I've cloned a laravel project from github private repo and trying to setup on my local. The project uses AWS secret manager, so when I try to run composer install I get secret manager error in WrappedHttpHandler.php and RequestException.php vendor files. I removed aws from composer.json file and deleted aws.php file from the config folder. But still can't run composer install command for setuping the project on my local machine.
So, do you know guys how to remove secret manager package from the Laravel(version 5.7) project?
Related
I have added Laravel Nova to our application and purchased a license. On the local server everything works perfectly. However, when I try to deploy the updated application to our linux server and run composer update it says:
Failed to download laravel/nova from dist: /var/www/{myPath} does not exist and could not be created.
Now trying to download from source
Syncing laravel/nova (3.29.0) into cache
Cloning failed using an ssh key for authentication, enter your GitHub credentials to access private repos
Head to https://github.com/settings/tokens/new It will be stored in "/var/www/{myPath}"
So I created a GitHub Token and added the Laravel Nova credentials to the auth.json file on the server too. Everything should be correct and it is working on the local copy as I said before. However, I am getting the following errors:
[RuntimeException]
Failed to execute git clone --mirror -- 'git#github.com:laravel/nova.git' '/var/www/{myPath}/.cache/composer/vcs/git-github.com-laravel-nova.git/'
Cloning into bare repository '/var/www/{myPath}/.cache/composer/vcs/git-github.com-laravel-nova.git'...
ERROR: Repository not found.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
How could I solve this problem?
Deleting the /vendor directory and the composer.lock file and running composer install --optimize-autoloader --no-devsolved the problem.
I had a similar problem and finally figured out the cause and its due to the laravel/nova:3.29. A minor upgrade to 3.30 fixed the issue for me without having to delete the whole composer.lock file as it will update some other packages as well.
Create file at root directory with name "auth.json"
copy your nova credentials to it
{
"http-basic": {
"nova.laravel.com": {
"username": "email",
"password": "passsword"
}
}
}
composer update
So I am using Laravel Homestead for my local development. I opted to install it per-project rather than globally so that all of my Homestead configuration files would be tracked in my git repository. To keep my repository clean, I opted to place the entirety of the Laravel application into a sub-directory named 'code'.
This, however, has presented me with a challenge when attempting to deploy my application via Envoyer. It seems as though Envoyer assumes the Laravel application files are in the root directory of the repository. As such, when it attempts to deploy it fails.
I've been searching around and can't seem to find any way of specifying to Envoyer that my Laravel application files are not in the root directory of the repository but are in the 'code' directory. Any help would be greatly appreciated!
Repository Structure:
/
- Homestead related files
- /code
- Laravel application files
I have setup Minishift on my computer and installed a custom laravel from a github repo on minishift using the web console.
How do I access the downloaded files locally and test my application?
I solved the issue using cwRsync client. As per the official documentation given below:
https://docs.okd.io/latest/dev_guide/copy_files_to_container.html
So, I recently made two big changes ... moved my code from bitbucket to github, and set up a pipeline on heroku with a new staging app (original app is now production).
I got a new github token and placed it into the auth.json file as was done with the previous bitbucket repo (it's a private repo). However, when I push to heroku to build the code with composer there, I cannot connect with the laravel spark repo.
Error:
Installing laravel/spark (v3.0.5): Downloading (failed) Failed to download laravel/spark
from dist: The "https://api.github.com/repos/laravel/spark/zipball/512af184c15d793c33328ff03313553ea6feacba"
file could not be downloaded (HTTP/1.1 404 Not Found)
Now trying to download from source
Installing laravel/spark (v3.0.5): Cloning 512af184c1
[RuntimeException]
Failed to execute git clone --no-checkout 'https://***:***#github.com/laravel/spark.git' '/tmp/build_9916d292e7eb72e0fbe34f47e3d9854c/vendor/laravel/spark' && cd '/tmp/build_9916d292e7eb72e0fbe34f47e3d9854c/vendor/laravel/spark' && git remote add composer 'https://***:***#github.com/laravel/spark.git' && git fetch composer
remote: Repository not found.
fatal: repository 'https://***:***#github.com/laravel/spark.git/' not found
What I have tried ...
