Related
Given an array of length N and an integer K, sort the array as much as possible such that no element travels more than K positions to its left. An element however can travel as much as it likes to its right.
Let's define sortedness as the number of disordered pairs, i.e.: sortedness(1,2,3) = 0 and sortedness(3,1,2) = 2.
Clarification: If the first k+1 items of the array are moved to the end of the array, the other ones should be considered moved k+1 positions to the left.
This is an interview question. I thought of using a bubble sort. The outer loop would run K times with a run-time of O(nk). The smallest integer would be the only integer shifted to the left K times. The other integers would be shifted to the left less than K times.
Is there a more efficient way to approach this problem?
Use a min heap to sort the list of n elements in O(n log k).
Add the first k+1 unsorted elements to the heap.
Repeat this step: pop off the min element from the heap. Add it to the end of the sorted list. add the next unsorted element to the heap.
Because the heap always has at most k+1 elements regardless of n, all heap operations are O(log k), and the total running time is O(n log k)
Why is this correct?
Suppose it isn't. Then for some inputs my algorithm gives non-optimal sorts. Let I be such an input, let A be the output of my algorithm on I, and let B be the optimal sort.
Let i be the first index where A and B disagree. Let x = A[i], y = B[i], and let j be the index of x in B.
I claim that swapping x and y in B improve the sortedness of B, which is a contradiction.
Because A and B are identical for positions before i, the same set of k+1 elements are eligible to go into position i for both. Because my algorithm chose x to be the min of those elements, we know that x is less than y. We also know j is greater than i.
What happens when we swap x and y in B?
First, note that the change in sortedness is unaffected by anything to the left of i or to the right of j, because their positions relative to both x and y are unchanged by the swap.
We know there are no elements between i and j that are less than x, because my sort chose the smallest available element. Therefore all elements between i and j are at least as large as x.
For each element between i and j equal to x, swapping x and y improves sortedness by 1 because we improve y relative to these elements and x is unaffected.
For each element between i and j greater than x, the sortedness of x relative to these is improved by 1, and in the worst case the sortedness of y relative to these is degraded by 1, so the net effect is at worst 0.
Furthermore, swapping x and y improves the sortedness of x relative to y by 1, so this swap strictly improves overall sortedness.
Contradiction.
Naive approach:
iterate the array from left to right.For each position i we consider a subarray from i to i+k. Then we have to get the minimum valued element in this subarray and swap the 1st element of this subarray with this element. Now, go to position i+1 and do the same.
Optimized Approach:
We can use segment tree to solve this. Using this data structure you can find the minimum value between any range of an array and also edit any data online in O(logn). In your problem, we can get the solution array using following steps,
arr[1] = minimum value between position 1 to min(k,n), then edit this position with infinity
arr[2] = min value between position 1 to min(k+1,n), then edit this position with infinity
arr[3] = min value between position 1 to min(k+2,n), then edit this position with infinity
arr[4] = min value between position 1 to min(k+3,n), then edit this position with infinity
...
...
arr[n] = min value between position 1 to min(k+n,n), then edit this position with infinity
Overall complexity O(nlogn)
for example:
given array = 5 3 4 7 8 2 1 0 and K = 2
using this algorithm you will get the solution array as this:
3 4 5 2 1 0 7 8 sortedness value = 12
Hope it helps!
Best regards,
Agassaa
Given an array A with N elements I need to find pair (i,j) such that i is not equal to j and if we write the sum A[i]+A[j] for all pairs of (i,j) then it comes at the kth position.
Example : Let N=4 and arrays A=[1 2 3 4] and if K=3 then answer is 5 as we can see it clearly that sum array becomes like this : [3,4,5,5,6,7]
I can't go for all pair of i and j as N can go up to 100000. Please help how to solve this problem
I mean something like this :
int len=N*(N+1)/2;
int sum[len];
int count=0;
for(int i=0;i<N;i++){
for(int j=i+1;j<N;j++){
sum[count]=A[i]+A[j];
count++;
}
}
//Then just find kth element.
