Copy File to Another Server Using Batch File [duplicate] - windows

I have a bat file copying files from current machine to mapped network drive (one line, xcopy command).
It works when I RDP to server. However, when I run as a scheduled task, and configure it to run under the same user I'm logged in, it doesn't work and give error 0x4.
Is there a way I can achieve this?
I also try dsynchronize and it works when I click synchronized. When I run it as service same issue.

I was able to figure it out. Following batch files works under scheduler, even as local system account:
net use m: \\server\share /U:server\user password
xcopy C:\source m: /E /Y
It maps a network drive every time and then copy to that drive

It's possible to copy files to a UNC path without mapping as a network drive.
Just try to set the UNC path in quotes.
copy * "\\server\share"
Without the quotes, i got a "syntax error" running on Windows7 command line.

I had similar issue where I wanted to copy file(s) from a server to hundreds of other servers without mapping a remote drive to my local PC. I didn't have enough drive letters to map hundreds of remote machines to my local PC! I couldn't just map the remote drive and copy.
I thought I could use copy, xcopy, or robocopy, and specify my creds to the copy command. But none of the copy commands had any options to provide credentials to remote system.
Thanks to the post above, I was able to create a small batch file where I just loop through my hosts, and keep re-using just one drive mapping for all my hosts.
Here is my batch file...
echo #off
for /F %%j in (pchostslist1.txt) do (
net use z:\\%%j\c$ /user:domain\myusername mypassword
mkdir \\%%j\c$\tmp\mynewdir
xcopy c:\anyfile.txt \\%%j\c$\tmp\mynewdir
net use z: /delete
)

I had a similar issue and instead of using net use I simply needed to store the password as part of the scheduled task. You'll notice that it says it only has access to local resources if it's ticked.

Who maps the network drive? And are you using the mapped name, instead of the underlying UNC native path? Because it sounds like the mapped drive is setup in your login script, which doesn't run if you're not logged in. So, in a scheduled task, you do have the correct credentials for the UNC path, but no mapped drive letter.

Related

net use command: delete fails due to files in use

I have a .bat file that runs overnight on our Windows server. It maps 2 network drives and does some file copying and zipping. At the end of the script, it removes the network drives. However, on occasion, the job is not completing. I review the logs and it shows that my .bat file is prompting for a confirmation on the following line due to the drive in use.
net use F: /d
It was suggested to add /y to the end of the script to handle the prompt. However, I would like to confirm that the drive truly is still not in use.
Is there a way to keep attempting to remove the drive until it is successful without prompting?

How can I mount VHDX file using powershell properly?

I'm trying to automate process of mounting a particular *.vhdx file to Windows Server 2012r2.
When I'm mounting file manualy by GUI everything works just fine. The problem occure when I'm mounting file using Mount-DiskImage Powershell CmdLet. At first glance mounting ends successfuly but when I trying to create a file inside disk V:\ (which is the mounted VHDX in my case) I got an error about lack of permissions. I was thinking that somehow it' caused by wrong owning of folders, files and the disk itself, so I run :
takeown /f V:\ /a /r /d Y
(...to reset all the permissions and grant them to Administrators.)
And what do you think? Yes. It didn't worked out. Then I checked SDDL string of V:\ in both cases of mounting VHDX (manually and with Powershell CmdLet) and it's turned out that they are absolutly the same (O:BAG:DUD:AI(A;ID;FA;;;WD)(A;ID;FA;;;BA)).
I can't find any reason why two of this methods give me different results. And I also can't find any visible difference in any properties of disk V:\ .
Do you have any suggestions? Any ideas would be helpfull!
Thanks in advance for your time guys.

Script to remap current network drive?

