I am currently using vs2022 community. But I need to use wdk 2004H.21H2 Build driver win10 cannot be loaded. I want to be able to install and use wdk 2004H on 2022.I have tried installing "WDK for Windows 10 version 2004" directly.sdk version selection 19041 build fails.
How can vs2022 use the 2019 WDK?
I have tried installing "WDK for Windows 10 version 2004" directly.sdk version selection 19041 build fails.
Related
I have three versions of .NET Core installed on my machine:
However, both VS2017 and VS 2019 return the following error when I execute dotnet --version command:
PM> dotnet --version
dotnet : Did you mean to run dotnet SDK commands? Please install dotnet SDK from:
I can create a solution targeting .NET Core but when I create a Console App targeting .NET Core, for example, the Debug button is labeled Attach instead of Start as usual, and Start Debugging and Start Without Debugging commands in the Debug menu are disabled.
What I tried so far:
Added "C:\ProgramFiles\dotnet" to system PATH variable.
Modified VS2019 using VS Installer.
Restarted several times.
I did have several other version of .NET Core but uninstalled them since I had no solutions targeting these versions and wanted to clean up.
I only left 2.2.300 and 3.0.100 and when I used VS Installer to modify VS2019 it added SDK 2.1.700.
Any ideas on how to resolve this issue without completely removing Visual Studio and installing from scratch?
Apparently x86 version(s) of .NET Core SDKs must be installed as well. After installing 3.0.100 x86 dotnet --version command works fine and I can build and debug .NET Core projects...
I'm running Visual Studio 2015 Update 3, On Windows 10 Professional. I just installed the latest version of Windows SDK. I'm trying to compile a VC++ Console Application, very simple, but I cannot compile it because I get this error:
LINK: fatal error LNK1158: cannot run 'rc.exe'
I tried googling and I came up with this QandA but I can't find any rc.exe and rcdll.exe in my /kits/10/bin folder! Where could the problem lie?
If it matters, I installed the SDK version that came with the setup, and then installed the newest Windows 10 SDK that was on this ISO file:
17763.1.180914-1434.rs5_release_WindowsSDK.iso
I have read that rc.exe is no longer included in the Windows SDK. I had installed the oldest MSVC C++ compiler in the Visual Studio 2019 installer, but it did not contain rc.exe either. I installed the newest (which is also version 14, but with a higher minor version number!) and it contains rc.exe.
I'm trying to install Aptana Studio 3 version: 3.6.1.
But this error comes up:
I have installed
The .NET Framework version 4.5.2 and Node.js.
I don't know if that will help, but I tried downloading those.
Check here , prior post, here is where I found the 10.0 ver.
Uninstall the version of node.js you currently have and install 10.
It worked for me .
Install the latest version of node.js at: http://go.aptana.com/installer_nodejs_windows
then run the aptana installer again
I used one Windows Driver samples from github (Filesys) and tried to build it on Windows 10 with Visual Studio 2015.
I have installed both:
WDK8.1 with its SDK
WDK10
But when i try to build a project i see this error message:
An SDK corresponding to WDK version '8.1' was not found. Please install the SDK before building. minispy (Filter\minispy) C:\Program Files (x86)\Windows Kits\10\build\WindowsDriver.common.targets
but SDK of 8.1 is already installed.
Is there any option in Visual studio that i could use to point it to SDK 8.1?
I had the same problem and the solution
is sdk version 10 released after VS 2015 .
You should download and install it manually. I used the following link for downloading sdk :
https://dev.windows.com/en-us/downloads/windows-10-sdk
Also see this link for help with downloading and installing sdk
http://blogs.msdn.com/b/jpwdkblog/archive/2015/08/21/windows-10.aspx
good luck
In this case, you may missed No.3.
Check following points:
Install Visual Studio 2015
Install Visual C++ (Not installed by default)
Install Windows SDK for Windows 10 (Not installed by default)
Install WDK 10 (Download separately)
Upgrade project from WDK 8.1 (for more detail: https://msdn.microsoft.com/en-us/library/windows/hardware/mt270257%28v=vs.85%29.aspx )
Currently,
Visual Studio 2015 supports WDK 10.
Visual Studio 2013 supports WDK 8.1.
In my environment, Visual Studio 2015 may not support WDK 8.1.
When build in WindowsUserModeDriver8.1 with VS2015, an error was occurred: prop is not found.
WDK 10 supports build drivers for Windows 10 / 8.1 / 8 (/ 7?).
(see also: https://msdn.microsoft.com/en-US/library/windows/hardware/dn914754%28v=vs.85%29.aspx )
To build Windows 8.1 driver, follow below.