We can't go with this approach
A solution that is based on a fact that K <= 50: Let's take the first K + 1 elements of the array in a sorted order. Now we can just try all their combinations. Proof of correctness: let's assume that a pair (i, j) is the answer, where j > K + 1. But there are K pairs with the same or smaller sum: (1, 2), (1, 3), ..., (1, K + 1). Thus, it cannot be the K-th pair.
It is possible to achieve an O(N + K ^ 2) time complexity by choosing the K + 1 smallest numbers using a quickselect algorithm(it is possible to do even better, but it is not required). You can also just the array and get an O(N * log N + K ^ 2 * log K) complexity.
I assume that you got this question from http://www.careercup.com/question?id=7457663.
If k is close to 0 then the accepted answer to How to find kth largest number in pairwise sums like setA + setB? can be adapted quite easily to this problem and be quite efficient. You need O(n log(n)) to sort the array, O(n) to set up a priority queue, and then O(k log(k)) to iterate through the elements. The reversed solution is also efficient if k is near n*n - n.
If k is close to n*n/2 then that won't be very good. But you can adapt the pivot approach of http://en.wikipedia.org/wiki/Quickselect to this problem. First in time O(n log(n)) you can sort the array. In time O(n) you can set up a data structure representing the various contiguous ranges of columns. Then you'll need to select pivots O(log(n)) times. (Remember, log(n*n) = O(log(n)).) For each pivot, you can do a binary search of each column to figure out where it split it in time O(log(n)) per column, and total cost of O(n log(n)) for all columns.
The resulting algorithm will be O(n log(n) log(n)).
Update: I do not have time to do the finger exercise of supplying code. But I can outline some of the classes you might have in an implementation.
The implementation will be a bit verbose, but that is sometimes the cost of a good general-purpose algorithm.
ArrayRangeWithAddend. This represents a range of an array, summed with one value.with has an array (reference or pointer so the underlying data can be shared between objects), a start and an end to the range, and a shiftValue for the value to add to every element in the range.
It should have a constructor. A method to give the size. A method to partition(n) it into a range less than n, the count equal to n, and a range greater than n. And value(i) to give the i'th value.
ArrayRangeCollection. This is a collection of ArrayRangeWithAddend objects. It should have methods to give its size, pick a random element, and a method to partition(n) it into an ArrayRangeCollection that is below n, count of those equal to n, and an ArrayRangeCollection that is larger than n. In the partition method it will be good to not include ArrayRangeWithAddend objects that have size 0.
Now your main program can sort the array, and create an ArrayRangeCollection covering all pairs of sums that you are interested in. Then the random and partition method can be used to implement the standard quickselect algorithm that you will find in the link I provided.
Here is how to do it (in pseudo-code). I have now confirmed that it works correctly.
//A is the original array, such as A=[1,2,3,4]
//k (an integer) is the element in the 'sum' array to find
N = A.length
//first we find i
i = -1
nl = N
k2 = k
while (k2 >= 0) {
i++
nl--
k2 -= nl
}
//then we find j
j = k2 + nl + i + 1
//now compute the sum at index position k
kSum = A[i] + A[j]
EDIT:
I have now tested this works. I had to fix some parts... basically the k input argument should use 0-based indexing. (The OP seems to use 1-based indexing.)
EDIT 2:
I'll try to explain my theory then. I began with the concept that the sum array should be visualised as a 2D jagged array (diminishing in width as the height increases), with the coordinates (as mentioned in the OP) being i and j. So for an array such as [1,2,3,4,5] the sum array would be conceived as this:
3,4,5,6,
5,6,7,
7,8,
9.
The top row are all values where i would equal 0. The second row is where i equals 1. To find the value of 'j' we do the same but in the column direction.
... Sorry I cannot explain this any better!
Given two sorted arrays of numbers, we want to find the pair with the kth largest possible sum. (A pair is one element from the first array and one element from the second array). For example, with arrays
[2, 3, 5, 8, 13]
[4, 8, 12, 16]
The pairs with largest sums are
13 + 16 = 29
13 + 12 = 25
8 + 16 = 24
13 + 8 = 21
8 + 12 = 20
So the pair with the 4th largest sum is (13, 8). How to find the pair with the kth largest possible sum?
