Hi, 1hour ago I clicked at something by mistake at the debug, and since then the debug been ruined.
I cant see the values unless I click show value.
Now, when working with debug in order to solve complicated problems, its pretty much annoying.
How to solve this problem? google doesn't say anything.
If anybody wants to know:
Go to debug at PyCharm.
There is a settings there.
Look for variable loading policy.
then click asynchronously.
And debug again and it should be fixed.
Related
I think in this case, a picture will be worth a thousand words. I really have no idea why this is happening, but the error is in my code, and nothing I have tried will allow me to see. Nothing is blackboxed. Nothing is filtered out. The things that look greyed out like they are disabled, are disabled. I cannot edit them. Unchecking "Group Similar" has no effect.
You can see where I point to the red lines, it looks like they are indicative a hidden error message here.
I am using Version 65.0.3325.181 (Official Build) (64-bit). Did I do this somehow? Is this a bug maybe? Any insight would be appreciated.
go to console and press f1 to go to setting. At the end of page you get link to restore setting and reload.
I'm not really sure how to best word this, but let's say I'm on a web page and when I click a certain button, something undesirable happens. Like a whole bunch of content disappears. Is there a way in the Firefox debugging tools where I can insert a watch on that button so when I click it, the debugger will pause the JS execution and show me exactly where in the code it's executing the stuff I don't want?
(note: obviously this is code I did not write, otherwise I'd know where to look to fix the problem)
Yes, in the debugger there is an events pane, and you can break when a specific event is triggered. The documentation is here:
https://developer.mozilla.org/en-US/docs/Tools/Debugger#events-pane
Firefox has a good built-in profiler - you can click the start profile, and click it again to end, and see what parts of the code are running the most.
This is really helpful in finding performance problems too.
Edit: I see "Silverlight -" is in front of my question, which I realize may have something to do with the alphabetical order of my tabs... really Visual Studio 2013 should be in front, anyone know if that can be changed?
I've been using the newer Visual Studio 2013 for about a week now, and I've found some quirks with it. The one that seems to happen the most is when I'm in the XAML editor working on something, suddenly if I go over to the property window I can't enter anything. I'm not running/debugging. I can type stuff in the regular XAML code editor window.
Even stranger, one of the times, I could get the cursors to appear in the fields. I typed a bunch of junk and just one character from what I types appeared. Another time I couldn't enter values into the properties, but I could double click on an event in the events window and create a new event handler. Just a minute ago I had the opposite, where I couldn't double click in the events window.
I think VS 2013 introduced async handling of more things, could it be related to that? Or perhaps because I'm using Silverlight? Right now my only workaround is to restart VS, does anyone have any knowledge about this? Anyone else experienced this?
I'm going to submit a bug report, but it would be a while before there's a patch, so I'm wondering if maybe someone understand the problem better and has a workaround? Or maybe just confirm that this exists and that I'm not crazy/my computer's haunted.
Edit:
I should mention another weird thing that happened two nights ago. I thought it was some how my doing, but I never figured out how I could have managed it without noticing. I was working on a piece of code, went to run after changing a few lines, and suddenly I had a ton of compiler errors. I go over to a user control I haven't touched in hours and suddenly the main LayoutRoot grid is completely empty. Luckily I'd committed to source control, but still...
I found an easy way to deal with this problem. It happens a lot after debugging so what I did was I created a batch file on my desktop containing this line taskkill /f /im XDesProc.exe and I run it every time the properties start misbehaving. Its the quickest way to reload the designer's functionality. I submitted this bug to microsoft they claim it will be included in the next update.
Me and another guy are developing a silverlight app and having the same exact problem. I accidentally found where the bug lies and how to mess with it to allow you to type "very briefly". Apparently this has something to do with tooltips. If you hover over anything in the property window when this bug is happening and allow a tooltip to popup while your cursor is blinking in a field, for the duration that the tooltip is up you can resume typing normal. As soon as the tooltip times out and disappears you can't type. So the only way you can edit or search properties is while a mouse tooltip is floating active. Very unusual. Can't seem to find any kind of tooltip settings in the program and the situation is very hard to find on google because search results assume your talking about programming tooltips. As far as I know we have had this issue since before release candidate. We are currently on official update 1 with the same problem persisting.
