extra bits of effort.
In a 2d game like Mario what this usually means is using the scroll position to index into the map and to generate geometry only for potentially visible tiles and sprites that are within the visible area.
For the map that will generally just men figuring out the (x, y) of one corner and then generating geometry for the known width and height of the screen so it means discarding the vast majority of the geometry with zero processing.
For the sprites, this is generally why in those sort of games you often see enemies reset to their starting position if you walk a little way from them and then walk back: they're added to the active list based on a map location trigger and removed when you walk far enough away. While not active, no mutable storage is afforded to them.
When several objects overlap on the same plane, they start to flicker. How do I tell the renderer to put one of the objects in front?
I tried to use .renderDepth, but it only works partly -
see example here: http://liveweave.com/ahTdFQ
Both boxes have the same size and it works as intended. I can change which of the boxes is visible by setting .renderDepth. But if one of the boxes is a bit smaller (say 40,50,50) the contacting layers are flickering and the render depth doesn't work anymore.
How to fix that issue?
When .renderDepth() doesn't work, you have to set the depths yourself.
Moving whole meshes around is indeed not really efficient.
What you are looking for are offsets bound to materials:
material.polygonOffset = true;
material.polygonOffsetFactor = -0.1;
should solve your issue. See update here: http://liveweave.com/syC0L4
Use negative factors to display and positive factors to hide.
Try for starters to reduce the far range on your camera. Try with 1000. Generally speaking, you shouldn't be having overlapping faces in your 3d scene, unless they are treated in a VERY specific way (look up the term 'decal textures'/'decals'). So basically, you have to create depth offsets, and perhaps even pre sort the objects when doing this, which all requires pretty low-level tinkering.
If the far range reduction helps, then you're experiencing a lack of precision (depending on the device). Also look up 'z fighting'
UPDATE
Don't overlap planes.
How do I tell the renderer to put one of the objects in front?
You put one object in front of the other :)
For example if you have a camera at 0,0,0 looking at an object at 0,0,10, if you want another object to be behind the first object put it at 0,0,11 it should work.
UPDATE2
What is z-buffering:
http://en.wikipedia.org/wiki/Z-buffering
http://msdn.microsoft.com/en-us/library/bb976071.aspx
Take note of "floating point in range of 0.0 - 1.0".
What is z-fighting:
http://en.wikipedia.org/wiki/Z-fighting
...have similar values in the z-buffer. It is particularly prevalent with
coplanar polygons, where two faces occupy essentially the same space,
with neither in front. Affected pixels are rendered with fragments
from one polygon or the other arbitrarily, in a manner determined by
the precision of the z-buffer.
"The renderer cannot reposition anything."
I think that this is completely untrue. The renderer can reposition everything, and probably does if it's not shadertoy, or some video filter or something. Every time you move your camera the renderer repositions everything (the camera is actually the only thing that DOES NOT MOVE).
It seems that you are missing some crucial concepts here, i'd start with this:
http://www.opengl-tutorial.org/beginners-tutorials/tutorial-3-matrices/
About the depth offset mentioned:
How this would work, say you want to draw a decal on a surface. You can 'draw' another mesh on this surface - by say, projecting a quad onto it. You want to draw a bullet hole over a concrete wall and end up with two coplanar surfaces - the wall, the bullet hole. You can figure out the depth buffer precision, find the smallest value, and then move the bullet hole mesh by that value towards the camera. The object does not get scaled (you're doing this in NDC which you can visualize as a cube and moving planes back and forth in the smallest possible increment), but does translate in depth direction, ending up in front of the other.
I don't see any flicker. The cube movement in 3D seems to be super-smooth. Can you try in a different computer (may be faster one)? I used Chrome on Macbook Pro.
I want to do what they do in Minecraft and that is take a 2d item and make a it 3d.
This:
to this:
Anyone have idea how I would do this without making a model in a seperate program
Well, if you have proper images with a nice contrast to the background, you could try to read the image's pixel value and contrast and try to find the outline of those images. As a next step, you would use Three.Shape or Three.Path and trace the outline with LineTo. Afterwards, you use an ExtrudeGeometry and extrude the shape into a 3d-object.
The main problem is finding the outline, i guess. This would only work with proper images and depending on the quality you want to achieve, you will have to implement the proper algorithms, see edge detection filters maybe.
Or being very simplistic, read the pixel values, if they are white or close to white, ignore them and if they are not, Draw another line.... something like that...
I'm trying and failing to work out how to achieve a quad-tree of materials (images) on a single plane, much like a Google Maps-style zoomable tile that gets more accurate the closer you get.
In short, I want to be able to have a 1x1 image texture (covering a plane that is 256 units wide and tall) that can then be replaced with a 2x2 texture, that can then be replaced with a 4x4 texture, and so on.
Like the image example below…
Ideally, I want to avoid having to create a different plane for each zoom level / number of segments. A perfect solution would allow me to break a single plane into 8x8 segments (highest zoom) and update the number of textures on the fly. So it would start with a 1x1 texture across all 64 (8x8) segments, then change into a 2x2 texture with each texture covering 4x4 segments, and so on.
Unfortunately, I can't work out how to do this. I explored setting the materialIndex for each face but you aren't able to update those after the first render so that wouldn't work. I've tried looking into UV coordinates but I don't understand how it would work in this situation, nor how to actually implement that in Three.js – there is little in the way of documentation / examples for this specific case.
A vertex shader is another option that came up in research, but again I don't know enough to understand how to construct that.
I'd appreciate any and all help with this, it will be a technique that proves valuable for other Three.js users I'm sure.
Not 100% sure what you are trying to do, whether you are talking about texture atlasing (looking up and different textures based on current setting/zooms) but if you are looking for quad-tree based texturing that increases in detail as you zoom in then this is essentially what mipmaping is and does.
(It can be also be used to do all sorts of weird things because of that, but that's another adventure entirely)
Generally mipmapping is automatic based on the filtering you use - however it sounds like you need more control over it.
I created an example hidden away in the three.js source tree which may help:
http://mrdoob.github.com/three.js/examples/webgl_materials_texture_manualmipmap.html
Which shows you how to load each mipmap level in manually, rather than have it just be automatically generated.
HTH