I've tried to build SELinux utilities from source code:
root#linuxmint21 ~/linux/src # git clone --depth 1 https://github.com/SELinuxProject/selinux
root#linuxmint21 ~/linux/src # git clone --depth 1 https://github.com/SELinuxProject/cil secilc
root#linuxmint21 ~/linux/src # cd selinux
root#linuxmint21 ~/linux/src/selinux # make -j12 V=1
But I have got an error: https://pastebin.com/bfWBTYJw
Then I've tried to build secilc:
root#linuxmint21 ~/linux/src/secilc # make -j12 V=1
Error: https://pastebin.com/BuVqWfse
There was a problem with file sepol/policydb/flask.h (File didn't exist), there was need usage this file from Android headers:
root#linuxmint21 ~/linux/src/secilc # apt install android-libsepol-dev
I'm need only policy compiler, nothing more. If I can't build it from source - OK, I'll try to write utility for building policy. I know about libsepol, but I don't understand how use it.
I read secilc and sedump source code... I didn't understand how can I build policy to binary file programatically... When I analyzed sepolicy file from my phone, then I've understood only some things. There is a magic bytes of sepolicy file, rules are written in binary format, but I can read contexts and available actions (read, write, mount, etc). (I used xxd sepolicy for reading). But I'm really need info how can I compile SELinux policy or build SELinux tools from source...
sorry if my english is not very good
I want to understand how can I build SELinux utilities from source or how can I compile SELinux policy
Related
I am trying to modify one of the CentOS (7.6) kernel source file and recompile all of them for later installation.
I followed the guide on wiki.centos to do customized kernel:
https://wiki.centos.org/HowTos/Custom_Kernel
I found that in step 5, the RPM method always unpacked source files from tar files and replaced my modification in BUILD/.
Therefore, I changed my way. I put my modification at another place and added a line in kernel.spec file under SPECS/ to copy my file into the BUILD/. Namely, one-line with cp command is put before %build in the kernel.spec (after unpacked). However, the compilation went wrong in the %build section:
...
Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.Vd6by5
BUILDING A KERNEL FOR x86_64...
USING ARCH=x86_64
...
###
### Now generating an X.509 key pair to be used for signing modules.
###
### If this takes a long time, you might wish to run rngd in the
### background to keep the supply of entropy topped up. It
### needs to be run as root, and uses a hardware random
### number generator if one is available.
###
Generating a 3072 bit RSA private key
....++
......................................................................................................................................................................................++
writing new private key to 'signing_key.priv'
-----
###
### Key pair generated.
###
- Including cert /home/user/rpmbuild/BUILD/kernel-3.10.0-957.12.2.el7/linux-3.10.0-957.12.2.el7.v2.x86_64/centos-kpatch.x509
- Including cert /home/user/rpmbuild/BUILD/kernel-3.10.0-957.12.2.el7/linux-3.10.0-957.12.2.el7.v2.x86_64/centos-ldup.x509
- Including cert signing_key.x509
RPM build errors:
Could somebody suggest me a better way to replace the source file in the compilation procedure?
Thanks.
I found the solution myself. Instead of directly replacing files, we should apply patch within RPM to indicate the differences between modified file and original file.
Firstly, use diff command to build patch. Then, modify spec file, kernel.spec, applying the patch to the building procedure.
This website shows the example when using this way to compile kernel:
https://www.hiroom2.com/2016/05/29/centos-7-rebuild-kernel-with-src-rpm/
A more clear reference for patching files:
https://rpm-packaging-guide.github.io/#patching-software
I tried to play video with gstreamer-1.0 on buildroot. I opened elements of gstreamer on buildroot. But when I use gst-inspect command, I can not find elements what actived on buildroot. For example I activated videotestsrc. When I want use this element, I take no such element or plugin 'videotestsrc' error.