Also, what is the fastest algorithm? The arrays are already sorted and sizes M and N.
I am already aware of the O(Klogk) solution , using Max-Heap given here .
It also is one of the favorite Google interview question , and they demand a O(k) solution .
I've also read somewhere that there exists a O(k) solution, which i am unable to figure out .
Can someone explain the correct solution with a pseudocode .
P.S.
Please DON'T post this link as answer/comment.It DOESN'T contain the answer.
I start with a simple but not quite linear-time algorithm. We choose some value between array1[0]+array2[0] and array1[N-1]+array2[N-1]. Then we determine how many pair sums are greater than this value and how many of them are less. This may be done by iterating the arrays with two pointers: pointer to the first array incremented when sum is too large and pointer to the second array decremented when sum is too small. Repeating this procedure for different values and using binary search (or one-sided binary search) we could find Kth largest sum in O(N log R) time, where N is size of the largest array and R is number of possible values between array1[N-1]+array2[N-1] and array1[0]+array2[0]. This algorithm has linear time complexity only when the array elements are integers bounded by small constant.
Previous algorithm may be improved if we stop binary search as soon as number of pair sums in binary search range decreases from O(N2) to O(N). Then we fill auxiliary array with these pair sums (this may be done with slightly modified two-pointers algorithm). And then we use quickselect algorithm to find Kth largest sum in this auxiliary array. All this does not improve worst-case complexity because we still need O(log R) binary search steps. What if we keep the quickselect part of this algorithm but (to get proper value range) we use something better than binary search?
We could estimate value range with the following trick: get every second element from each array and try to find the pair sum with rank k/4 for these half-arrays (using the same algorithm recursively). Obviously this should give some approximation for needed value range. And in fact slightly improved variant of this trick gives range containing only O(N) elements. This is proven in following paper: "Selection in X + Y and matrices with sorted rows and columns" by A. Mirzaian and E. Arjomandi. This paper contains detailed explanation of the algorithm, proof, complexity analysis, and pseudo-code for all parts of the algorithm except Quickselect. If linear worst-case complexity is required, Quickselect may be augmented with Median of medians algorithm.
This algorithm has complexity O(N). If one of the arrays is shorter than other array (M < N) we could assume that this shorter array is extended to size N with some very small elements so that all calculations in the algorithm use size of the largest array. We don't actually need to extract pairs with these "added" elements and feed them to quickselect, which makes algorithm a little bit faster but does not improve asymptotic complexity.
If k < N we could ignore all the array elements with index greater than k. In this case complexity is equal to O(k). If N < k < N(N-1) we just have better complexity than requested in OP. If k > N(N-1), we'd better solve the opposite problem: k'th smallest sum.
I uploaded simple C++11 implementation to ideone. Code is not optimized and not thoroughly tested. I tried to make it as close as possible to pseudo-code in linked paper. This implementation uses std::nth_element, which allows linear complexity only on average (not worst-case).
A completely different approach to find K'th sum in linear time is based on priority queue (PQ). One variation is to insert largest pair to PQ, then repeatedly remove top of PQ and instead insert up to two pairs (one with decremented index in one array, other with decremented index in other array). And take some measures to prevent inserting duplicate pairs. Other variation is to insert all possible pairs containing largest element of first array, then repeatedly remove top of PQ and instead insert pair with decremented index in first array and same index in second array. In this case there is no need to bother about duplicates.
OP mentions O(K log K) solution where PQ is implemented as max-heap. But in some cases (when array elements are evenly distributed integers with limited range and linear complexity is needed only on average, not worst-case) we could use O(1) time priority queue, for example, as described in this paper: "A Complexity O(1) Priority Queue for Event Driven Molecular Dynamics Simulations" by Gerald Paul. This allows O(K) expected time complexity.
Advantage of this approach is a possibility to provide first K elements in sorted order. Disadvantages are limited choice of array element type, more complex and slower algorithm, worse asymptotic complexity: O(K) > O(N).
