I use ag to select filenames and pipe them into fzy with the following script
set "$(ag -g "\.gz$" archives/ | fzy )"
echo "selected file: $1"
How can I run a function on all files in the folder archives , so only files in are selected, that are newer than already existing files with the same name the folder itp-files/? and pipe only those into fzy then?
I tried something like
for f in $(ag --nonumbers -g "\.gz$" archives/); do
echo do something with $f and only output if file is older than the same in itp-files/;
done | fzy
But I am not sure how to compare the filetimes ike this
I tried something like
for f in $(ag --nonumbers -g "\.gz$" archives/); do
echo do something with $f and only output if file is older than the same in tmp/;
done | fzy
But I am not sure how to compare the filetimes ike this
If you like your construction for ... in ... with ag, you may compare timestamps like this:
for f in $(ag --nonumbers -g "\.gz$" archives/); do
fn=$(basename $f)
if [ $f -ot tmp/$fn ]; then
fzy $f
fi
done
Ajust full path of tmp folder, if needed.
-ot means "older than".
Narrowed solution (to provide a list of newline-separated items for fzy):
find archives -iname "*.gz" -type f -printf "%f\n" | \
xargs -I '{}' find itp-files -name '{}' -type f -newer '{}' -printf "%f\n" | \
sort | \
fzy
You can use the xargs command to run a command on each line of output.
For example: find . -name '*.bak' -type f -print | xargs rm -r will remove all files that end in .bak
I believe you need the find -exec approach, something like:
find /directory -name "*.gz" -mtime +5 -exec ag -g {} \; | fzy
This means:
Search within the /directory
The name of the file needs to end with .gz (file extension)
The last modification date needs to be older than 5 days (can be altered according to your wishes)
-exec ag -g {} : executed the ag command, using the -g switch, on the find result ({}).
\; ends the -exec part.
You can launch the fzy command on the results.
Feel free to add comments in case you have doubts.
Related
I would like to recursively go through all subdirectories and remove the oldest two PDFs in each subfolder named "bak":
Works:
find . -type d -name "bak" \
-exec bash -c "cd '{}' && pwd" \;
Does not work, as the double quotes are already in use:
find . -type d -name "bak" \
-exec bash -c "cd '{}' && rm "$(ls -t *.pdf | tail -2)"" \;
Any solution to the double quote conundrum?
In a double quoted string you can use backslashes to escape other double quotes, e.g.
find ... "rm \"\$(...)\""
If that is too convoluted use variables:
cmd='$(...)'
find ... "rm $cmd"
However, I think your find -exec has more problems than that.
Using {} inside the command string "cd '{}' ..." is risky. If there is a ' inside the file name things will break and might execcute unexpected commands.
$() will be expanded by bash before find even runs. So ls -t *.pdf | tail -2 will only be executed once in the top directory . instead of once for each found directory. rm will (try to) delete the same file for each found directory.
rm "$(ls -t *.pdf | tail -2)" will not work if ls lists more than one file. Because of the quotes both files would be listed in one argument. Therefore, rm would try to delete one file with the name first.pdf\nsecond.pdf.
I'd suggest
cmd='cd "$1" && ls -t *.pdf | tail -n2 | sed "s/./\\\\&/g" | xargs rm'
find . -type d -name bak -exec bash -c "$cmd" -- {} \;
You have a more fundamental problem; because you are using the weaker double quotes around the entire script, the $(...) command substitution will be interpreted by the shell which parses the find command, not by the bash shell you are starting, which will only receive a static string containing the result from the command substitution.
If you switch to single quotes around the script, you get most of it right; but that would still fail if the file name you find contains a double quote (just like your attempt would fail for file names with single quotes). The proper fix is to pass the matching files as command-line arguments to the bash subprocess.
But a better fix still is to use -execdir so that you don't have to pass the directory name to the subshell at all:
find . -type d -name "bak" \
-execdir bash -c 'ls -t *.pdf | tail -2 | xargs -r rm' \;
This could stll fail in funny ways because you are parsing ls which is inherently buggy.
You are explicitely asking for find -exec. Usually I would just concatenate find -exec find -delete but in your case only two files should be deleted. Therefore the only method is running subshell. Socowi already gave nice solution, however if your file names do not contain tabulator or newlines, another workaround is find while read loop.
