could not establish a connection to the queue manager - reason 2538. (amq4059) severity: 10 (warning)
explanation: the attempt to connect to the queue manager failed. this could be because the queue manager is incorrectly configured to allow a connection from this system, or the connection has been broken. response: try the operation again. if the error persists, examine the problem determination information to see if any information has been recorded.
Please tell how do I resolve this.
Related
The problem: MQ Explorer on a Windows Server machine with connections to a number of remote queue managers in a Linux env. I have migrated a new queue manager to the Linux env and added it as a remote queue manager in MQExploirer, but it will not connect, returning the following error:
Queue manager not available for connection - reason 2059. (AMQ4043)
Severity: 20 (Error) Explanation: The attempt to connect to the queue
manager failed. This could be because the queue manager is incorrectly
configured to allow a connection from this system, or the connection
has been broken. Response: Ensure that the queue manager is running.
If the queue manager is running on another computer, ensure it is
configured to accept remote connections.
Things I have already checked:
MQ Explorer connects to other remote qmgrs on the same machine
The configuration of the new qmgr connection on MQExplorer is identical to the preexisting ones
The new qmgr is up and running
I have a telnet connection from the windows env to the new qmgr's port
The new qmgr has the same channel and listener with the same configuration as the qmgrs that connect successfully
Most of the advice I've seen on this problem is covered by points 1 and 3. Can anyone suggest anything else I can try?
We've tryed to test connection to the remote queue manager after installing MQ client v7.5 on Windows Server 2019. We've used Rfhutilc for this and got 'Host not available' inspite of the fact that telnet connection to the corresponding address was succecfully established. Also we tryed to connect using MQ client v9.0 with the same result.
AMQERR01.LOG (client v.7.5) reported following details:
29.09.2020 15:36:10 - Process(10828.2) User(Администратор) Program(rfhutilc.exe)
Host(-) Installation(Installation1)
VRMF(7.5.0.6)
AMQ9208: Error on receive from host 'X.X.X.X'.
EXPLANATION: An error occurred receiving data from 'X.X.X.X' over TCP/IP. This may be due to a communications failure.
ACTION: The return code from the TCP/IP recv() call was 10054 (X'2746'). Record these values and tell the systems administrator.
----- amqccita.c : 4065 -------------------------------------------------------
29.09.2020 15:37:56 - Process(10828.1) User(Администратор) Program(rfhutilc.exe)
Host(-) Installation(Installation1)
VRMF(7.5.0.6)
AMQ9202: Remote host 'X.X.X.X' not available, retry later.
EXPLANATION: The attempt to allocate a conversation using TCP/IP to host 'X.X.X.X' was not successful. However the error may be a transitory one and it may be possible to successfully allocate a TCP/IP conversation later.
ACTION: Try the connection again later. If the failure persists, record the error values and contact your systems administrator. The return code from TCP/IP is 10060 (X'274C'). The reason for the failure may be that this host cannot reach the destination host. It may also be possible that the listening program at host 'X.X.X.X' was not running. If this is the case, perform the relevant operations to start the TCP/IP listening program, and try again.
Here is an example of how traffic data looks like when Rfhutilc refuses to connect to the queue.
As soon as according to the picture there was some code page issue we've tryed to set MQCCSID environment variable with the value 1208 and it helpled.
Also connection attempt via Rfhutilc was succeful while running under another user with login "admin" even though without setting MQCCSID variable.
But I failed to find explanation for this. Did the CCSID of the MQ client differ from system code page of what? And how could I find out default CCSID of MQ client then?
MQ client v7.5 worked just fine on the Windows Server 2012 R2 right after installing. Rfhutilc v7.5 was used both on Server 2012 and Server 2019 for testing.
I'm trying to connect to a remote queue manager via host address, but when I try to configure the connection using MQ Explorer, it comes back an error message
Reason 2009 (AMQ4059)
Anyone can help me to understand why MQ Explorer gives me this error?
I create a queue manager like QMTEST in IBM WebSphere MQ Explorer. I want to connect to a remote queue manager (remote ip address). I followed these steps:
add remote Queue manager
Queue manager name: QMTEST [Next]
Host Name or ip Address: X.X.X.X(remote ip) [Finish]
But I couldn't connect. I got this error message 'Could not establish connection to the queue manager-reason 2538.(AMQ4059)'. What can I do?
The four digit number in your error message is an MQRC (MQ Reason Code). This number gives you more information about what went wrong. You can look it up in Knowledge Center.
MQRC_HOST_NOT_AVAILABLE (2538)
There is a list of possible things that could cause this error. My guess is it is likely to be the first one, you have not started a listener on the queue manager, since you do not mention doing that in your question details.
You should also read the following link which is some basic details on how to connect to a remote queue manager. You appear to have the MQ Explorer side sorted, but perhaps not the queue manager side.
Setting up the server using the command line
Please ensure the listener is running on the remote queue manager side. The default MQ listener port is 1414. If the listener is running then check the queue manager error logs for any connection errors from the MQ explorer.
Are you sure the qmgr and its listener are running and that you have a SYSTEM.ADMIN.SVRCONN channel? That is the server-connection channel used for remote administration of a queue manager. This technote may be helpful.
Is this on a modern Windows or Linux server? If so, did you open the port (i.e. 1414) in the firewall?
Sometimes when we create a Queue manager remote administration objects are not created that's why we get such errors because it is unable to find these objects. To create them right click on the queue Manager, Select Remote Administration objects and create them and start the listener.