Also I tried export library. I used this command:
export LD_LIBRARY_PATH=/usr/bin/gstreamer-1.0
export GST_PLUGIN_PATH=/usr/bin/gstreamer-1.0
export GST_PLUGIN_1_0
but result did not change. How can I fix this? How can I work gstreamer-1.0 on buildoot?
Note: Buildroot 2019.05-rc1, kernel 5.0.14, u-boot 2017-05, microprocess Allwinner A13
Update(16.05.2019)
defconfig:
BR2_arm=y
BR2_cortex_a8=y
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_TARGET_GENERIC_HOSTNAME="GenOS"
BR2_TARGET_GENERIC_ISSUE="Welcome to Mega7"
BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
BR2_ROOTFS_POST_BUILD_SCRIPT="board/olimex/a13_olinuxino/post-build.sh"
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/olimex/a13_olinuxino/genimage.cfg"
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.5"
BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun5i-a13-olinuxino"
BR2_LINUX_KERNEL_INSTALL_TARGET=y
BR2_PACKAGE_ALSA_UTILS=y
BR2_PACKAGE_FFMPEG_FFPLAY=y
BR2_PACKAGE_FFMPEG_AVRESAMPLE=y
BR2_PACKAGE_GSTREAMER1=y
BR2_PACKAGE_GST1_PLUGINS_GOOD=y
BR2_PACKAGE_GST1_PLUGINS_BAD=y
BR2_PACKAGE_GST1_PLUGINS_UGLY=y
BR2_PACKAGE_GST1_INTERPIPE=y
BR2_PACKAGE_GST1_LIBAV=y
BR2_PACKAGE_DIRECTFB=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
BR2_PACKAGE_MESA3D_OPENGL_ES=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_XAPP_SETXKBMAP=y
BR2_PACKAGE_XAPP_TWM=y
BR2_PACKAGE_XAPP_XCLOCK=y
BR2_PACKAGE_XAPP_XINIT=y
BR2_PACKAGE_XAPP_XRANDR=y
BR2_PACKAGE_XDRIVER_XF86_INPUT_KEYBOARD=n
BR2_PACKAGE_XDRIVER_XF86_INPUT_MOUSE=y
BR2_PACKAGE_XDRIVER_XF86_VIDEO_FBDEV=y
BR2_PACKAGE_XDRIVER_XF86_VIDEO_FBTURBO=y
BR2_PACKAGE_XTERM=y
BR2_PACKAGE_OPENBOX=y
BR2_PACKAGE_PYTHON=y
BR2_PACKAGE_LIBDRM_NOUVEAU=y
BR2_PACKAGE_LIBGTK3=y
# BR2_PACKAGE_LIBGTK3_BROADWAY is not set
# BR2_PACKAGE_LIBGTK3_WAYLAND is not set
BR2_PACKAGE_LIBGTK3_DEMO=y
BR2_PACKAGE_LIBSERIALPORT=y
BR2_PACKAGE_SCREEN=y
BR2_PACKAGE_SUDO=y
BR2_PACKAGE_HTOP=y
BR2_PACKAGE_NANO=y
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
BR2_TARGET_ROOTFS_EXT2_SIZE="300M"
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.05"
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="A13-OLinuXino"
BR2_TARGET_UBOOT_NEEDS_DTC=y
BR2_TARGET_UBOOT_SPL=y
BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
BR2_TARGET_UBOOT_BOOT_SCRIPT=y
BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/olimex/a13_olinuxino/boot.cmd"
BR2_PACKAGE_HOST_DOSFSTOOLS=y
BR2_PACKAGE_HOST_GENIMAGE=y
BR2_PACKAGE_HOST_MTOOLS=y
BR2_PACKAGE_HOST_UBOOT_TOOLS=y
Thanks.
What is your buildroot configuration exactly? (run make savedefconfig and paste the defconfig file here). Notice that Buildroot will not notice changes to the many gst1-plugins-* options after you have done a build, so you need to do a clean build (make clean; make) for the changes to take effect.