This will sort files by mtime
find . -type d -iname 'bak' | \
while read -r dir;
do
find "$dir" -maxdepth 1 -type f -iname '*.pdf' -printf "%T+\t%p\n" | \
sort | head -n2 | \
cut -f2- | \
while read -r file;
do
rm "$file";
done;
done;
The above find while read loop as "one-liner"
find . -type d -iname 'bak' | while read -r dir; do find "$dir" -maxdepth 1 -type f -iname '*.pdf' -printf "%T+\t%p\n" | sort | head -n2 | cut -f2- | while read -r file; do rm "$file"; done; done;
find while read loop can also handle NUL terminated file names. However head can not handle this, so I did improve other answers and made it work with nontrivial file names (only GNU + bash)
replace 'realpath' with rm
#!/bin/bash
rm_old () {
find "$1" -maxdepth 1 -type f -iname \*.$2 -printf "%T+\t%p\0" | sort -z | sed -zn 's,\S*\t\(.*\),\1,p' | grep -zim$3 \.$2$ | xargs -0r realpath
}
export -f rm_old
find -type d -iname bak -execdir bash -c 'rm_old "{}" pdf 2' \;
However bash -c might still exploitable, to make it more secure let stat %N do the quoting
#!/bin/bash
rm_old () {
local dir="$1"
# we don't like eval
# eval "dir=$dir"
# this works like eval
dir="${dir#?}"
dir="${dir%?}"
dir="${dir//"'$'\t''"/$'\011'}"
dir="${dir//"'$'\n''"/$'\012'}"
dir="${dir//$'\047'\\$'\047'$'\047'/$'\047'}"
find "$dir" -maxdepth 1 -type f -iname \*.$2 -printf '%T+\t%p\0' | sort -z | sed -zn 's,\S*\t\(.*\),\1,p' | grep -zim$3 \.$2$ | xargs -0r realpath
}
find -type d -iname bak -exec stat -c'%N' {} + | while read -r dir; do rm_old "$dir" pdf 2; done
I would like to rename several files picked by find in some directory, then use xargs and mv to rename the files, with parameter expansion. However, it did not work...
example:
mkdir test
touch abc.txt
touch def.txt
find . -type f -print0 | \
xargs -I {} -n 1 -0 mv {} "${{}/.txt/.tx}"
Result:
bad substitution
[1] 134 broken pipe find . -type f -print0
Working Solution:
for i in ./*.txt ; do mv "$i" "${i/.txt/.tx}" ; done
Although I finally got a way to fix the problem, I still want to know why the first find + xargs way doesn't work, since I don't think the second way is very general for similar tasks.
Thanks!
Remember that shell variable substitution happens before your command runs. So when you run:
find . -type f -print0 | \
xargs -I {} -n 1 -0 mv {} "${{}/.txt/.tx}"
The shell tries to expan that ${...} construct before xargs even
runs...and since that contents of that expression aren't a valid shell variable reference, you get an error. A better solution would be to use the rename command:
find . -type f -print0 | \
xargs -I {} -0 rename .txt .tx {}
And since rename can operate on multiple files, you can simplify
that to:
find . -type f -print0 | \
xargs -0 rename .txt .tx
I'm new(ish) to using Bash and I'm trying to figure out how to combine a few different things into one script.
I'm looking for file transfers that were interrupted. These folders contain image files (either jpgs or pngs), but are missing another specific file (finished.txt).
Here is what I'm using to find folders with images (from here):
for f in */incoming/ ; do
log_f="${f//\//}"
echo "searching $f"
find "$f" -iname "*jpg*" -o -iname "*png*" > "/output/${log_f}.txt"
echo "$f finished"
done
Then, I'm running this command to find folders that are missing the finished.txt file (from here):
find -mindepth 2 -maxdepth 2 -type d '!' -exec test -e "{}/finished.txt" ';' -print
Is there a way to combine them so I have a list of folders which have jpg or png files, but don't have finished.txt? Also, If I want to add -mtime, where do I put that?
Alternatively, if there's a better/faster way to do this, I'm interested in that too.
Thanks!
From the first pass when you get the files with jpg/png you can get the directory by using dirname. The list of directories can then be used for iterating over and looking for finished.txt file. On finding you can skip the directory if not print it out.
Something as below should do the needful
for i in `find "$f" -iname "*jpg*" -o -iname "*png*" -exec dirname {} \;`
do
ls $i | grep finished >/dev/null
if [ $? -eq 1 ]; then
echo $i
fi
done
Add " | sort | uniq" at the end of find command to perhaps remove the duplicates. Something like
find "$f" -iname "jpg" -o -iname "png" -exec dirname {} \; | sort | uniq
I have a task where I need to move a bunch of files from one directory to another. I need move all files with the same file name (i.e. blah.pdf, blah.txt, blah.html, etc...) at the same time, and I can move a set of these every four minutes. I had a short bash script to just move a single file at a time at these intervals, but the new name requirement is throwing me off.