EDIT: This does not work. I leave the answer, since apparently I am not the only one who could have this kind of idea; see the discussion below.
A counter-example is x = (2, 3, 6), y = (1, 4, 5) and k=3, where the algorithm gives 7 (3+4) instead of 8 (3+5).
Let x and y be the two arrays, sorted in decreasing order; we want to construct the K-th largest sum.
The variables are: i the index in the first array (element x[i]), j the index in the second array (element y[j]), and k the "order" of the sum (k in 1..K), in the sense that S(k)=x[i]+y[j] will be the k-th greater sum satisfying your conditions (this is the loop invariant).
Start from (i, j) equal to (0, 0): clearly, S(1) = x[0]+y[0].
for k from 1 to K-1, do:
if x[i+1]+ y[j] > x[i] + y[j+1], then i := i+1 (and j does not change) ; else j:=j+1
To see that it works, consider you have S(k) = x[i] + y[j]. Then, S(k+1) is the greatest sum which is lower (or equal) to S(k), and such as at least one element (i or j) changes. It is not difficult to see that exactly one of i or j should change.
If i changes, the greater sum you can construct which is lower than S(k) is by setting i=i+1, because x is decreasing and all the x[i'] + y[j] with i' < i are greater than S(k). The same holds for j, showing that S(k+1) is either x[i+1] + y[j] or x[i] + y[j+1].
Therefore, at the end of the loop you found the K-th greater sum.
tl;dr: If you look ahead and look behind at each iteration, you can start with the end (which is highest) and work back in O(K) time.
Although the insight underlying this approach is, I believe, sound, the code below is not quite correct at present (see comments).
Let's see: first of all, the arrays are sorted. So, if the arrays are a and b with lengths M and N, and as you have arranged them, the largest items are in slots M and N respectively, the largest pair will always be a[M]+b[N].
Now, what's the second largest pair? It's going to have perhaps one of {a[M],b[N]} (it can't have both, because that's just the largest pair again), and at least one of {a[M-1],b[N-1]}. BUT, we also know that if we choose a[M-1]+b[N-1], we can make one of the operands larger by choosing the higher number from the same list, so it will have exactly one number from the last column, and one from the penultimate column.
Consider the following two arrays: a = [1, 2, 53]; b = [66, 67, 68]. Our highest pair is 53+68. If we lose the smaller of those two, our pair is 68+2; if we lose the larger, it's 53+67. So, we have to look ahead to decide what our next pair will be. The simplest lookahead strategy is simply to calculate the sum of both possible pairs. That will always cost two additions, and two comparisons for each transition (three because we need to deal with the case where the sums are equal);let's call that cost Q).
At first, I was tempted to repeat that K-1 times. BUT there's a hitch: the next largest pair might actually be the other pair we can validly make from {{a[M],b[N]}, {a[M-1],b[N-1]}. So, we also need to look behind.
So, let's code (python, should be 2/3 compatible):
def kth(a,b,k):
M = len(a)
N = len(b)
if k > M*N:
raise ValueError("There are only %s possible pairs; you asked for the %sth largest, which is impossible" % M*N,k)
(ia,ib) = M-1,N-1 #0 based arrays
# we need this for lookback
nottakenindices = (0,0) # could be any value
nottakensum = float('-inf')
for i in range(k-1):
optionone = a[ia]+b[ib-1]
optiontwo = a[ia-1]+b[ib]
biggest = max((optionone,optiontwo))
#first deal with look behind
if nottakensum > biggest:
if optionone == biggest:
newnottakenindices = (ia,ib-1)
else: newnottakenindices = (ia-1,ib)
ia,ib = nottakenindices
nottakensum = biggest
nottakenindices = newnottakenindices
#deal with case where indices hit 0
elif ia <= 0 and ib <= 0:
ia = ib = 0
elif ia <= 0:
ib-=1
ia = 0
nottakensum = float('-inf')
elif ib <= 0:
ia-=1
ib = 0
nottakensum = float('-inf')
#lookahead cases
elif optionone > optiontwo:
#then choose the first option as our next pair
nottakensum,nottakenindices = optiontwo,(ia-1,ib)
ib-=1
elif optionone < optiontwo: # choose the second
nottakensum,nottakenindices = optionone,(ia,ib-1)
ia-=1
#next two cases apply if options are equal
elif a[ia] > b[ib]:# drop the smallest
nottakensum,nottakenindices = optiontwo,(ia-1,ib)
ib-=1
else: # might be equal or not - we can choose arbitrarily if equal
nottakensum,nottakenindices = optionone,(ia,ib-1)
ia-=1
#+2 - one for zero-based, one for skipping the 1st largest
data = (i+2,a[ia],b[ib],a[ia]+b[ib],ia,ib)
narrative = "%sth largest pair is %s+%s=%s, with indices (%s,%s)" % data
print (narrative) #this will work in both versions of python
if ia <= 0 and ib <= 0:
raise ValueError("Both arrays exhausted before Kth (%sth) pair reached"%data[0])
return data, narrative
For those without python, here's an ideone: http://ideone.com/tfm2MA
At worst, we have 5 comparisons in each iteration, and K-1 iterations, which means that this is an O(K) algorithm.
