I have a problem about running sh file in Intellij in Windows.
When I clicked the run button in the file, I got this output shown below.
PS C:\Users\username\IdeaProjects\library> /bin/sh C:/Users/username/IdeaProjects/library/aws-setup.sh
/bin/sh : The term '/bin/sh' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify t
hat the path is correct and try again.
At line:1 char:1
+ /bin/sh C:/Users/username/IdeaProjects/library/aws-setup.sh
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (/bin/sh:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
How can I fix it?
Set Settings (Preferences on macOS) | Tools | Terminal | Shell path to c:\Program Files\Git\bin\bash.exe or use Shell Script run configuration with Interpreter path set to bash.exe:
Related
I downloaded sass in my terminal. It is running successfully, but when i check the version it shows an error like:
The term 'saas' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or
if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ saas -v
+ ~~~~
+ CategoryInfo : ObjectNotFound: (saas:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
I am trying to run an executable from inside of a container from Power Shell and get an error message that it could not be found. However I've confirmed its directory is in Path and the executable is where I expect it to be. What am I missing?
PS C:\work\some_project> docker run -it --rm --name="iar_build" iar_env
Windows PowerShell
Copyright (C) Microsoft Corporation. All rights reserved.
Try the new cross-platform PowerShell https://aka.ms/pscore6
PS C:\docker_work> IarBuild.exe
IarBuild.exe : The term 'IarBuild.exe' is not recognized as the name of a cmdlet, function, script file, or operable
program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ IarBuild.exe
+ ~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (IarBuild.exe:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\docker_work> $Env:Path
C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Windows\System32\
OpenSSH\;C:\Users\ContainerAdministrator\AppData\Local\Microsoft\WindowsApps;C:\Program Files (x86)\IAR Systems\Embedded
Workbench 8.1\common\bin"
PS C:\docker_work> ls 'C:\Program Files (x86)\IAR Systems\Embedded Workbench 8.1\common\bin\IarBuild.exe'
Directory: C:\Program Files (x86)\IAR Systems\Embedded Workbench 8.1\common\bin
Mode LastWriteTime Length Name
---- ------------- ------ ----
-a---- 9/1/2018 4:09 AM 724992 IarBuild.exe
PS C:\docker_work>
My docker file contains the following:
...
# Add the IAR common\bin\ folder to the image's PATH
RUN setx path \
"%path%;C:\Program Files (x86)\IAR Systems\Embedded Workbench 8.1\common\bin\"
...
CMD [ "powershell.exe", "-executionpolicy" , "Unrestricted" ]
You will need to add a .\ so it will look like .\IarBuild.exe as it is currently trying to process the .exe as a cmdlet
Edit: If you start to type the name of the exe and press Tab it will autocomplete to .\IarBuild.exe if not type in manually
Hope that helps
This is the exact error on the cmd window.
this is the command I typed to be executed in the cmd
F:\Fast R-CNN\Cognitive tool kit\cntk\Scripts\install\windows>install.bat
CNTK Binary Install Script
F:\Fast : The term 'F:\Fast' is not recognized as the name of a cmdlet,
function, script file, or operable program. Check the spelling of the name, or
if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ F:\Fast R-CNN\Cognitive tool kit\cntk\Scripts\install\windows\ps\inst ...
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (F:\Fast:String) [], CommandNotF
oundException
+ FullyQualifiedErrorId : CommandNotFoundException
Error during install operation
I've tried running as admin, direct clicking, changing the path etc. Kindly tell me a way to run this file. It's a batch file for a series of installations for the Microsoft cognitive tool kit.
Looks like you need to enclose the path in quotes
"F:\Fast R-CNN\Cognitive tool kit\cntk\Scripts\install\windows\install.bat"
use "start" before the filename.
Example:
F:\Fast R-CNN\Cognitive tool kit\cntk\Scripts\install\windows>start install.bat
The term 'jmeter' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
jmeter -n -t D:\apache-jmeter-2.13\apache-jmeter-
2.13\bin\zzz\zzz ...