I need to debug some JavaScript an' I use Chrome dev tools. I'm a newby in JavaScript (just started to learn a couple of days ago), an' at work I could set breakpoints via the Resources pane. But at home for some reason I can't do this: after the click no breakpoint appeares.
I have Chrome version: 26.0.1410.64 m.
What could be the case?
clicking on the De-Obfuscate Source button (i.e. {}) solved this issue for me.
I'm a fool! haha! breakpoints are set in the Source pane )))
It's been a while, but in version 33.0.1750.146, but my problem was that I was on the Sources pane (I'd call this a tab; it's one of the items at the very top of the window), but I was on the Content scripts tab (on the left hand side). I needed to switch to the Sources tab.
To be clear, there are two sets of Sources tabs; one is within the other.
UPDATE 2016-01-07: Now I'm on 47.0.2526.106. The only thing that worked for me today was to close DevTools and re-open. It was a little finicky. It worked once, then stopped, and I had to close the DevTools and re-open again. I saw #johntrepreneur's answer about closing the browser, but unfortunately I have too many tabs open on too many workspaces, so that's too much of a pain, so I didn't try that, although I have to assume that would work.
Other solutions didn't work for me. Had to close and restart browser to be able to set breakpoints again.
This also happens when there is a JS error in your code.
Some sort of weird built in function in windows 10 i think because I did press a few buttons by accident. Some of my keys even stopped working in certain areas of visual studio. F.e the letter "c" stopped working in the find window.
Mine did this and no solution worked, i pressed alt, windows key and function key a few times and my problem went away.
Fixed as follows: For me, the issue stems from having set up Chrome to interact with operating system files. If you set this up, then the fact is evident from a green dot by the file name. At some point, I could not set a breakpoint in a recently edited file. I fixed this by disconnecting the interaction, as follows: When viewing "sources", above the code, there were some file names listed. Clicking the [x] to make the particular filename go away gave a caution message; I proceeded without saving. After that, I was able to set breakpoints for that file.
I also had this problem. However, once I closed the popup message in my browser, suddenly all my breakpoints that I set in that time appeared. Mental note: Don't set breakpoints while your app is showing a popup.
I couldn't find any direct fix for this problem.
It seems that chrome keeps settings of your site stored somewhere whatever you do to clean it. (I tried removing the folder from workspace, closing et reopening chrome etc... and nothing worked).
A workaround is to change your site's url to make chrome consider it a new site
This is probably a really dumb question but i'll ask anyway.
I was wondering if there was any reason as to why a form wouldn't display its code when i click "view code" from the right click context menu in vb6?
It was working awhile ago so i'm kind of stumped.
Thanks
If forms are still not visible, try Window -> Cascade - This was the way I goit my forms visible again.
Maybe it is being displayed under something else. Check under the Window menu. Do you see it there?
Does the form display if you right click and select 'View Object'? If so, try double clicking on the form - that should display the source. You might also check the permissions to the file.
This is an old question, but since it's the first link retuned by a Google search, answering here may help many people.
Like someone else said, Window/Cascade does the trick, but with time it becomes annoying.
I have the same problem on my laptop with an external display. Closing the laptop cover (thus going back to only one display) fixes the issue.
An alternate way is to display the VB6 IDE on the main display (your main display is the one with icons on the bottom right corner). You can set your main display under System Preferences/Displays. There's a checkbox called "make this one the main display", it does not need to be your monitor #1.
Problem does not seem to occur if you have 2 displays side-by-side. Also, the fact that my laptop's resolution is not the same as the external display's resolution may cause the issue.
After taking these steps, you may have to restart the VB6 IDE to fix the issue.