Open project properties
Navigate to Configuration Properties > General
Check: Platform Toolset Windows****ModeDriver10.0
Navigate to Configuration Properties > Driver settings
Check: Target OS Version: Windows 8.1
Check: Target Platform: Desktop (Default: Universal)
You are likely targeting the wrong platform toolset. To build a driver for Windows 10, you need to target one of the Windows 10 platform toolset (WindowsKernelModeDriver10.0 or WindowsUserModeDriver10.0). If you want to use SDK 8.1, then you should use the WDK 8.1 platform toolsets (WindowsKernelModeDriver8.1 or WindowsUserModeDriver8.1).
You cannot use the 10.0 toolsets and try to make them point to SDK 8.1 because there were some key changes to how files are laid on disk between the two kits. Using the appropriate toolset should hopefully fix the issue!
Have you followed all the instructions during the installation of VS? https://msdn.microsoft.com/en-us/windows/hardware/dn913721.aspx
After correct installation I have handled the problem.
(Optional)
Did you install Windows 10 SDK?
Download link: https://dev.windows.com/en-us/downloads/windows-10-sdk
I have Visual Studio 2010 with SP1 and Windows sdk 7.1.
I also have VS2012 and Windows kit 8.
when i run Windows SDK 7.1 Command Prompt and run node-gyp build --msvs_version=2010 it gives me error:
error MSB3411: Could not load the Visual C++ component "VCBuild.exe".
If the component is not installed,
either 1) install the Microsoft Windows SDK for Windows Server 2008 and .NET Fr
amework 3.5, or 2) install Microsoft Visual Studio 2008.
Is it trying to find VCBuild.exe.
I found that vcbuild has been replaced with msbuild.
Is it a valid error ?
I also found that in Windows 7, for .NET 3.5, you just need to turn it on from Control Panel. I have looked at other questions on stackoverflow like here and this.
But issue is that since vcbuild.exe does not exist in system with vs2010 then why does node-gyp is searching for it ? Or am i missing something ?
How do i resolve this error ?
The following has worked for me (as of June 2014), as described in here.
Install free Visual Studio Express 2013 for Windows (not VS Express 2013 for Web)
npm install --msvs_version=2013
Otherwise, I have spent a lot of time installing old Microsoft packages and patches, and it wasn't helpful.
Setting up the VS2010 and other applications as listed at node-gyp wiki solved the problems.
On Windows XP/Vista/7, node-gyp requires Python 2.7 and Visual Studio 2010
According to the readme file in Microsoft Visual C++ 2010 Service Pack 1 Compiler Update for the Windows SDK 7.1, to ensure that your system has a supported configuration,
uninstall the following products first (if you want to save tons of time)
and then reinstall them in the order listed: (you can uninstall in any order :P)
Visual Studio 2010
Windows SDK 7.1
Visual Studio 2010 SP1
Visual C++ 2010 SP1 Compiler Update for the Windows SDK 7.1
On x64 environments, the last update in the list fixes errors about missing compilers and
error MSB4019: The imported project "C:\Microsoft.Cpp.Default.props" was not found.
The answer to all your question lies here. Struggled a lot to find this. Finally got it working. =)
Just to save you time visiting the link here is what's useful in that link.
INSTRUCTIONS:
You can install with npm:
$ npm install -g node-gyp
You will also need to install:
On Unix:
python (v2.7 recommended, v3.x.x is not supported)
make A proper C/C++ compiler toolchain, like GCC
On Windows:
Python (v2.7.3 recommended, v3.x.x is not supported)
Windows XP/Vista/7: Microsoft Visual Studio C++ 2010 (Express version
works well)
For 64-bit builds of node and native modules you will also need the Windows > 7
64-bit SDK
If the install fails,
try uninstalling any C++ 2010 x64&x86 Redistributable that you have
installed first.
If you get errors that the 64-bit compilers are not installed you may
also need the compiler update for the Windows SDK 7.1
Windows 7/8:
Microsoft Visual Studio C++ 2012/13 for Windows Desktop (Express
version works well)
If you have multiple Python versions installed,
you can identify which Python version node-gyp uses by setting the
'--python' variable:
$ node-gyp --python /path/to/python2.7
If node-gyp is called by way of npm and you have multiple versions of
Python installed, then you can set npm's 'python' config key to the
appropriate value:
$ npm config set python /path/to/executable/python2.7
This can be fixed by installing all the required tools and configurations using Microsoft's windows-build-tools using npm install --global --production windows-build-tools from an elevated cmd (run as administrator).