See the manual for details:
https://buildroot.org/downloads/manual/manual.html#full-rebuild
I'm using Buildroot 2018.02.7 to build a simple Linux system for i386 PC, as a precursor to doing the same thing for an embedded ARM system. I keep running into problems like this one, in building the util-linux module:
CC lib/libcommon_la-path.lo
lib/pager.c:11:17: fatal error: err.h: No such file or directory
#include <err.h>
^
compilation terminated.
Makefile:8596: recipe for target 'lib/libcommon_la-pager.lo' failed
make[3]: *** [lib/libcommon_la-pager.lo] Error 1
When I look in the linux-headers source tree in .../output/build/linux-headers-4.13.8, the file is found. But Buildroot is pointing to a different set of headers, the one built into its GCC:
devuser#3faf730b4a1b:~/pc/buildroot-2018.02.7/output/build/util-linux-2.31.1$ ../../host/bin/i686-buildroot-linux-uclibc-gcc -print-sysroot
/home/devuser/pc/buildroot-2018.02.7/output/host/i686-buildroot-linux-uclibc/sysroot
devuser#3faf730b4a1b:~/pc/buildroot-2018.02.7/output/build/util-linux-2.31.1$
And the two /usr/include subdirectories are significantly different.
Have I missed a configuration setting somewhere in the defconfig file? This is the defconfig:
BR2_x86_core2=y
BR2_SSP_REGULAR=y
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_13=y
BR2_UCLIBC_CONFIG="board/pc/dsa_pc_i386_uclibc.config"
BR2_TOOLCHAIN_BUILDROOT_USE_SSP=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_TARGET_GENERIC_GETTY_PORT="tty1"
BR2_ROOTFS_POST_IMAGE_SCRIPT="board/pc/post-image.sh support/scripts/genimage.sh"
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pc/genimage-bios.cfg"
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.13.8"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/pc/linux.config"
BR2_LINUX_KERNEL_INSTALL_TARGET=y
BR2_LINUX_KERNEL_EXT_XENOMAI=y
BR2_PACKAGE_BUSYBOX_CONFIG="board/pc/dsa_pc_i386_busybox.config"
BR2_PACKAGE_LINUX_FIRMWARE=y
BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_9170=y
BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_9271=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3160=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3168=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_5000=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_6000G2A=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_6000G2B=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_7260=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_7265D=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_8000C=y
BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_8265=y
BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73=y
BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y
BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX=y
BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX=y
BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX=y
BR2_PACKAGE_LINUX_FIRMWARE_RTL_8169=y
BR2_PACKAGE_ACPID=y
BR2_PACKAGE_DBUS=y
BR2_PACKAGE_ZLIB=y
BR2_PACKAGE_LIBFFI=y
BR2_PACKAGE_PCRE=y
BR2_PACKAGE_PCRE_UCP=y
BR2_PACKAGE_READLINE=y
BR2_PACKAGE_WPA_SUPPLICANT=y
BR2_PACKAGE_WPA_SUPPLICANT_DBUS_NEW=y
BR2_PACKAGE_KMOD=y
BR2_PACKAGE_UTIL_LINUX=y
BR2_PACKAGE_UTIL_LINUX_LIBMOUNT=y
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
# BR2_TARGET_ROOTFS_TAR is not set
BR2_PACKAGE_HOST_GENIMAGE=y
Enable UCLIBC_HAS_BSD_ERR in uClibc.
You have a custom uClibc configuration. That falls squarely in the "you know what you are doing" category, since it allows you to remove features that other packages rely on.
In this case, util-linux relies on the non-Posix err.h include. This is only installed if UCLIBC_HAS_BSD_ERR is enabled in the uClibc configuration.
There is a high risk of running into similar issues with a custom uClibc configuration.
More details below, but I'm running into the following error when I issue a composer install or composer update command on a project which uses a custom VCS repository for an included project. This is on an IBM i v7r3 system via SSH session. I've run out of ideas on how to troubleshoot further, so here I am. Has anyone ever seen this error or have any ideas on how to troubleshoot further?
