I'm trying to simply copy files that are modified using make. Here is the entire Makefile:
FILES = www/foo.html www/bar.html www/zap.php
all: $(FILES)
$(FILES): src/$#
cp src/$# $#
clean:
rm $(FILES)
After modifying a file src/www/bar.html, make does not copy the file:
$ make
make: Nothing to be done for 'all'.
$ make www/bar.html
make: 'www/bar.html' is up to date.
Why does make not see the prerequisite has been modified and that the file needs to be copied?
If I run make clean, make it works (copies all files).
src/$# is not well-defined. You want
$(FILES): %: src/%
which declares a pattern rule, and restricts its scope to the files in $(FILES). (You might want or even need to remove this restriction.)
Related
I have a make target that depends on a variable, which contains both PHONY and real targets.
This target needs to depend only on the real targets in the variable.
How can I test a variable to determine if it is a PHONY or not, so I can filter them out?
(I can test for a file's existence inside the recipe, but I don't want my target to be triggered by execution of any of the PHONY targets.)
Thanks!
There is a way to do it, but I would strongly recommend against it. First of, phony targets can be also file targets. And there is no way to tell a phony file target from a non-phony file target.
It looks like the question implies that the phony targets the author wants to ignore are all non-file targets. In this case see the example below.
.PHONY: phony_target .FORCE
.FORCE:
ALL_TARGETS = phony_target file_target undetermined_target
-include detect_phony.inc
all: final_target
# All done
final_target: $(REAL_TARGETS)
# create $# triggered by $?
#touch $#
ifeq (,$(MAKE_RESTARTS))
# Generate the list of real file targets in make include file
detect_phony.inc: .FORCE
#echo 'REAL_TARGETS = ' `ls $(ALL_TARGETS) 2>/dev/null` > $# |:
endif
file_target:
touch $#
undetermined_target phony_target:
# process $#
clean:
rm -f file_target final_target
Here are the test results:
$make clean
rm -f file_target final_target
$ make
# create final_target triggered by
# All done
$ touch file_target
$ make
# create final_target triggered by file_target
# All done
$ make
# All done
As you can see it only triggers the final target when the file target is updated.
Before you criticize - Here are the flaws of this implementation:
make is always called twice, updating the generated detect_phony.inc include file at every run
if detect_phony.inc gets corrupted somehow, make execution will be locked by syntax errors, until you manually delete it.
it can't handle phony file targets as I mentioned before
if another generated include is added in this makefile that requires another restart before detect_phony.inc this functionality will break.
So it this method is hacky and has several gotchas. I would not use it in production environment. I would insist on changing the top level Makefile first.
I have a makefile like the following:
.PHONY: all
all: foo_1.txt foo_2.txt foo_xxx.txt
.PHONY: clean
clean:
rm -f foo_* bar_*
foo_%.txt: bar_%.txt
cp $< $#
#.PRECIOUS: bar_%.txt
bar_%.txt:
touch $#
bar_2.txt:
touch $#
The output of "make all" is folowing
touch bar_1.txt
cp bar_1.txt foo_1.txt
touch bar_2.txt
cp bar_2.txt foo_2.txt
touch bar_xxx.txt
cp bar_xxx.txt foo_xxx.txt
rm bar_xxx.txt bar_1.txt
The intermediate files created by the rule using pattern (bar_xxx.txt, bar_1.txt) are removed on the end. I have found that this behaviour can be supressed by .PRECIOUS (in the code is the line intentionally commented out).
Why are intermediate files created by rule with pattern removed by default and files created by rule without pattern are not?
By the definition of "intermediate files", you can't have an intermediate file created by an explicit rule (a rule "without a pattern").
See the section on Chains of Implicit Rules to understand this feature. If you have specific questions then please update your question.
From the docs:
If you want make to simply ignore a makefile which does not exist
or cannot be remade, with no error message, use the -include directive
instead of include, like this:
-include FILENAMES...
This acts like include in every way except that there is no error
(not even a warning) if any of the FILENAMES (or any prerequisites of
any of the FILENAMES) do not exist or cannot be remade.
Given the following makefile:
$(shell rm -rf x foo)
-include mkfile
all: ;
mkfile : x ;
x : foo ;
.INTERMEDIATE : x
Running, I get:
make: *** No rule to make target 'foo', needed by 'x'. Stop.
Well, shouldn't Make just ignore this error, as we use a -include (not include) directive, per the documentation above?
make: *** No rule to make target 'foo', needed by 'x'. Stop.
Shouldn't make just ignore this error, as we use a -include (not include) directive, per the documentation above?
No! Your interpretation of the documentation is wrong.
The use of - in -include will ONLY ignore any files that succeed it, i.e. come after it. It will NOT ignore any file!
You have chosen to take part of the documentation out and build your interpretation on it.
there is no error (not even a warning) if any of the FILENAMES (or any prerequisites of any of the FILENAMES) do not exist or cannot be remade.
The above quote ONLY applies to files that succeed -include as in
-include FILENAMES...
it does not apply to every and any files.
Demonstration of - in include
To demonstrate this we can take a simple example as
$(shell rm -rf mkfile)
-include mkfile
all:
echo '$#'
.PHONY: all
In this instance either before, or at least on make's second pass, the file mkfile does not exist. If we were to execute this, the output would be
$ make
echo 'all'
all
Here make has ignored the fact that mkfile does not exist and has continued processing the makefile without warning or error. This is exactly what the documentation states.
If instead we removed the - before include and so had a makefile like
$(shell rm -rf mkfile)
include mkfile
all:
echo '$#'
.PHONY: all
Executing this would produce the output
$ make
makefile:3: mkfile: No such file or directory
make: *** No rule to make target 'mkfile'. Stop.
