There is an autorun on my flash drive. I have an inf file.
I specify an icon in it (icon = Falanfilan.ico) and Windows reads and executes it without any problems, but the open= command does not work?
Likewise, if I use the useautorun= command, I still get the same result.
[AutoRun]
icon=yes.ico
open=test.exe
Microsoft explained it with --> https://learn.microsoft.com/en-us/previous-versions/windows/desktop/legacy/cc144206(v=vs.85)
So how can I follow a path? Why is the start command not working? Or what am I doing wrong?
Related
I am trying to uninstall Oracle on this Windows 7 (64 bit) machine by downloading a standalone tool from Oracle, I need to run a batch file that is supposed to uninstall but I am unable to run it.
I tried to open command prompt as administrator and I am trying to run this as below:
As you can clearly see from the screenshot, I am doing a "dir" on the directory and can clearly see the file right there. Not sure what's going on here.
I also tried to run the batch file by double clicking from Windows Explorer and a terminal window opens and closes quickly but the batch file is not doing what it is supposed to do (it is clearly not executing from Windows Explorer).
Can anyone help me with this?
As theB pointed out above in a comment, this worked for me:
Open the bat file in notepad. I'll bet it starts with #echo off, and
that the error is actually coming from inside the batch file. The
error if the batch file itself wasn't found is 'X' is not recognized
as an internal or external command, operable program or batch file
'Run as Administrator' changes the current directory. See my answer here
Difference between "%~dp0" and ".\"?
Redirecting CMD Commands To An EXE File
Long story short, basically I have the problem that every time I run BCDedit on the .BAT that I converted into an .EXE it never worked and I thought that the reason why it wasn't work was because it wasn't on Path but my Path was fine and even if it was on Path is set by default thanks to foxidrive.
Now my main problem is that is there a way I can convert it to an .EXE file with every single command working, is there a technique I could use to get BCDedit working as an .EXE file?
All of the commands do work it just BCDedit and I say if every single command would work so if somebody has a similar command problem like me they know how to figure it out, it works perfectly as batch but is there a way I can convert it and make BCDedit still work as an .EXE?
Please answer As Soon As Possible and if you want to take a look at my Path and Batch the visit the link at the top.
Thank you so much!
Compile this batch file and see if it works:
#echo off
bcdedit /?
pause
Then try this version:
#echo off
c:\Windows\System32\bcdedit.exe /?
pause
Just as the SysWow64 Redirection link you listed states. If you want a x86 application to call the 64-bit system directory you need to call the bcdedit application as follows.
%SystemRoot%\SysNative\bcdedit
This is because of Windows backwards compatibility measures, it is looking at C:\Windows\SysWOW64 instead of C:\Windows\System32. Another alternative would be to compile the script as both x86 and 64-bit, but then you could only use each on the respective systems.
Update for Comments
Even though the path is correct, an x86 application will execute commands or batch scripts against the C:\Windows\SysWOW64\cmd.exe which will cause the path redirection issue. Example to illustrate my point. On a 64-bit version of Windows, open C:\Windows\SysWOW64\cmd.exe and using Windows explorer create two unique files , one is C:\Windows\System32\unique_test64.txt and the other in C:\Windows\SysWOW64\unique_test86.txt. Now on the x86 command prompt enter if exist C:\Windows\System32\unique_test86.txt echo true. You will see that it is being redirected to SysWOW64 and will print true. And if you enter if exist C:\Windows\System32\unique_test64.txt echo true, nothing will be found.
Screenshot Example: http://i.imgur.com/K4kkI29.png
I'm trying to create a .cfg file for bcc32 compiler and I'm following the instructions. I have installed correctly and placed an environment path as instructed but when I type "edit bcc32.cfg" into the command prompt it says that edit isn't a valid command? What am I supposed to do?
You could also create a .bat file, edit.bat, to replace the 16-bit edit program (removed because x64 windows flavors won't run it) which would launch your favorite editor.
#echo off
notepad %1
#echo on
This is what I wound up doing as a simple patch so I could carry on the way I always had for the most part. Just type:
edit myfile.ext
in the command prompt to use it.
Note: notepad is not my favorite editor - this is just an example that will work with stock windows.
Note 2: #echo off and #echo on are shown for clarity. You may also shorten this by omitting the echo statements and simply placing the # before the command to be silenced.
