Is there any way to achieve this without the need of external resources as Bash does?
I'd like to prompt user for input and copy the input into a variable in case it is multilined as well (for instance if he or she copy-pastes a text onto the prompt)
Perhaps using Powershell -command?
As Aacini mentioned, it's not possible to use a single set /p.
You could use a loop of set /p, but you need a type of end marker to leave the loop.
Or you could use copy con input.tmp, but then you have to finish the input with CTRL-Z.
A sample with sep /p stopping at the first empty line.
#echo off
setlocal EnableDelayedExpansion
SET LF=^
REM ** Two empty lines are required
call :input
echo !input!
exit /b
:input
set "input="
:inputLoop
set "line="
set /p "line=Enter text, stop with an empty line :"
if defined line (
set "input=!input!!line!!LF!"
goto :inputLoop
)
exit /b
I have this weird problem happening
I am downloading a a file using a wget, then set a var as first line of file, then comparing to string to verify the file. Weird thing is var is set as expected, echo works fien but when I use if to compare, var blows up. Look at example below:
set /p first_line=< c:\data.dsv
echo %first_line%
if %first_line% == SomefirstLine GOTO Success
When batch runs, echo gives correct var value, but in if it give first 3 lines, why is this weird thing happening?
The reason is probably the line termination in the downloaded file. If lines end with 0x0A (linefeed) without a 0x0D (carriage return), the set /p will read until the first 0x0D, end of file or max length is retrieved.
echo command will output until the first 0x0A, but the variable contents are the three "lines", and it can be verified using set first_line to see the real content of the variable.
You can use
set "first_line="
for /f "delims=" %%a in (c:\data.dsv) do set "first_line=%%a" & goto done
:done
Or if you prefer to read the file with the set /p method, then do that same processing on the retrieved variable to extract the required value
set /p first_line=< c:\data.dsv
set "first_first_line="
for /f "delims=" %%a in ("%first_line%"
) do if not defined first_first_line set "first_fisrt_line=%%a"
EDITED - It seems the OS versions affects the way it works.
The second proposed code was tested in a machine with XP and it worked, but in windows 7 it does not work. Once tested, the for command, instead of splitting the string on the 0x0A character, removes the 0x0A and the three lines are joined into one that is assigned to the variable. So, only the first option (with just the for loop) works on both versions.
Option 3 - To avoid reading the full file into memory, the output of the set command can be parsed to retrieve the real first line.
#echo off
:: get data
set /p "first_line="<c:\data.dsv
:: show data
echo(data retrieved with set /p
echo(----------------------------------------------------
echo(%first_line%
echo(----------------------------------------------------
set first_line
echo(----------------------------------------------------
echo(
:: get data 2
for /f "tokens=1,* delims==" %%a in ('set first_line^|find "first_line="') do set "first_line=%%b"
:: show data
echo(data retrieved with for
echo(----------------------------------------------------
echo(%first_line%
echo(----------------------------------------------------
set first_line
echo(----------------------------------------------------
:: test data
set "SomeFirstLine=...."
if "%first_line%"=="SomeFirstLine" GOTO Success
Note the double quotes in the if compare - they protect it from spaces and & characters.
set /p first_line=< c:\data.dsv
echo %first_line%
if "%first_line%" == "SomefirstLine" GOTO Success
Simply script, probably a simple question:
set /p customsettings="Some input prompt: "
if /i %customsettings:~0,1% equ Y echo Some output
^-This works fine...
set custom=1
if %custom% equ 1 (
set /p customsettings="Some input prompt: "
echo Some output
)
^-...and this works fine.
So why doesn't this work fine?:
set custom=1
if %custom% equ 1 (
set /p customsettings="Some input prompt: "
if /i %customsettings:~0,1% equ Y echo Some output
)
The set /p customsettings line get skipped only when it is pinched between two if-statements.
I'm curious why this happens, and how to fix it.
Note: The problem still persists regardless of EnableDelayedExpansion's setting.