Error:
bash-4.4$ composer install
Loading composer repositories with package information
Installing dependencies (including require-dev) from lock file
Package operations: 113 installs, 0 updates, 0 removals
- Installing sshUser/myPackage (v1.0.26): Cloning a2db0666b1
[RuntimeException]
Failed to clone gitUser:/opt/git/myPackage.git, git was not found, check that
it is installed and in your PATH env.
Could not load program git:
Dependent module /usr/local/zendphp7/lib/libz.so.1(shr_64.o) could not be loaded.
File /usr/local/zendphp7/lib/libz.so.1 is not an
archive or the file could not be read properly.
System error: Exec format error
I have a remote IBM i server which has two users. The first user "gitUser" is used for my private Git repositories (headless). I then have another user "sshUser" which is used to SSH in with and do my typical work. I have SSH keys configured to simplify connections for both users and the "gitUser" ssh key doesn't require a password, so I can use it for automated scripting.
I have a private VCS repository included in my composer.json file for a project. So long as I have the entry in the "repository" section I'm getting the above error. This occurs even if I'm not requireing a package from the repository.
Repository Entry:
"repositories": [
{
"type": "vcs",
"url": "gitUser:/opt/git/myPackage.git"
}
]
Composer on the IBM i is up to date at 1.7.2.
It's clear the issue lies with git and the inability to find a dependency in libz.so.1.
However, if I follow the chain of dependencies for the version of Git in my path, all the appropriate files exist with adequate permissions:
bash-4.4$ which git
/QOpenSys/pkgs/bin/git
bash-4.4$ dump -X64 -H /QOpenSys/pkgs/bin/git
/QOpenSys/pkgs/bin/git:
***Loader Section***
Loader Header Information
VERSION# #SYMtableENT #RELOCent LENidSTR
0x00000001 0x000000df 0x0000433f 0x0000009d
#IMPfilID OFFidSTR LENstrTBL OFFstrTBL
0x00000006 0x00044910 0x00000a18 0x000449ad
***Import File Strings***
INDEX PATH BASE MEMBER
0 /QOpenSys/pkgs/lib:/QOpenSys/usr/lib
1 libz.so.1 shr_64.o
2 libiconv.so.2 shr_64.o
3 libcrypto.so.1.0.0 shr_64.o
4 libpthread.a shr_xpg5_64.o
5 libc.a shr_64.o
bash-4.4$
I can confirm there are no permission failures through out all of this. So this doesn't seem to be the result of inadequate permissions. Also, I do not think the issue lies within the user profile gitUser as if I issue a composer install or composer update from another machine (with appropriate keys), everything works flawlessly. So it seems to be specific to the IBM i and the sshUser profile.
I'm starting to think Composer is using a different git executable and the dependencies of that executable do not exist. Though I assume Composer would just use my path.
Note*: I tried specifying my LIBPATH in my ./.profile with the following. But it doesn't seem to make any difference:
LIBPATH=/usr/local/zendphp7/lib
LIBPATH=$LIBPATH:/QOpenSys/pkgs/lib:/QOpenSys/usr/lib
export LIBPATH
When echoing:
bash-4.4$ echo $LIBPATH
/usr/local/zendphp7/lib:/QOpenSys/pkgs/lib:/QOpenSys/usr/lib
bash-4.4$
If I don't add the above to my ./.profile, then echo $LIBPATH prints a blank line to screen.