#notepad %1
I just use notepad (since they took out the edit command) from the command window like so:
C:\Borland\BCC55\bin> notepad bcc32.cfg
The file will open in notepad for editing. When you've finished editing the file, save it and you're done.
I have found this works for seeing in-window text of a complete file, on a 64bit machine. Once your path is set in cmd prompt, type the word type... followed by "filename" do you see how I used the quotes around the filename only!
type "filename"
You type it just like this (changing filename for your files name) and you will be able to see the entire file text in the cmd window. Not sure how to edit from here on but maybe someone can figure it out from here and tell me.
Assuming you're using Windows 7 (where edit.exe and edlin.exe have been removed):
Use powershell.exe instead of cmd - thereby edit will be available via command line.
Take a look at: http://en.wikipedia.org/wiki/Windows_PowerShell
simple answer....
if your using an old version of windows (xp e.t.c...) you would be able to use edit
but since your using new version of windows, Microsoft has updated and removed the commands that they think are not relevant e.g.. (msg, edit) depending if its a bit32 bit64 or bit82...
It is very stupid that windows will not let you add batch files to your quick launch or whatever they call in in windows 7. That bar across the bar, i can attach firefox there, command prompt, even paint (my favorite), but not a batch file. I can "pin" it to another program, which is just weird. I want it to standalone, the batch file does enough work by itself.
So lets say i have batch file. What is the simplest executable program I can write to invoke said script. Then I can finally pin all my useful batch files on that quick-jump-pin-bar.
If I remember right, you can do this by first pinning a shortcut to CMD.exe to the taskbar. Then edit the command, and change CMD.exe to CMD.exe /c MyBatchFile.bat. I believe this will execute the batch file.
Since you can only pin one cmd, here's an alternative, assuming you have the .NET framework installed - a very simple C# application:
Populate a textfile with the following contents:
class Program {
static void Main() {
System.Diagnostics.Process.Start(#"c:\test.bat");
}
}
where Program is the name of the executable you want to create, and c:\test.bat is the full path to the batch file. Save the file as Program.cs. Execute the following from the command line:
c:\Windows\Microsoft.NET\Framework\v2.0.50727\csc.exe Program.cs
You can replace 2.0.50727 with whatever directory exists on your machine - might be 1.1.something or 3.5 or 4.0.something - it's all the same for this scenario.
This will generate Program.exe. You can put that exe file wherever you want, and pin that executable to the taskbar. You can discard the .cs file once you're done making your executables.
Kind of a crappy solution, but it should work, assuming you don't find anything better. And if you don't have the .NET framework (which I'm not sure is even possible in Windows 7), you can install it pretty easily.
The easiest way is to create a folder, put your batch files in it, and pin the folder to the menu bar :D
You can also write a startup script, so the batch file will be executed on startup, but I don't know if you want to run those scripts on every bootup... You can also add the command prompt to the bar, and edit the startup path..
Use command switches on CMD.exe.
cmd.exe /c "myscript.bat"
As a sort of workaround you could use the following trick. Pin an arbitrary application to the task bar, Shift+right click on the pinned icon, select Properties, change 'Target' and 'Start in' accordingly. Rename it too if you like.
You can pin more than one .bat file using this technique.
I was downgraded from Vista to XP for reasons that are not relevant.
I found very useful the snipping tool which is not available in XP so I decided to create my own.
alt text http://img81.imageshack.us/img81/8851/snip251609121640.png
It works just fine so I put it int .cmd file for easy launching ( I didn't feel like creating the .jar file )
My only problem now is the command prompt screen pops up and disappear giving an unpleasant effect.
This is it:
echo off
start javaw -classpath lib\myutil.jar;classes recortes.Main
Is there a way the command just run without blinking ? ( other than creating the .jar file? )
EDIT
I have followed the advice of Jeffrey. I had a shorcut to the .cmd file, now the shortcut it self has the following:
"C:\Archivos de programa\Java\jre6\bin\javaw.exe" -classpath lib\myutil.jar;classes -Djava.util.logging.config.file=logging.properties recortes.Main
Start in:
C:\Users\oreyes\recortes
And works just fine!
Thanks
Create a shortcut (.lnk) file which contains the path to the executable with arguments. See KB244677 for information on how to do this from a script.