~~~~~~
CategoryInfo : ObjectNotFound: (jmeter:String) [], CommandNotFoundException
FullyQualifiedErrorId : CommandNotFoundException
Use 'cmd' instead of the Powershell console. Also may sure that you have Jmeter(folder installation)\bin in your PATH environment variable.
If you are on Windows 10 and using Windows PowerShell make sure you are inside JMeter's bin folder and start your command with .\jmeter instead of only jmeter.
.\jmeter -n -t D:\apache-jmeter-2.13\apache-jmeter- 2.13\bin\zzz\zzz ...
I was using PowerShell normally (was using posh git, just to mention), and suddenly a weird behavior happened, I tried to restart the session, when I did, I got many errors, which are :
Split-Path : The term 'Split-Path' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path
was included, verify that the path is correct and try again.
At C:\Users\aymen.daoudi\Documents\WindowsPowerShell\Modules\posh-git\profile.example.ps1:1 char:16
+ Push-Location (Split-Path -Path $MyInvocation.MyCommand.Definition -P ...
+ ~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (Split-Path:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
Import-Module : The specified module '.\posh-git' was not loaded because no valid module file was found in any module directory.
At C:\Users\aymen.daoudi\Documents\WindowsPowerShell\Modules\posh-git\profile.example.ps1:4 char:1
+ Import-Module .\posh-git
+ ~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ResourceUnavailable: (.\posh-git:String) [Import-Module], FileNotFoundException
+ FullyQualifiedErrorId : Modules_ModuleNotFound,Microsoft.PowerShell.Commands.ImportModuleCommand
Enable-GitColors : The term 'Enable-GitColors' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or
if a path was included, verify that the path is correct and try again.
At C:\Users\aymen.daoudi\Documents\WindowsPowerShell\Modules\posh-git\profile.example.ps1:26 char:1
+ Enable-GitColors
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (Enable-GitColors:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
Pop-Location : The term 'Pop-Location' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a
path was included, verify that the path is correct and try again.
At C:\Users\aymen.daoudi\Documents\WindowsPowerShell\Modules\posh-git\profile.example.ps1:28 char:1
+ Pop-Location
+ ~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (Pop-Location:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
Start-SshAgent : The term 'Start-SshAgent' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if
a path was included, verify that the path is correct and try again.
At C:\Users\aymen.daoudi\Documents\WindowsPowerShell\Modules\posh-git\profile.example.ps1:30 char:1
+ Start-SshAgent -Quiet
+ ~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (Start-SshAgent:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
Here's a picture of that :
I tried to restart the PC, but still have the same problem every time I start a new PowerShell session, I noticed that many commands don't work, what caused this problem ? and what should I do to solve it ?
Update
I removed the profiles added by PoshGit, when starting a new session, I don't have any error, but powershell still doesn't recognize commands, for example calling Clear-host, throws lots of errors that I can't understand the cause !
You're PSModulePath system environment varaible is missing C:\windows\system32\WindowsPowerShell\v1.0\Modules which is the location of all "system"/built-in modules in PowerShell.
Something you've installed (posh git maybe?) has probably messed it up. Add it to the system variable.
The easiest way to do it without PowerShell is using the GUI as described here:
http://www.computerhope.com/issues/ch000549.htm
If you just installed posh-git it added some Powershell profile files, basically some .ps1 files executed each time a powershell session starts.
Just remove (or fix) them; from the path in the errors thrown probably they are in C:\Users\aymen.daoudi\Documents\WindowsPowerShell\...
I had a similar shell error message when loading my profile after installing posh-git ... profile.example.ps1 is not recognized as the name of a cmdlet.
This happened to me when I copied over files to my user directory from an older machine - the older poshgit powershell user profiles came along with it.
The fix for me was to rename the old posh-git profile from the path below...
Original Profile Path
C:\Users\<username>\Documents\WindowsPowerShell\Microsoft.PowerShell_profile.ps1
New Profile Name
C:\Users\<username>\Documents\WindowsPowerShell\Microsoft.PowerShell_profile.ps1.notused
After choco uninstall poshgit and choco install poshgit a new profile was created with the right data (went from 5KB to 1KB in size).