We need to disconnect and re-map a network drive on Windows 7, using a set of scripts (or an app) that runs off the same network path.
That is, I need something that loads itself into RAM before it runs, so it continues to run after the drive is disconnected.
Any ideas?
Please note that 16-bit apps are NOT supported in 64 bit systems (this explains why the Novell utility failed).
You would need a vbs file running throughout a logon session to remap drives if it's disconnected by user. Need to make this script to run when domain user logs on - e.g. Logon Script in AD or GPO. There are many ways to do it.
You could even disable "Remove Network drives" feature from Explorer GUI via GPO or Reg key (net use command still works).
Or you can tweak solution by Julius for this SO question to fit your need. But consider performance impact of the vbs - only check every n minute(s) in an infinite loop.
We do something similar. We have a batch file on the network that maps the drives a user needs. We update the batch file from time to time, and users run it from a shortcut that we've placed on their desktop:
C:\WINDOWS\system32\cmd.exe /c (#echo off&if not exist \\172.x.x.x\Login (echo Unable to access server&pause) else (md c:\TMP > NUL 2>&1 &copy \\172.x.x.x\Login\MapDrives.bat C:\TMP /y > NUL 2>&1 &call C:\TMP\MapDrives.bat&del C:\TMP\MapDrives.bat&rd c:\TMP))
You can see that it checks to see if they can access the server, and if they can, it creates a folder C:\TMP, copies the MapDrives.bat file locally, then runs it. Since it is running locally, it can remap network drives without terminating it own execution. And we can update the batch file on the server without pushing it to each user's computer.
If you don't want to create a shortcut with the long command line above, it might work to create a second batch file on the server (e.g., RunMe.bat) that users run from the server. You could place all of the code from the shortcut in the RunMe.bat and accomplish the same thing. Of course, you'd want to add one more line of code to change to the local drive (so Windows doesn't hold open a handle to the network drive). Something like this:
#echo off
C:
if not exist \\172.x.x.x\Login\MapDrives.bat (
echo Unable to access server
pause
) else (
md c:\TMP > NUL 2>&1
copy \\172.x.x.x1\Login\MapDrives.bat C:\TMP /y > NUL 2>&1
C:\TMP\MapDrives.bat
)
I kept the if not exist ... because you might place the RunMe.bat in a different location than the MapDrives.bat, so it still makes sense to verify the user can access the file. Because I didn't use call C:\TMP\MapDrives.bat, it transfers control to the local batch file and any handles to the server should be closed so the drive can be remapped. This means however, that you cannot place more commands after the C:\TMP\MapDrives.bat command.

Can't copy files to UNC Destinations if BAT file is called via scheduled task

I have a bat file copying files from current machine to mapped network drive (one line, xcopy command).
It works when I RDP to server. However, when I run as a scheduled task, and configure it to run under the same user I'm logged in, it doesn't work and give error 0x4.
Is there a way I can achieve this?
I also try dsynchronize and it works when I click synchronized. When I run it as service same issue.
I was able to figure it out. Following batch files works under scheduler, even as local system account:
net use m: \\server\share /U:server\user password
xcopy C:\source m: /E /Y
It maps a network drive every time and then copy to that drive
It's possible to copy files to a UNC path without mapping as a network drive.
Just try to set the UNC path in quotes.
copy * "\\server\share"
Without the quotes, i got a "syntax error" running on Windows7 command line.
I had similar issue where I wanted to copy file(s) from a server to hundreds of other servers without mapping a remote drive to my local PC. I didn't have enough drive letters to map hundreds of remote machines to my local PC! I couldn't just map the remote drive and copy.
I thought I could use copy, xcopy, or robocopy, and specify my creds to the copy command. But none of the copy commands had any options to provide credentials to remote system.
Thanks to the post above, I was able to create a small batch file where I just loop through my hosts, and keep re-using just one drive mapping for all my hosts.
Here is my batch file...
echo #off
for /F %%j in (pchostslist1.txt) do (
net use z:\\%%j\c$ /user:domain\myusername mypassword
mkdir \\%%j\c$\tmp\mynewdir
xcopy c:\anyfile.txt \\%%j\c$\tmp\mynewdir
net use z: /delete
)
I had a similar issue and instead of using net use I simply needed to store the password as part of the scheduled task. You'll notice that it says it only has access to local resources if it's ticked.
Who maps the network drive? And are you using the mapped name, instead of the underlying UNC native path? Because it sounds like the mapped drive is setup in your login script, which doesn't run if you're not logged in. So, in a scheduled task, you do have the correct credentials for the UNC path, but no mapped drive letter.

How to run batch file from network share without "UNC path are not supported" message?