You can read a lot about delayed expansion on this site. An entire IF/FOR construct (or multiple lines within parens) are loaded and expanded as 1 line. So you have to consider LOAD-TIME behavior and RUN-TIME behavior. Try this:
#echo off
setlocal enabledelayedexpansion
set custom=1
if %custom% equ 1 (
set /p customsettings="Some input prompt: "
if /i "!customsettings:~0,1!"=="Y" echo Some output
)
What is the Windows batch equivalent of the Linux shell command echo -n which suppresses the newline at the end of the output?
The idea is to write on the same line inside a loop.
Using set and the /p parameter you can echo without newline:
C:\> echo Hello World
Hello World
C:\> echo|set /p="Hello World"
Hello World
C:\>
Source
Using: echo | set /p= or <NUL set /p= will both work to suppress the newline.
However, this can be very dangerous when writing more advanced scripts when checking the ERRORLEVEL becomes important as setting set /p= without specifying a variable name will set the ERRORLEVEL to 1.
A better approach would be to just use a dummy variable name like so:
echo | set /p dummyName=Hello World
This will produce exactly what you want without any sneaky stuff going on in the background as I had to find out the hard way, but this only works with the piped version; <NUL set /p dummyName=Hello will still raise the ERRORLEVEL to 1.
The simple SET /P method has limitations that vary slightly between Windows versions.
Leading quotes may be stripped
Leading white space may be stripped
Leading = causes a syntax error.
See http://www.dostips.com/forum/viewtopic.php?f=3&t=4209 for more information.
jeb posted a clever solution that solves most of the problems at Output text without linefeed, even with leading space or = I've refined the method so that it can safely print absolutely any valid batch string without the new line, on any version of Windows from XP onward. Note that the :writeInitialize method contains a string literal that may not post well to the site. A remark is included that describes what the character sequence should be.
The :write and :writeVar methods are optimized such that only strings containing troublesome leading characters are written using my modified version of jeb's COPY method. Non-troublesome strings are written using the simpler and faster SET /P method.
#echo off
setlocal disableDelayedExpansion
call :writeInitialize
call :write "=hello"
call :write " world!%$write.sub%OK!"
echo(
setlocal enableDelayedExpansion
set lf=^
set "str= hello!lf!world^!!!$write.sub!hello!lf!world"
echo(
echo str=!str!
echo(
call :write "str="
call :writeVar str
echo(
exit /b
:write Str
::
:: Write the literal string Str to stdout without a terminating
:: carriage return or line feed. Enclosing quotes are stripped.
::
:: This routine works by calling :writeVar
::
setlocal disableDelayedExpansion
set "str=%~1"
call :writeVar str
exit /b
:writeVar StrVar
::
:: Writes the value of variable StrVar to stdout without a terminating
:: carriage return or line feed.
::
:: The routine relies on variables defined by :writeInitialize. If the
:: variables are not yet defined, then it calls :writeInitialize to
:: temporarily define them. Performance can be improved by explicitly
:: calling :writeInitialize once before the first call to :writeVar
::
if not defined %~1 exit /b
setlocal enableDelayedExpansion
if not defined $write.sub call :writeInitialize
set $write.special=1
if "!%~1:~0,1!" equ "^!" set "$write.special="
for /f delims^=^ eol^= %%A in ("!%~1:~0,1!") do (
if "%%A" neq "=" if "!$write.problemChars:%%A=!" equ "!$write.problemChars!" set "$write.special="
)
if not defined $write.special (
<nul set /p "=!%~1!"
exit /b
)
>"%$write.temp%_1.txt" (echo !str!!$write.sub!)
copy "%$write.temp%_1.txt" /a "%$write.temp%_2.txt" /b >nul
type "%$write.temp%_2.txt"
del "%$write.temp%_1.txt" "%$write.temp%_2.txt"
set "str2=!str:*%$write.sub%=%$write.sub%!"
if "!str2!" neq "!str!" <nul set /p "=!str2!"
