I have two templates;
first - select count(*) as row_count from table
second - <#if ${row_count} < 0 No data </#if>
Is it possible to pass the output from first template to the second one?
Related
I want to add an option for the user when creating the report to select the columns that the report will show. See the attached image below on how it is suppose to look.
Is there a way to do that?
I don't know about the parameter dialog, but assuming that your column names are in an array.
You can have an SQL query with all possible column names
(probably you should use special comments to mark the beginning and end of the select list).
E.g.
select
'X' as dummy
-- BEGIN COLS
, column1
, column2
...
-- END COLS
from ...
where ...
order by ...
Then, in the beforeOpen event of the query, you can access and modify the query with this.queryText (IIRC) and remove all those lines ("," + columnname) in the marked part for which columnname is not contained in the array.
set variable names on jdbc preprocessor.
variable names : aa,bb
excute query
select aa, bb from table;
try to get the variable names on jsr223 preprocessor
log.info(vars.get("aa"));
but this via aa is null
how to use variable names?
Looking into JDBC Request Sampler documentation:
If the Variable Names list is provided, then for each row returned by a Select statement, the variables are set up with the value of the corresponding column (if a variable name is provided), and the count of rows is also set up. For example, if the Select statement returns 2 rows of 3 columns, and the variable list is A,,C, then the following variables will be set up:
A_#=2 (number of rows)
A_1=column 1, row 1
A_2=column 1, row 2
C_#=2 (number of rows)
C_1=column 3, row 1
C_2=column 3, row 2
So it will be:
vars.get('aa_1') - for first row of the aa column
vars.get('aa_2') - for second row of the aa column
vars.get('bb_1') - for first row of the bb column
etc.
More information: Debugging JDBC Sampler Results in JMeter
pl SQL code segment
SELECT Xmlserialize(DOCUMENT
XMLELEMENT("intrastat",
XMLAGG(
Xmlforest(ENVELOPE_ID AS "envID",
XMLFOREST(DATE_ AS "date",TIME_ AS "Time")AS "Date
time", PARTY_ID AS "pid",PARTY_NAME AS "pname",
XMLFOREST(Xmlelement("RC",REGION_CODE) AS RC,Xmlelement("TCPCODE",MODE_OF_TRANSPORT_CODE) AS TCPCODE) AS "item")
)))
FROM INTRASTAT_XML_TEMPLATE_LINE_TMP
part of actual output that make the trouble
<item><RC><RC>as</RC></RC><TCPCODE><TCPCODE>22</TCPCODE></TCPCODE></item>
what i want to get
<item><RC>ads</RC><TCPCODE>22</TCPCODE></item>
Your current plsql code segment :
XMLFOREST(Xmlelement("RC",REGION_CODE) AS RC,Xmlelement("TCPCODE",MODE_OF_TRANSPORT_CODE) AS TCPCODE) AS "item")
And as we have used aliases in here, we are getting multiple tags - One for alias, and one for the first parameter of XMLELEMENT function.
Now, since you just want an element - item, with two tags - RC (holding data of REGION_CODE field) and TCPCODE (holding data of MODE_OF_TRANSPORT_CODE field),
in my opinion, this should suffice your requirement:
Xmlelement("item", XMLFOREST(REGION_CODE "RC", MODE_OF_TRANSPORT_CODE "TCPCODE")
~Kuntal
with data(rc, tcpcode) as (select 'ads', 22 from dual)
select xmlelement("item", xmlforest(rc, tcpcode)) from data;
XMLELEMENT("ITEM",XMLFOREST(RC,TCPCODE))
--------------------------------------------------------------------------------
<item><RC>ads</RC><TCPCODE>22</TCPCODE></item>
I have problem:
- I have select statement
Select name from org where id = 123
I can get value from statement that puting into header
ex: result is "aread" then header column is "aread"
Thanks!
Possible duplicate:
Oracle - dynamic column name in select statement
Question:
Is it possible to have a column name in a select statement changed based on a value in it's result set?