Now, it might be possible to exploit information about differences between values to optimise this a little bit, but this accomplishes the goal.
Here's a reference implementation (not O(K), but will always work, unless there's a corner case with cases where pairs have equal sums):
import itertools
def refkth(a,b,k):
(rightia,righta),(rightib,rightb) = sorted(itertools.product(enumerate(a),enumerate(b)), key=lamba((ia,ea),(ib,eb):ea+eb)[k-1]
data = k,righta,rightb,righta+rightb,rightia,rightib
narrative = "%sth largest pair is %s+%s=%s, with indices (%s,%s)" % data
print (narrative) #this will work in both versions of python
return data, narrative
This calculates the cartesian product of the two arrays (i.e. all possible pairs), sorts them by sum, and takes the kth element. The enumerate function decorates each item with its index.
The max-heap algorithm in the other question is simple, fast and correct. Don't knock it. It's really well explained too. https://stackoverflow.com/a/5212618/284795
Might be there isn't any O(k) algorithm. That's okay, O(k log k) is almost as fast.
If the last two solutions were at (a1, b1), (a2, b2), then it seems to me there are only four candidate solutions (a1-1, b1) (a1, b1-1) (a2-1, b2) (a2, b2-1). This intuition could be wrong. Surely there are at most four candidates for each coordinate, and the next highest is among the 16 pairs (a in {a1,a2,a1-1,a2-1}, b in {b1,b2,b1-1,b2-1}). That's O(k).
(No it's not, still not sure whether that's possible.)
[2, 3, 5, 8, 13]
[4, 8, 12, 16]
Merge the 2 arrays and note down the indexes in the sorted array. Here is the index array looks like (starting from 1 not 0)
[1, 2, 4, 6, 8]
[3, 5, 7, 9]
Now start from end and make tuples. sum the elements in the tuple and pick the kth largest sum.
public static List<List<Integer>> optimization(int[] nums1, int[] nums2, int k) {
// 2 * O(n log(n))
Arrays.sort(nums1);
Arrays.sort(nums2);
List<List<Integer>> results = new ArrayList<>(k);
int endIndex = 0;
// Find the number whose square is the first one bigger than k
for (int i = 1; i <= k; i++) {
if (i * i >= k) {
endIndex = i;
break;
}
}
// The following Iteration provides at most endIndex^2 elements, and both arrays are in ascending order,
// so k smallest pairs must can be found in this iteration. To flatten the nested loop, refer
// 'https://stackoverflow.com/questions/7457879/algorithm-to-optimize-nested-loops'
for (int i = 0; i < endIndex * endIndex; i++) {
int m = i / endIndex;
int n = i % endIndex;
List<Integer> item = new ArrayList<>(2);
item.add(nums1[m]);
item.add(nums2[n]);
results.add(item);
}
results.sort(Comparator.comparing(pair->pair.get(0) + pair.get(1)));
return results.stream().limit(k).collect(Collectors.toList());
}
Key to eliminate O(n^2):
Avoid cartesian product(or 'cross join' like operation) of both arrays, which means flattening the nested loop.