exit /b
:writeInitialize
::
:: Defines 3 variables needed by the :write and :writeVar routines
::
:: $write.temp - specifies a base path for temporary files
::
:: $write.sub - contains the SUB character, also known as <CTRL-Z> or 0x1A
::
:: $write.problemChars - list of characters that cause problems for SET /P
:: <carriageReturn> <formFeed> <space> <tab> <0xFF> <equal> <quote>
:: Note that <lineFeed> and <equal> also causes problems, but are handled elsewhere
::
set "$write.temp=%temp%\writeTemp%random%"
copy nul "%$write.temp%.txt" /a >nul
for /f "usebackq" %%A in ("%$write.temp%.txt") do set "$write.sub=%%A"
del "%$write.temp%.txt"
for /f %%A in ('copy /z "%~f0" nul') do for /f %%B in ('cls') do (
set "$write.problemChars=%%A%%B ""
REM the characters after %%B above should be <space> <tab> <0xFF>
)
exit /b
As an addendum to #xmechanix's answer, I noticed through writing the contents to a file:
echo | set /p dummyName=Hello World > somefile.txt
That this will add an extra space at the end of the printed string, which can be inconvenient, specially since we're trying to avoid adding a new line (another whitespace character) to the end of the string.
Fortunately, quoting the string to be printed, i.e. using:
echo | set /p dummyName="Hello World" > somefile.txt
Will print the string without any newline or space character at the end.
A solution for the stripped white space in SET /P:
the trick is that backspace char which you can summon in the text editor EDIT for DOS. To create it in EDIT press ctrlP+ctrlH.
I would paste it here but this webpage can't display it. It's visible on Notepad though (it's werid, like a small black rectangle with a white circle in the center)
So you write this:
<nul set /p=.9 Hello everyone
The dot can be any char, it's only there to tell SET /P that the text starts there, before the spaces, and not at the "Hello".
The "9" is a representation of the backspace char that I can't display here. You have to put it instead of the 9, and it will delete the "." , after which you'll get this:
Hello Everyone
instead of:
Hello Everyone
I hope it helps
Here is another method, it uses Powershell Write-Host which has a -NoNewLine parameter, combine that with start /b and it offers the same functionality from batch.
NoNewLines.cmd
#ECHO OFF
start /b /wait powershell.exe -command "Write-Host -NoNewLine 'Result 1 - ';Write-Host -NoNewLine 'Result 2 - ';Write-Host -NoNewLine 'Result 3 - '"
PAUSE
Output
Result 1 - Result 2 - Result 3 - Press any key to continue . . .
This one below is slightly different, doesn't work exactly like the OP wants, but is interesting because each result overwrites the previous result emulating a counter.
#ECHO OFF
start /b /wait powershell.exe -command "Write-Host -NoNewLine 'Result 1 - '"
start /b /wait powershell.exe -command "Write-Host -NoNewLine 'Result 2 - '"
start /b /wait powershell.exe -command "Write-Host -NoNewLine 'Result 3 - '"
start /b /wait powershell.exe -command "Write-Host -NoNewLine 'Result 4 - '"
start /b /wait powershell.exe -command "Write-Host -NoNewLine 'Result 5 - '"
start /b /wait powershell.exe -command "Write-Host -NoNewLine 'Result 6 - '"
start /b /wait powershell.exe -command "Write-Host -NoNewLine 'Result 7 - '"
start /b /wait powershell.exe -command "Write-Host -NoNewLine 'Result 8 - '"
start /b /wait powershell.exe -command "Write-Host -NoNewLine 'Result 9 - '"
PAUSE
You can remove the newline using "tr" from gnuwin32 (coreutils package)
#echo off
set L=First line
echo %L% | tr -d "\r\n"
echo Second line
pause
By the way, if you are doing lots of scripting, gnuwin32 is a goldmine.
I made a function out of #arnep 's idea:
echo|set /p="Hello World"
here it is:
:SL (sameline)
echo|set /p=%1
exit /b
Use it with call :SL "Hello There"
I know this is nothing special but it took me so long to think of it I figured I'd post it here.