Solution:
I just changed the symlink in the ZENDPHP7 directory structure to the repo version. Alternatively you can manipulate your library path, but I couldn't figure out the proper way to do it on IBM i.
bash-4.4$ pwd
/usr/local/zendphp7/lib
bash-4.4$ ln -s /QOpenSys/pkgs/lib/libz.so.1 ./libz.so.1
bash-4.4$ ls -la /usr/local/zendphp7/lib/libz.so.1
lrwxrwxrwx 1 dl 0 56 Oct 11 14:21 /usr/local/zendphp7/lib/libz.so.1 -> /QOpenSys/pkgs/lib/libz.so.1
bash-4.4$
I'm guessing something is off with your path when you do the install. Is it maybe looking at the Zend PHP libraries rather than the expected ones in /usr/lib?
Notice that the errors shows a path of /usr/local/zendphp7/lib/ libz.so.1(shr_64.o) while your git dump instead shows /QOpenSys/pkgs/lib:/QOpenSys/usr/lib.
I'm having trouble getting the Windows build agent to run a build. The agent is unable to checkout my source code. (Im using Windows 10) See GitHub issue
I am seeing the following error when running a build:
Buildkite Error: There was an error running `git clone -v -- git#github.com:myorg/myrepo.git .` (exec: "git": executable file not found in %PATH%)
I have installed git using chocolatey and git is accessible in CMD and Powershell on the agent's host and I can see it in my path if I run gci env:Path in Powershell. git's directory is at the end here:
C:\Program Files\Docker\Docker\Resources\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Git\cm...
From a build's logs in BK's web UI, I see the following environment variables printed out:
BUILDKITE=true
BUILDKITE_AGENT_ACCESS_TOKEN=xxx
BUILDKITE_AGENT_DEBUG=true
BUILDKITE_AGENT_ENDPOINT=https://agent.buildkite.com/v3
BUILDKITE_AGENT_ID=xxx
BUILDKITE_AGENT_NAME=DESKTOP-1
BUILDKITE_AGENT_PID=5180
BUILDKITE_ARTIFACT_PATHS=
BUILDKITE_BIN_PATH=C:\Users\Jason\Downloads\buildkite-agent-windows-amd64-3.0-beta.27
BUILDKITE_BRANCH=fix/build
BUILDKITE_BUILD_CHECKOUT_PATH=builds\DESKTOP-1\myorg\myrepo
BUILDKITE_BUILD_CREATOR=Jason
BUILDKITE_BUILD_CREATOR_EMAIL=myemail#gmail.com
BUILDKITE_BUILD_ID=xxx
BUILDKITE_BUILD_NUMBER=18
BUILDKITE_BUILD_PATH=builds
BUILDKITE_BUILD_URL=https://buildkite.com/myorg/myrepo/builds/18
BUILDKITE_COMMAND=msbuild
BUILDKITE_COMMAND_EVAL=true
BUILDKITE_COMMIT=HEAD
BUILDKITE_GIT_CLEAN_FLAGS=-fxdq
BUILDKITE_GIT_CLONE_FLAGS=-v
BUILDKITE_HOOKS_PATH=hooks
BUILDKITE_JOB_ID=xxx
BUILDKITE_MESSAGE=First build
BUILDKITE_ORGANIZATION_SLUG=myorg
BUILDKITE_PIPELINE_DEFAULT_BRANCH=master
BUILDKITE_PIPELINE_PROVIDER=github
BUILDKITE_PIPELINE_SLUG=myrepo
BUILDKITE_PLUGINS_PATH=plugins
BUILDKITE_PROJECT_PROVIDER=github
BUILDKITE_PROJECT_SLUG=myorg/myrepo
BUILDKITE_PULL_REQUEST=false
BUILDKITE_PULL_REQUEST_REPO=
BUILDKITE_REPO=git#github.com:myorg/myrepo.git
BUILDKITE_REPO_SSH_HOST=github.com
BUILDKITE_RETRY_COUNT=0
BUILDKITE_SCRIPT_PATH=msbuild
BUILDKITE_SOURCE=ui
BUILDKITE_SSH_FINGERPRINT_VERIFICATION=true
BUILDKITE_TAG=
BUILDKITE_TIMEOUT=false
CI=true
PATH=C:\Users\Jason\Downloads\buildkite-agent-windows-amd64-3.0-beta.27;
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC;.CPL
Note that PATH in that output is not the same as my PATH from the Powershell and does not include the path to gits binary.