Downsize iteration over the 2 arrays.
So:
Sort both arrays (Arrays.sort offers O(n log(n)) performance according to Java doc)
Limit the iteration range to the size which is just big enough to support k smallest pairs searching.
I have an Algorithm course this semester. Everything is fine until I reached the lecture about Order Statistics.
Here is the first slide of that lecture:
Order Statistics
Select the ith smallest of n elements (the
element with rank i).
• i = 1: minimum;
• i = n: maximum;
• i = ⎣(n+1)/2⎦ or ⎡(n+1)/2⎤: median.
Naive algorithm: Sort and index ith element.
Worst-case running time = Θ(n lg n) + Θ(1)
= Θ(n lg n)
I cannot understand what are the following:
What is Order Statistics?
What does it mean on the ith smallest of n eleents? please I need an example to know what is "ith"!!
Any simple explanation about these?
All I know is that this is related to Divide and Conquer, because the next slide is about it :).
"Order statistics" is a fancy name for "K-th element of an N-element sequence sorted in ascending order". The rest of the slide simply illustrates the idea, explaining that 1-order statistics is the smallest element in a sequence, n-order statistics is the largest element, n/2 order statistics is the median, and so on.
it order statistic is the same as the ith smallest element in an array. For example lets say we have an array A[Size] ={ 3,4,-3,-2,0, 1,10,2,14} and we want the element that corresponds to the 4th. Order statistic then we our function or program will return the value 1. The algorithm for this utilizes a random partition and recursive calls to the random selection function.
The pseudo code is as follows:
RSelect( Array[], p,r, i)
if p == r
return A[p]
q = RandomPartition(Array[],p,r)
k = q - p + 1
if i == k // case that the pivot is the answer
return Array[q]
else if i<k
return RSelect(Array,p, q-1,i)
else
return RSelect(Array, q+1, r, i-k)
The algorithm is a divide an conquer algorithm that uses recursion to break up the problem by choosing a random pivot which is done in the random partition function to assist in partitioning the array and throw out values that are either greater than or less than the pivot depending on whether the ith Order statistic is greater than or less than the pivot. For example if the it order statistic is less than the pivot it will discard values greater than the pivot. because the pivot value returned in the Partition function is in it's proper place.
I have an interview question that I can't seem to figure out. Given an array of size N, find the subset of size k such that the elements in the subset are the furthest apart from each other. In other words, maximize the minimum pairwise distance between the elements.
Example:
Array = [1,2,6,10]
k = 3
answer = [1,6,10]
The bruteforce way requires finding all subsets of size k which is exponential in runtime.
One idea I had was to take values evenly spaced from the array. What I mean by this is
Take the 1st and last element
find the difference between them (in this case 10-1) and divide that by k ((10-1)/3=3)
move 2 pointers inward from both ends, picking out elements that are +/- 3 from your previous pick. So in this case, you start from 1 and 10 and find the closest elements to 4 and 7. That would be 6.
This is based on the intuition that the elements should be as evenly spread as possible. I have no idea how to prove it works/doesn't work. If anyone knows how or has a better algorithm please do share. Thanks!
This can be solved in polynomial time using DP.
The first step is, as you mentioned, sort the list A. Let X[i,j] be the solution for selecting j elements from first i elements A.
Now, X[i+1, j+1] = max( min( X[k,j], A[i+1]-A[k] ) ) over k<=i.
I will leave initialization step and memorization of subset step for you to work on.
In your example (1,2,6,10) it works the following way:
1 2 6 10
1 - - - -
2 - 1 5 9
3 - - 1 4
4 - - - 1
The basic idea is right, I think. You should start by sorting the array, then take the first and the last elements, then determine the rest.
I cannot think of a polynomial algorithm to solve this, so I would suggest one of the two options.
One is to use a search algorithm, branch-and-bound style, since you have a nice heuristic at hand: the upper bound for any solution is the minimum size of the gap between the elements picked so far, so the first guess (evenly spaced cells, as you suggested) can give you a good baseline, which will help prune most of the branches right away. This will work fine for smaller values of k, although the worst case performance is O(N^k).