My old script is:
find ./ -maxdepth 1 -type f | while read line; do mv "$line" ~/target_dir/; echo "$line"; sleep 240; done
For the new script, I basically just need to replace find ./ -maxdepth 1 -type f
with a list of unique file names without their extensions. I can then just replace do mv "$line" ~/target_dir/; with do mv "$line*" ~/target_dir/;.
So, with all of that said. What's a good way to get a unique list of files without their file names with bash script? I was thinking about using a regex to grab file names and then throwing them in a hash to get uniqueness, but I'm hoping there's an easier/better/quicker way. Ideas?
A weird-named files tolerant one-liner could be:
find . -maxdepth 1 -type f -and -iname 'blah*' -print0 | xargs -0 -I {} mv {} ~/target/dir
If the files can start with multiple prefixes, you can use logic operators in find. For example, to move blah.* and foo.*, use:
find . -maxdepth 1 -type f -and \( -iname 'blah.*' -or -iname 'foo.*' \) -print0 | xargs -0 -I {} mv {} ~/target/dir
EDIT
Updated after comment.
Here's how I'd do it:
find ./ -type f -printf '%f\n' | sed 's/\..*//' | sort | uniq | ( while read filename ; do find . -type f -iname "$filename"'*' -exec mv {} /dest/dir \; ; sleep 240; done )
Perhaps it needs some explaination:
find ./ -type f -printf '%f\n': find all files and print just their name, followed by a newline. If you don't want to look in subdirectories, this can be substituted by a simple ls;
sed 's/\..*//': strip the file extension by removing everything after the first dot. Both foo.tar ad foo.tar.gz are transformed into foo;
sort | unique: sort the filenames just found and remove duplicates;
(: open a subshell:
while read filename: read a line and put it into the $filename variable;
find . -type f -iname "$filename"'*' -exec mv {} /dest/dir \;: find in the current directory (find .) all the files (-type f) whose name starts with the value in filename (-iname "$filename"'*', this works also for files containing whitespaces in their name) and execute the mv command on each one (-exec mv {} /dest/dir \;)
sleep 240: sleep
): end of subshell.
Add -maxdepth 1 as argument to find as you see fit for your requirements.
Nevermind, I'm dumb. there's a uniq command. Duh. New working script is: find ./ -maxdepth 1 -type f | sed -e 's/.[a-zA-Z]*$//' | uniq | while read line; do mv "$line*" ~/target_dir/; echo "$line"; sleep 240; done
EDIT: Forgot close tag on code and a backslash.
I want to copy files found by find (with exec cp option) but, i'd like to change name of those files - e.g find ... -exec cp '{}' test_path/"test_"'{}' , which to my test_path should copy all files found by find but with prefix 'test'. but it ain't work.
I'd be glad if anyone could give me some ideas how to do it.
best regards
for i in `find . -name "FILES.EXT"`; do cp $i test_path/test_`basename $i`; done
It is assumed that you are in the directory that has the files to be copied and test_path is a subdir of it.
if you have Bash 4.0 and assuming you are find txt files
cd /path
for file in ./**/*.txt
do
echo cp "$file" "/test_path/test${file}"
done
of with GNU find
find /path -type f -iname "*.txt" | while read -r -d"" FILE
do
cp "$FILE" "test_${FILE}"
done
OR another version of GNU find+bash
find /path -type f -name "*txt" -printf "cp '%p' '/tmp/test_%f'\n" | bash
OR this ugly one if you don't have GNU find
$ find /path -name '*.txt' -type f -exec basename {} \; | xargs -I file echo cp /path/file /destination/test_file
You should put the entire test_path/"test_"'{}' in ""
Like:
find ... -exec cp "{}" "test_path/test_{}" \;
I would break it up a bit, like this;
for line in `find /tmp -type f`; do FULL=$line; name=`echo $line|rev|cut -d / -f -1|rev` ; echo cp $FULL "new/location/test_$name" ;done
Here's the output;
cp /tmp/gcc.version new/location/test_gcc.version
cp /tmp/gcc.version2 new/location/test_gcc.version2
Naturally remove the echo from the last part, so it's not just echo'ng what it woudl of done and running cp