Setting the github api token on heroku with
heroku config:set GITHUB_API_TOKEN=<token>
Setting the composer github token
composer config -g github-oauth.github.com <token>
I am connected to the Laravel Spark repo on github and when I run composer on my local machine I am not prompted for a spark token. Every other dependency that I have runs fine - I can change the auth.json and that is not the case, so I don't think this is a problem with lack of access to my github.
Does anyone know how Laravel - Spark checks to grant access and how we can check to see where we are going wrong? There should be a checklist of things that can be looked at if access is denied.
Any help is appreciated. Been stuck for almost a week. I really need some way to figure out how to connect to the Spark repo.
(Edit) Spark is a composer satis repo. I can't really find any info on how to prompt this type of repo to tell me why I can't clone it or how best to communicate with it.
(Edit 2) Also tried changing the git config to ensure that it had the right token. This should be overwritten by the files, but I tried it anyway.
git config github.accesstoken <token>
The response from the software providers is to use an alternative method and place the code under my source control so that composer is not trying to load it. I do not wish to do this for a number of reasons. Again, I need a way to clone the satis repo in composer.
Edit 3: I have also tried going to the URL of the repo and attempting to access one of the versions. This displays the same error as when you go to the URL in the error directly (it's the same URL).
{
"message": "Not Found",
"documentation_url": "https://developer.github.com/v3/repos/contents/#get-archive-link"
}
This seems to back up the belief that this is not a composer issue, but something to do with a github setting or spark setting.
Edit 4: It occurred to me that my problems started after upgrading to V6 and I am getting denied access to the spark repo containing versions 1-5 and version 6 is separate. I upgraded my spark version to 6 and had access to that repo. I then tried uploaded the code base to heroku that had version 6 but was denied access to the repo there.
I also tried ...
heroku config:set github_oauth=<token>
Edit 5: I noticed that the output from pushing to heroku included the phrase
NOTICE: Using $COMPOSER_GITHUB_OAUTH_TOKEN for GitHub OAuth.
In response, I found an article asserting that the oauth token should be set in the config portion of composer.json as ...
"config": {
"github-oauth": {
"github.com": "<token>"
}
}
I tried it, but it didn't work
So, it turns out there were several issues. The final big one was that for some reason, I had to delete my api personal token used for github access and create a new one with full privileges for everything. Once that was set up, I had access and was able to reduce the privileges to repo only.
https://github.com/ladybirdweb/agorainvoicing Use open source Agora Invoicing software. It has all the tools you need to start software selling business. It is build on Laravel framework and is very similar to Laravel Spark
I'm trying to deploy Laravel 5.2 to Azure from Github. I keep getting this deploy error. I'm not sure how to add the token. I created one at my github account and added it with: composer config github-oauth.github.com ". This added the auth.json with the token information, but still no luck when trying to deploy. I get the same error. What am I doing wrong?
Command: D:\home\SiteExtensions\ComposerExtension\Hooks\deploy.cmd
Install Dependencies with Composer
Loading composer repositories with package information
Installing dependencies from lock file
- Installing nesbot/carbon (1.21.0)
Downloading
Could not fetch https://api.github.com/repos/briannesbitt/Carbon/zipball/7b08ec6f75791e130012f206e3f7b0e76e18e3d7, please create a GitHub OAuth token to go over the API rate limit
Head to https://github.com/settings/tokens/new?scopes=repo&description=Composer+on+RD00155DB2046E+2016-02-21+1233
to retrieve a token. It will be stored in "D:\home\site\repository/auth.json" for future use by Composer.
Token (hidden): No token given, aborting.
You can also add it manually later by using "composer config github-oauth.github.com <token>"
Command 'starter.cmd D:\home\SiteExt ...' was aborted due to no output nor CPU activity for 60 seconds.
You have to manually enter the command in azure web app console.
yes before command execution you have to add composer extension to your app from azure extensions.
type below command: composer config github-oauth.github.com
you can generate personal token from github seetings.
P.S let us know if you have any easy method to do so