Now make has stopped because there is an error, the file mkfile does not exist and we haven't used -include.
I'm trying to write a makefile to produce several output files for each of several sources, using pattern rules.
I have the following Makefile (GNU Make 3.8.1):
all : foo.all bar.all
%.all : %.pdf %.svg
#echo Made $*
%.pdf :
touch $#
%.svg :
touch $#
.PHONY: foo.all bar.all
Since *.all do not represent real output files, I tried marking them as .PHONY. However, running make then doesn't work:
$ ls
Makefile
$ make
make: Nothing to be done for `all'.
According to make -d:
No implicit rule found for `all'.
Considering target file `foo.all'.
File `foo.all' does not exist.
Finished prerequisites of target file `foo.all'.
Must remake target `foo.all'.
Successfully remade target file `foo.all'.
Considering target file `bar.all'.
File `bar.all' does not exist.
Finished prerequisites of target file `bar.all'.
Must remake target `bar.all'.
Successfully remade target file `bar.all'.
Finished prerequisites of target file `all'.
Must remake target `all'.
Successfully remade target file `all'.
make: Nothing to be done for `all'.
which seems to be pretending to run the %.all rules, but skipping the bodies.
But with the .PHONY line commented out, Make runs the targets, but then spontaneously decides to delete the output files:
$ make
touch foo.pdf
touch foo.svg
Made foo
touch bar.pdf
touch bar.svg
Made bar
rm foo.pdf foo.svg bar.pdf bar.svg
According to make -d, it says:
Removing intermediate files...
Minimal example
A minimal example giving anomalous behavior:
%.all: %.out
#echo Made $*
%.out:
touch $#
I expect running make somefile.all to cause it to create the file somefile.out, but it gets deleted:
$ make somefile.all
touch somefile.out
Made somefile
rm somefile.out
Keeping make from deleting intermediary files
I recommend against using .PRECIOUS (see below as to why). Using .SECONDARY would preserve the .out files:
TARGETS=foo bar
all: $(TARGETS:=.all)
%.all: %.out
#echo Made $*
%.out:
touch $#
.SECONDARY: $(TARGETS:=.out)
$(TARGETS:=.all) just appends .all to all names in TARGETS. $(TARGETS:=.out) appends .out. We apparently cannot use %.out as a target of .SECONDARY. These just save having to relist all targets individually.
I prefer to not use .PRECIOUS for this because the documentation says
if make is killed or interrupted during the execution of their recipes, the target is not deleted.
This can leave corrupted files in the file system. Here's an example.
all: foo.all bar.all
%.all: %.out
#echo Made $*
%.out:
sh -e -c 'echo "{1, 2, 3" > $#; FAIL!; echo "}" >> $#'
.PRECIOUS: %.out
The FAIL! command simulates a tool that crashes in the middle of its work. Here's a shell session working with the Makefile above:
$ ls
Makefile
$ make
sh -e -c 'echo "{1, 2, 3" > foo.out; FAIL!; echo "}" >> foo.out'
sh: 1: FAIL!: not found
make: *** [foo.out] Error 127
$ cat foo.out
{1, 2, 3
Yikes... my foo.out file is incomplete. Let's try making again:
$ make
Made foo
sh -e -c 'echo "{1, 2, 3" > bar.out; FAIL!; echo "}" >> bar.out'
sh: 1: FAIL!: not found
make: *** [bar.out] Error 127
$ cat *.out
{1, 2, 3
{1, 2, 3
Make is none the wiser about files left around by earlier runs so when you run make again, it will take the corrupted files at face value. foo.out was not remade (despite the "Made foo" message) because it already exists and the Makefile went straight to trying to make bar.
.SECONDARY makes it so that:
The targets which .SECONDARY depends on are treated as intermediate files, except that they are never automatically deleted.
This means they are never automatically deleted just because they are intermediate files. The default make behavior of deleting targets that were being rebuilt if the tool rebuilding them crashed is not affected.
Using .PHONY with pattern rules
It seems though that .PHONY works only for targets that are explicit, not inferred. I've not found documentation confirming this. However, this works:
TARGETS:=foo bar
TARGETS_all:=$(TARGETS:=.all)
.PHONY: all
all: $(TARGETS_all)
.PHONY: $(TARGETS_all)
$(TARGETS_all): %.all: %.out
#echo Made $*
%.out:
touch $#
.SECONDARY: $(TARGETS:=.out)
In this rule $(TARGETS_all): %.all: %.out $(TARGETS_all): gives the list of targets to which the pattern can be applied. It makes foo.all and bar.all explicit targets. Without this, they would be inferred targets.
You can test that it works by creating file called foo.all in your directory and run make over and over. The foo.all file has no effect on make.
Your somefile.out files are considered intermediate by GNU make, which is why they are automatically deleted in your example. You can instruct GNU make to preserve these files by use the of .PRECIOUS special target, like this:
%.all: %.out
#echo Made $*
%.out:
touch $#
.PRECIOUS: %.out
I have a makefile that takes care of copying file from folder A to folder B.
here I have simple makefile to describe the problem I encounter.
ex:
all: a.txt b.txt
%.txt: test/%.txt
cp -a $< $#
when I invoke make command:
make
It copy 2 txt files.
after that, I remove a.txt in test folder and run make again
rm test/a.txt
make
I suppose make will detect unavailable prerequisites but it output:
make: Nothing to be done for `all'.
How can I have error output for this situation?
thanks!!
You are using a pattern rule, which Make ignores if the prerequisites are not available. Try this:
TEXTS := a.txt b.txt
all: $(TEXTS)
$(TEXTS): % : test/%
cp -a $< $#