DIY cw.exe (console write) utility
If you don't find it out-of-the-box, off-the-shelf, you can DIY. With this cw utility you can use every kind of characters. At least, I'd like to think so. Please stress-test it and let me know.
Tools
All you need is .NET installed, which is very common nowadays.
Materials
Some characters typed/copy-pasted.
Steps
Create .bat file with the following content.
/* >nul 2>&1
#echo off
setlocal
set exe=cw
for /f "tokens=* delims=" %%v in ('dir /b /s /a:-d /o:-n "%SystemRoot%\Microsoft.NET\Framework\*csc.exe"') do set "csc=%%v"
"%csc%" -nologo -out:"%exe%.exe" "%~f0"
endlocal
exit /b %errorlevel%
*/
using System;
namespace cw {
class Program {
static void Main() {
var exe = Environment.GetCommandLineArgs()[0];
var rawCmd = Environment.CommandLine;
var line = rawCmd.Remove(rawCmd.IndexOf(exe),exe.Length).TrimStart('"');
line = line.Length < 2 ? "\r" : line.Substring(2) ;
Console.Write(line);
}
}
}
Run it.
Now you have a nice 4KB utility so you can delete the .bat.
Alternatively, you can insert this code as a subroutine in any batch, send the resulting .exe to %temp%, use it in your batch and delete it when you're done.
How to use
If you want write something without new line:
cw Whatever you want, even with "", but remember to escape ^|, ^^, ^&, etc. unless double-quoted, like in "| ^ &".
If you want a carriage return (going to the beginning of the line), run just
cw
So try this from command line:
for /l %a in (1,1,1000) do #(cw ^|&cw&cw /&cw&cw -&cw&cw \&cw)
From here
<nul set /p =Testing testing
and also to echo beginning with spaces use
echo.Message goes here
Maybe this is what your looking for, it's a old school script... :P
set nl=^& echo.
echo %nl%The%nl%new%nl%line%nl%is%nl%not%nl%apparent%nl%throughout%nl%text%nl%
echo only in prompt.
pause
or maybe your trying to replace a current line instead of writing to a new line?
you can experiment with this by removing the "%bs%" after the "." sign and also by spacing out the other "%bs%" after the "Example message".
for /f %%a in ('"prompt $H&for %%b in (1) do rem"') do set "bs=%%a"
<nul set /p=.%bs% Example message %bs%
pause
I find this really interesting because it uses a variable for a purpose other than what it is intended to do. as you can see the "%bs%" represents a backspace. The second "%bs%" uses the backspace to add spaces after the "Example message" to separate the "Pause command's output" without actually adding a visible character after the "Example message". However, this is also possible with a regular percentage sign.
Sample 1: This works and produces Exit code = 0. That is Good.
Note the "." , directly after echo.
C:\Users\phife.dog\gitrepos\1\repo_abc\scripts #
#echo.| set /p JUNK_VAR=This is a message displayed like Linux echo -n would display it ... & echo %ERRORLEVEL%
This is a message displayed like Linux echo -n would display it ... 0
Sample 2: This works but produces Exit code = 1. That is Bad.
Please note the lack of ".", after echo. That appears to be the difference.
C:\Users\phife.dog\gitrepos\1\repo_abc\scripts #
#echo | set /p JUNK_VAR=This is a message displayed like Linux echo -n would display it ... & echo %ERRORLEVEL%
This is a message displayed like Linux echo -n would display it ... 1
Inspired by the answers to this question, I made a simple counter batch script that keeps printing the progress value (0-100%) on the same line (overwritting the previous one). Maybe this will also be valuable to others looking for a similar solution.
Remark: The * are non-printable characters, these should be entered using [Alt + Numpad 0 + Numpad 8] key combination, which is the backspace character.