Full build output:
Build environment variables 0s
BUILDKITE=true
BUILDKITE_AGENT_ACCESS_TOKEN=xxx
BUILDKITE_AGENT_DEBUG=true
BUILDKITE_AGENT_ENDPOINT=https://agent.buildkite.com/v3
BUILDKITE_AGENT_ID=xxx
BUILDKITE_AGENT_NAME=DESKTOP-1
BUILDKITE_AGENT_PID=5180
BUILDKITE_ARTIFACT_PATHS=
BUILDKITE_BIN_PATH=C:\Users\Jason\Downloads\buildkite-agent-windows-amd64-3.0-beta.27
BUILDKITE_BRANCH=fix/build
BUILDKITE_BUILD_CHECKOUT_PATH=builds\DESKTOP-1\myorg\myrepo
BUILDKITE_BUILD_CREATOR=Jason
BUILDKITE_BUILD_CREATOR_EMAIL= myemail#gmail.com
BUILDKITE_BUILD_ID=xxx
BUILDKITE_BUILD_NUMBER=18
BUILDKITE_BUILD_PATH=builds
BUILDKITE_BUILD_URL=https://buildkite.com/myorg/myrepo/builds/18
BUILDKITE_COMMAND=msbuild
BUILDKITE_COMMAND_EVAL=true
BUILDKITE_COMMIT=HEAD
BUILDKITE_GIT_CLEAN_FLAGS=-fxdq
BUILDKITE_GIT_CLONE_FLAGS=-v
BUILDKITE_HOOKS_PATH=hooks
BUILDKITE_JOB_ID=xxx
BUILDKITE_MESSAGE=First build
BUILDKITE_ORGANIZATION_SLUG=myorg
BUILDKITE_PIPELINE_DEFAULT_BRANCH=master
BUILDKITE_PIPELINE_PROVIDER=github
BUILDKITE_PIPELINE_SLUG=myrepo
BUILDKITE_PLUGINS_PATH=plugins
BUILDKITE_PROJECT_PROVIDER=github
BUILDKITE_PROJECT_SLUG=myorg/myrepo
BUILDKITE_PULL_REQUEST=false
BUILDKITE_PULL_REQUEST_REPO=
BUILDKITE_REPO=git#github.com:myorg/myrepo.git
BUILDKITE_REPO_SSH_HOST=github.com
BUILDKITE_RETRY_COUNT=0
BUILDKITE_SCRIPT_PATH=msbuild
BUILDKITE_SOURCE=ui
BUILDKITE_SSH_FINGERPRINT_VERIFICATION=true
BUILDKITE_TAG=
BUILDKITE_TIMEOUT=false
CI=true
PATH=C:\Users\Jason\Downloads\buildkite-agent-windows-amd64-3.0-beta.27;
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC;.CPL
Running global environment hook 0s
# Skipping, no hook script found at "hooks\environment.bat"
Running global pre-checkout hook 0s
# Skipping, no hook script found at "hooks\pre-checkout.bat"
Preparing build directory 0s
# Changing working directory to "builds\DESKTOP-1\myorg\myrepo"
⚠ Buildkite Warning: Could not performn `ssh-keygen` (exec: "ssh-keygen": executable file not found in %PATH%)
> git clone -v -- git#github.com:myorg/myrepo.git .
🚨 Buildkite Error: There was an error running `git clone -v -- git#github.com:myorg/myrepo.git .` (exec: "git": executable file not found in %PATH%)
Your build output doesn't seem to have those chocolatey paths:
PATH=C:\Users\Jason\Downloads\buildkite-agent-windows-amd64-3.0-beta.27;
You might need to add an agent environment hook which adds the right directories to the path. Or try updating to the latest beta which might fix the issue.