I am trying to set GPO company-wide for Wi-Fi , adapter settings:
property: preferred band
Value :3. Prefer 5GHz band.
Any advise would be much apprecited
Thanks
M
Related
I have two Lan card in my windows 10. one is default ethernet that is built-in with my laptop and another is USB Lan card.
I want to configure two ip with two lan card.
then how to do that things. Someone says me that i have to add persistent route. i don't have any knowledge about it.
Press WinKey+R and write ncpa.cpl.
There you will find both of your NIC.
Right click on the 1st NIC
Properties
Double click on Internet Protocol Version 4
Configure your IP and DNS under the General tab
Repeat for the 2nd NIC
We have to set ip, jumbo frame, receive buffers properties to Intel(R) Ethernet Server Adapter I350-T2 network cards (lot of them) on Windows7. Unfortunately when we do a disk image, these values are lost and we have to input all of them manually on the cloned PC for each network adapter. Is there any sdk/api to set them programmatically?
I am able to change all the advanced adapter properties using Intel® PROSet for Windows PowerShell* Software .
I need to monitor how many smart phones are connected to a wireless network in a certain area. I found out that Zigbee can be used to accomplish this task. I need to at least differentiate each phone connected. What do I need to do?
Without knowing anything in regards to Zigbee, you could use the BSSID of the device as your unique identifier. Every WiFi radio has a unique BSSID. Just a thought.
ZigBee (802.15.4) and Wi-Fi (802.11) are different networking standards. They both use 2.4GHz, but a ZigBee radio won't be able to identify nodes on a Wi-Fi network.
Zigbee (IEEE 802.15.4) and WiFi (IEEE 802.11) are two different PHY/MAC specifications. The first thing you have to do is:
Build a gateway between the Zigbee and WiFi networks.
Each smartphone should be capable of connecting to the Zigbee network.
Each smartphone should act as end device and Zigbee controller
should track the position of each smartphone. This controller should
be connected to Wifi via gateway [1]. Then you can easily track
number of smartphones connected to a network.
I need some info about advanced KVM network parameters. By advanced I mean the onces that are not accesible form GUI.
Something like:
network interface bandwidth
setting max transfer rate for emulated
network card
Are there any? I've had hard time googling for them
Emulated cards run with tap/macvtap interfaces from Linux. That's where you can set/query the parameters of the interface. For more gory details about tap interfaces & qemu you can read this post.
Above link given by dtatulea is really good.
I spend lot of time searching how to determine the current network type such as WIFI, 3G, Ethernet.
But I cannot find any information online in windows platform.
I want to detect the Ethernet network type, but I cannot find any API that can retrieve the network type.
I've find Connection Manager for keyword but there's less information.
Did anyone have any idea?
Please help me...I was blocked by this for 2 weeks.
Thanks.
Look in the registry key HKLM\system\state\connections, there is are entries for each of the possible network types, for instance:
When connected to a wireless network:
[HKLM\system\state\Connections\Network]
Adapters="BCMSDDHD1"
Count=dword:00000001
Descriptions="Business World"
when connected to activesync:
[HKLM\system\state\Connections\Desktop]
Adapters=""
Count=dword:00000001
Descriptions="CurrentDTPTNetwork"
The Count value under HKLM\system\state\connections gives you the total number of active connections.
In HKLM\system\state\Hardware you can find the current power state of the various devices.
There is an API on Windows Mobile that makes it easier to access these values vs. going directly to the registry. See the SystemState class documentation, specifically the ConnectionsNetworkCount and ConnectionsCount properties.