#ECHO OFF
FOR /L %%A in (0, 10, 100) DO (
ECHO|SET /P="****%%A%%"
CALL:Wait 1
)
GOTO:EOF
:Wait
SET /A "delay=%~1+1"
CALL PING 127.0.0.1 -n %delay% > NUL
GOTO:EOF
You can suppress the new line by using the set /p command. The set /p command does not recognize a space, for that you can use a dot and a backspace character to make it recognize it. You can also use a variable as a memory and store what you want to print in it, so that you can print the variable instead of the sentence. For example:
#echo off
setlocal enabledelayedexpansion
for /f %%a in ('"prompt $H & for %%b in (1) do rem"') do (set "bs=%%a")
cls
set "var=Hello World! :)"
set "x=0"
:loop
set "display=!var:~%x%,1!"
<nul set /p "print=.%bs%%display%"
ping -n 1 localhost >nul
set /a "x=%x% + 1"
if "!var:~%x%,1!" == "" goto end
goto loop
:end
echo.
pause
exit
In this way you can print anything without a new line. I have made the program to print the characters one by one, but you can use words too instead of characters by changing the loop.
In the above example I used "enabledelayedexpansion" so the set /p command does not recognize "!" character and prints a dot instead of that. I hope that you don't have the use of the exclamation mark "!" ;)
Use EchoX.EXE from the terrific "Shell Scripting Toolkit" by Bill Stewart
How to suppress the linefeed in a Windows Cmd script:
#Echo Off
Rem Print three Echos in one line of output
EchoX -n "Part 1 - "
EchoX -n "Part 2 - "
EchoX "Part 3"
Rem
gives:
Part 1 - Part 2 - Part 3
{empty line}
d:\Prompt>
The help for this usage is:
Usage: echox [-n] message
-n Do not skip to the next line.
message The text to be displayed.
The utility is smaller than 48K, and should live in your Path. More things it can do:- print text without moving to the next line- print text justified to the left, center, or right, within a certain width- print text with Tabs, Linefeeds, and Returns- print text in foreground and background colors
The Toolkit includes twelve more great scripting tricks.
The download page also hosts three other useful tool packages.
I found this simple one-line batch file called "EchoPart.bat" to be quite useful.
#echo | set /p=%*
I could then write something like the line below even on an interactive CMD line, or as part of a shortcut. It opens up a few new possibilities.
echopart "Hello, " & echopart "and then " & echo Goodbye
And if you're using it in batch files, the texts can be got from parameter variables instead of immutable strings. For instance:
#echopart Hello %* & #echo , how are you?
So that executing this line in "SayHello.bat" allows:
or even...
Have a play, and have fun!
I believe there's no such option. Alternatively you can try this
set text=Hello
set text=%text% world
echo %text%
Echo with preceding space and without newline
As stated by Pedro earlier, echo without new line and with preceding space works (provided "9" is a true [BackSpace]).
<nul set /p=.9 Hello everyone
I had some issues getting it to work in Windows 10 with the new console but managed the following way.
In CMD type:
echo .◘>bs.txt
I got "◘" by pressing [Alt] + [8]
(the actual symbol may vary depending upon codepage).
Then it's easy to copy the result from "bs.txt" using Notepad.exe to where it's needed.
#echo off
<nul set /p "_s=.◘ Hello everyone"
echo: here
With jscript:
#if (#X)==(#Y) #end /*
#cscript //E:JScript //nologo "%~nx0" %*
#exit /b %errorlevel%
*/if(WScript.Arguments.Count()>0) WScript.StdOut.Write(WScript.Arguments.Item(0));
if it is called write.bat you can test it like:
call write.bat string & echo _Another_String_
If you want to use powershell but with cmd defined variables you can use:
set str=_My_StrinG_
powershell "Write-Host -NoNewline ""%str%"""" & echo #Another#STRING#
Late answer here, but for anyone who needs to write special characters to a single line who find dbenham's answer to be about 80 lines too long and whose scripts may break (perhaps due to user-input) under the limitations of simply using set /p, it's probably easiest to just to pair your .bat or .cmd with a compiled C++ or C-language executable and then just cout or printf the characters. This will also allow you to easily write multiple times to one line if you're showing a sort of progress bar or something using characters, as OP apparently was.