I am trying to run a batch file from a network share, but I keep getting the following message: "UNC path are not supported. Defaulting to Windows directory." The batch file is located on \\Server\Soft\WPX5\install.bat. While logged in as administrator, from my Windows 7 Desktop, I navigate to \\Server\Soft\WP15\ and double click on install.bat, that's when I get the "UNC path are not supported." message. I found some suggestions online stating that mapping drive will not work, but using a symbolic link will solve this issue, but the symbolic link didn't work for me. Below is my batch file content, I would appreciate any assistance that can help me accomplish what I am trying to do. Basically, I want to be able to run the batch file from \\Server\Soft\WP15\install.bat.
Batch file content
mklink /d %userprofile%\Desktop\WP15 \\server\soft\WP15
\\server\soft\WP15\setup.exe
robocopy.exe "\\server\soft\WP15\Custom" /copyall "C:\Program Files (x86)\WP\Custom Templates"
Regedit.exe /s \\server\soft\WPX5\Custom\Migrate.reg
Also, how do I remove the symbolic link after the install is completed?
PUSHD and POPD should help in your case.
#echo off
:: Create a temporary drive letter mapped to your UNC root location
:: and effectively CD to that location
pushd \\server\soft
:: Do your work
WP15\setup.exe
robocopy.exe "WP15\Custom" /copyall "C:\Program Files (x86)\WP\Custom Templates"
Regedit.exe /s WPX5\Custom\Migrate.reg
:: Remove the temporary drive letter and return to your original location
popd
Type PUSHD /? from the command line for more information.
I feel cls is the best answer. It hides the UNC message before anyone can see it. I combined it with a #pushd %~dp0 right after so that it would seem like opening the script and map the location in one step, thus preventing further UNC issues.
cls
#pushd %~dp0
:::::::::::::::::::
:: your script code here
:::::::::::::::::::
#popd
Notes:
pushd will change your working directory to the scripts location in the new mapped drive.
popd at the end, to clean up the mapped drive.
There's a registry setting to avoid this security check (use it at your own risks, though):
Under the registry path
HKEY_CURRENT_USER
\Software
\Microsoft
\Command Processor
add the value DisableUNCCheck REG_DWORD and set the value to 0 x 1
(Hex).
Note:
On Windows 10 version 1803, the setting seems to be located under HKLM:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Command Processor
Basically, you can't run it from a UNC path without seeing that message.
What I usually do is just put a CLS at the top of the script so I don't have to see that message. Then, specify the full path to files in the network share that you need to use.
I needed to be able to just Windows Explorer browse through the server share, then double-click launch the batch file. #dbenham led me to an easier solution for my scenario (without the popd worries):
:: Capture UNC or mapped-drive path script was launched from
set NetPath=%~dp0
:: Assumes that setup.exe is in the same UNC path
%NetPath%setup.exe
:: Note that NetPath has a trailing backslash ("\")
robocopy.exe "%NetPath%Custom" /copyall "C:\Program Files (x86)\WP\Custom Templates"
Regedit.exe /s %NetPath%..\WPX5\Custom\Migrate.reg
:: I am not sure if WPX5 was typo, so use ".." for parent directory
set NetPath=
pause
Instead of launching the batch directly from explorer - create a shortcut to the batch and set the starting directory in the properties of the shortcut to a local path like %TEMP% or something.
To delete the symbolic link, use the rmdir command.
I ran into the same issue recently working with a batch file on a network share drive in Windows 7.
Another way that worked for me was to map the server to a drive through Windows Explorer: Tools -> Map network drive. Give it a drive letter and folder path to \yourserver. Since I work with the network share often mapping to it makes it more convenient, and it resolved the “UNC path are not supported” error.
My situation is just a little different. I'm running a batch file on startup to distribute the latest version of internal business applications.
In this situation I'm using the Windows Registry Run Key with the following string
cmd /c copy \\serverName\SharedFolder\startup7.bat %USERPROFILE% & %USERPROFILE%\startup7.bat
This runs two commands on startup in the correct sequence. First copying the batch file locally to a directory the user has permission to. Then executing the same batch file. I can create a local directory c:\InternalApps and copy all of the files from the network.
This is probably too late to solve the original poster's question but it may help someone else.
This is the RegKey I used:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Command Processor]
"DisableUNCCheck"=dword:00000001
My env windows10 2019 lts version and I add this two binray data ,fix this error
Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Command Processor DisableUNCCheck value 1
Computer\HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Microsoft\Command Processor
DisableUNCCheck value 1
This is a very old thread, but I still use Windows 7. :-)
There is one point that no one seems to have taken into account, which probably would help Windows 10 users also.
If Command Extensions are enabled, the PUSHD command accepts network paths in addition to the normal drive letter and path.
So the obvious - and simplest - answer might be to enable command extensions in the batch script, if you intend to use PUSHD. At the very least, this ought to reduce the problems you might have in using PUSHD wqith a network path.
I stumbled upon this question while searching for a solution to a specific problem. I needed to make a batch script that sits in a network folder (UNC path) with a Python script. The goal was to be able to double click on the batch script and have it run the Python script:
with the network folder containing the script as the working directory,
without modifications to the Python script (no command line parameters or hard-coded paths).
without creating another Python file.
The pushd and popd solutions were unsatisfactory. They work, but if the user were to get in the habit of forcefully terminating the script while it was running, they would end up with a bunch of mapped drives in My Computer since popd wasn't run.
I start by using cls to clear the UNC path error. I then assign the path containing the batch script to a variable. I slice the path to remove the trailing backslash (otherwise, Python throws a SyntaxError). Finally, I run a couple Python commands inside the batch file that change the working directory and execute the target script:
cls
#echo off
set pyfile=myscript.py
set batchdir=%~dp0
set wdir=%batchdir:~0,-1%
python -c "import os; import runpy; os.chdir(r""%wdir%""); runpy.run_path(r""%pyfile%"")"
pause
Editing Windows registries is not worth it and not safe, use Map network drive and load the network share as if it's loaded from one of your local drives.

Resources