I experienced this same error and the queue was configured correctly.
I was using Eclipse and switched to the MQ Explorer setup available from IBM web page.
After that, I was totally able to see the queues and everything I was supposed to see.
I am using IBM Websphere MQ 7.5 in Unix system. I have installed the client on my machine and server is running on other machine. I am observing a scenario where I am able to communicate with server when running my JMS application via 'mqm' user but facing below mentioned error when using other user.
But I am able to run 'amqsputc' and 'amqsgetc' command and communicate with the server with mqm as well as other user also. I have followed all steps mentioned http://www-01.ibm.com/support/knowledgecenter/SSFKSJ_7.5.0/com.ibm.mq.ins.doc/q009300_.htm?lang=en
Exception:
com.ibm.msg.client.jms.DetailedJMSSecurityException: JMSWMQ2013: The security authentication was not valid that was supplied for QueueManager 'TestManager' with connection mode 'Client' and host name 'x.x.x.x(9923)'.
Please check if the supplied username and password are correct on the QueueManager to which you are connecting.
at com.ibm.msg.client.wmq.common.internal.Reason.reasonToException(Reason.java:521)
at com.ibm.msg.client.wmq.common.internal.Reason.createException(Reason.java:221)
at com.ibm.msg.client.wmq.internal.WMQConnection.<init>(WMQConnection.java:426)
at com.ibm.msg.client.wmq.factories.WMQConnectionFactory.createV7ProviderConnection(WMQConnectionFactory.java:6902)
at com.ibm.msg.client.wmq.factories.WMQConnectionFactory.createProviderConnection(WMQConnectionFactory.java:6277)
at com.ibm.msg.client.jms.admin.JmsConnectionFactoryImpl.createConnection(JmsConnectionFactoryImpl.java:285)
at com.ibm.mq.jms.MQConnectionFactory.createCommonConnection(MQConnectionFactory.java:6233)
at com.ibm.mq.jms.MQQueueConnectionFactory.createQueueConnection(MQQueueConnectionFactory.java:120)
at com.ibm.mq.jms.MQQueueConnectionFactory.createConnection(MQQueueConnectionFactory.java:203)
at performance.IBMMQTestProducer.start(IBMMQTestProducer.java:142)
at performance.IBMMQTestProducer.main(IBMMQTestProducer.java:177)
Caused by: com.ibm.mq.MQException: JMSCMQ0001: WebSphere MQ call failed with compcode '2' ('MQCC_FAILED') reason '2035' ('MQRC_NOT_AUTHORIZED').**
at com.ibm.msg.client.wmq.common.internal.Reason.createException(Reason.java:209)
... 9 more
Caused by: com.ibm.mq.jmqi.JmqiException: CC=2;RC=2035;AMQ9509: Program cannot open queue manager object. [1=2035,5=???]**
at com.ibm.mq.jmqi.internal.JmqiTools.getQueueManagerInfo(JmqiTools.java:783)
at com.ibm.mq.jmqi.remote.impl.RemoteSession.loadInfo(RemoteSession.java:1993)
at com.ibm.mq.jmqi.remote.impl.RemoteSession.getName(RemoteSession.java:2026)
at com.ibm.mq.jmqi.remote.api.RemoteHconn.getName(RemoteHconn.java:728)
at com.ibm.mq.ese.intercept.JmqiConnInterceptorImpl.validate(JmqiConnInterceptorImpl.java:321)
at com.ibm.mq.ese.intercept.JmqiConnInterceptorImpl.afterConnect(JmqiConnInterceptorImpl.java:226)
at com.ibm.mq.ese.intercept.JmqiConnInterceptorImpl.afterJmqiConnect(JmqiConnInterceptorImpl.java:133)
at com.ibm.mq.ese.jmqi.InterceptedJmqiImpl.jmqiConnect(InterceptedJmqiImpl.java:315)
at com.ibm.mq.ese.jmqi.ESEJMQI.jmqiConnect(ESEJMQI.java:337)
I am able to run it when I am running as myself and passing 'mqm' when starting the connection.
connection = cf.createConnection("mqm", "pswd");
I am not getting anything in manager's log. Below is the log.
------------------------------------------------------------------------------
10/30/2015 06:50:54 AM - Process(31064.1) User(mqm) Program(strmqm)
Host(x.x.x.x) Installation(Installation1)
VRMF(7.5.0.2)
AMQ7125: There are 83 days left in the trial period for this copy of WebSphere
MQ.
EXPLANATION:
This copy of WebSphere MQ is licensed for a limited period only.
ACTION:
None.
Given that you have told us that you have successfully connected and run the amqsgetc and amqsputc client samples using the same server-connection channel as you are attempting to use for your JMS program that suggests that this is not a connection time problem, in other words the MQCONN to the queue manager has been successful and something following that is failing. We know that you can MQPUT and MQGET (since that is what the aforementioned samples do).
Something that JMS does that those simple samples do not do, is an MQINQ of the queue manager. The following part of your exception makes me wonder if that is what you are tripping over:-
Caused by: com.ibm.mq.jmqi.JmqiException: CC=2;RC=2035;
AMQ9509: Program cannot open queue manager object. [1=2035,5=???] at
com.ibm.mq.jmqi.internal.JmqiTools.getQueueManagerInfo(JmqiTools.java:783) at
To be completely certain you must check the queue manager AMQERR01.LOG to see what is reported there. If it is missing authorization then it will tell you there.