The other option is to start with the same baseline, calculate the minimum pairwise distance for it and then try to improve it. Say you have a subset with minimum distance of 10, now try to get one with 11. This can be easily done by a greedy algorithm -- pick the first item in the sorted sequence such that the distance between it and the previous item is bigger-or-equal to the distance you want. If you succeed, try increasing further, if you fail -- there is no such subset.
The latter solution can be faster when the array is large and k is relatively large as well, but the elements in the array are relatively small. If they are bound by some value M, this algorithm will take O(N*M) time, or, with a small improvement, O(N*log(M)), where N is the size of the array.
As Evgeny Kluev suggests in his answer, there is also a good upper bound on the maximum pairwise distance, which can be used in either one of these algorithms. So the complexity of the latter is actually O(N*log(M/k)).
You can do this in O(n*(log n) + n*log(M)), where M is max(A) - min(A).
The idea is to use binary search to find the maximum separation possible.
First, sort the array. Then, we just need a helper function that takes in a distance d, and greedily builds the longest subarray possible with consecutive elements separated by at least d. We can do this in O(n) time.
If the generated array has length at least k, then the maximum separation possible is >=d. Otherwise, it's strictly less than d. This means we can use binary search to find the maximum value. With some cleverness, you can shrink the 'low' and 'high' bounds of the binary search, but it's already so fast that sorting would become the bottleneck.
Python code:
def maximize_distance(nums: List[int], k: int) -> List[int]:
"""Given an array of numbers and size k, uses binary search
to find a subset of size k with maximum min-pairwise-distance"""
assert len(nums) >= k
if k == 1:
return [nums[0]]
nums.sort()
def longest_separated_array(desired_distance: int) -> List[int]:
"""Given a distance, returns a subarray of nums
of length k with pairwise differences at least that distance (if
one exists)."""
answer = [nums[0]]
for x in nums[1:]:
if x - answer[-1] >= desired_distance:
answer.append(x)
if len(answer) == k:
break
return answer
low, high = 0, (nums[-1] - nums[0])
while low < high:
mid = (low + high + 1) // 2
if len(longest_separated_array(mid)) == k:
low = mid
else:
high = mid - 1
return longest_separated_array(low)
I suppose your set is ordered. If not, my answer will be changed slightly.
Let's suppose you have an array X = (X1, X2, ..., Xn)
Energy(Xi) = min(|X(i-1) - Xi|, |X(i+1) - Xi|), 1 < i <n
j <- 1
while j < n - k do
X.Exclude(min(Energy(Xi)), 1 < i < n)
j <- j + 1
n <- n - 1
end while
$length = length($array);
sort($array); //sorts the list in ascending order
$differences = ($array << 1) - $array; //gets the difference between each value and the next largest value
sort($differences); //sorts the list in ascending order
$max = ($array[$length-1]-$array[0])/$M; //this is the theoretical max of how large the result can be
$result = array();
for ($i = 0; i < $length-1; $i++){
$count += $differences[i];
if ($length-$i == $M - 1 || $count >= $max){ //if there are either no more coins that can be taken or we have gone above or equal to the theoretical max, add a point
$result.push_back($count);
$count = 0;
$M--;
}
}
return min($result)
For the non-code people: sort the list, find the differences between each 2 sequential elements, sort that list (in ascending order), then loop through it summing up sequential values until you either pass the theoretical max or there arent enough elements remaining; then add that value to a new array and continue until you hit the end of the array. then return the minimum of the newly created array.
This is just a quick draft though. At a quick glance any operation here can be done in linear time (radix sort for the sorts).
For example, with 1, 4, 7, 100, and 200 and M=3, we get:
$differences = 3, 3, 93, 100
$max = (200-1)/3 ~ 67
then we loop:
$count = 3, 3+3=6, 6+93=99 > 67 so we push 99
$count = 100 > 67 so we push 100
min(99,100) = 99
It is a simple exercise to convert this to the set solution that I leave to the reader (P.S. after all the times reading that in a book, I've always wanted to say it :P)