For example, if a year value in a result set is less than 1950, name the column OldYear, otherwise name the column NewYear. The year value in the result set is guaranteed to be the same for all records.
I'm thinking this is impossible, but here was my failed attempt to test the idea:
select 1 as
(case
when 2 = 1 then "name1";
when 1 = 1 then "name2")
from dual;
You can't vary a column name per row of a result set. This is basic to relational databases. The names of columns are part of the table "header" and a name applies to the column under it for all rows.
Re comment: OK, maybe the OP Americus means that the result is known to be exactly one row. But regardless, SQL has no syntax to support a dynamic column alias. Column aliases must be constant in a query.
Even dynamic SQL doesn't help, because you'd have to run the query twice. Once to get the value, and a second time to re-run the query with a different column alias.
The "correct" way to do this in SQL is to have both columns, and have the column that is inappropriate be NULL, such as:
SELECT
CASE WHEN year < 1950 THEN year ELSE NULL END AS OldYear,
CASE WHEN year >= 1950 THEN year ELSE NULL END AS NewYear
FROM some_table_with_years;
There is no good reason to change the column name dynamically - it's analogous to the name of a variable in procedural code - it's just a label that you might refer to later in your code, so you don't want it to change at runtime.
I'm guessing what you're really after is a way to format the output (e.g. for printing in a report) differently depending on the data. In that case I would generate the heading text as a separate column in the query, e.g.:
SELECT 1 AS mydata
,case
when 2 = 1 then 'name1'
when 1 = 1 then 'name2'
end AS myheader
FROM dual;
Then the calling procedure would take the values returned for mydata and myheader and format them for output as required.
You will need something similar to this:
select 'select ' || CASE WHEN YEAR<1950 THEN 'OLDYEAR' ELSE 'NEWYEAR' END || ' FROM TABLE 1' from TABLE_WITH_DATA
This solution requires that you launch SQLPLUS and a .sql file from a .bat file or using some other method with the appropriate Oracle credentials. The .bat file can be kicked off manually, from a server scheduled task, Control-M job, etc...
Output is a .csv file. This also requires that you replace all commas in the output with some other character or risk column/data mismatch in the output.
The trick is that your column headers and data are selected in two different SELECT statements.
It isn't perfect, but it does work, and it's the closest to standard Oracle SQL that I've found for a dynamic column header outside of a development environment. We use this extensively to generate recurring daily/weekly/monthly reports to users without resorting to a GUI. Output is saved to a shared network drive directory/Sharepoint.
REM BEGIN runExtract1.bat file -----------------------------------------
sqlplus username/password#database #C:\DailyExtracts\Extract1.sql > C:\DailyExtracts\Extract1.log
exit
REM END runExtract1.bat file -------------------------------------------
REM BEGIN Extract1.sql file --------------------------------------------
set colsep ,
set pagesize 0
set trimspool on
set linesize 4000
column dt new_val X
select to_char(sysdate,'MON-YYYY') dt from dual;
spool c:\DailyExtracts\&X._Extract1.csv
select '&X-Project_id', 'datacolumn2-Project_Name', 'datacolumn3-Plant_id' from dual;
select
PROJ_ID
||','||
replace(PROJ_NAME,',',';')-- "Project Name"
||','||
PLANT_ID-- "Plant ID"
from PROJECTS
where ADDED_DATE >= TO_DATE('01-'||(select to_char(sysdate,'MON-YYYY') from dual));
spool off
exit
/
REM ------------------------------------------------------------------
CSV OUTPUT (opened in Excel and copy/pasted):
old 1: select '&X-Project_id' 'datacolumn2-Project_Name' 'datacolumn3-Plant_id' from dual
new 1: select 'MAR-2018-Project_id' 'datacolumn2-Project_Name' 'datacolumn3-Plant_id' from dual
MAR-2018-Project_id datacolumn2-Project_Name datacolumn3-Plant_id
31415 name1 1007
31415 name1 2032
32123 name2 3302
32123 name2 3384
32963 name3 2530
33629 name4 1161
34180 name5 1173
34180 name5 1205
...
...
etc...
135 rows selected.