I was watching a lecture on the question "subsequence sum equals to k" in which you're given an array of n positive integers and a target sum = k. Your task is to check if any of the subsequence of the array have a sum equal to the target sum. The recursive solution works in O(2^N). The lecturer said that if we memoize the recursive solution, the time complexity will drop to O(N*K). But as much as I understand, memoization simply removes overlapping subproblems. So if all of the subsequences have different sum, won't the time complexity of the solution still be O(2^N)? Just to test this hypothesis, I was trying to create an array of n positive integers where none of the subsequences have equal sum.
Also, I tried the tabulation method and was unable to understand why the time complexity drops in the case of tabulation. Please point to any resource where I can learn exactly what subproblems does tabulation avoid.
Note that O(NK) is not always smaller than O(2N). If K = 2N for example, then O(KN) = O(N * 2N), which is larger.
Furthermore, this is the sort of range you're dealing with when every subsequence sum is different.
If your N integers are powers of 2, for example: [20, 21, 22, ...], then every subsequence has a different sum, and K=2N is the smallest positive integer that isn't a subsequence sum.
The tabulation method is only an improvement when K is known to be relatively small.
If each value in the array is a different, positive power of the same base, no two sums will be equal.
Python code:
def f(A):
sums = set([0])
for a in A:
new_sums = set()
for s in sums:
new_sum = s + a
if new_sum in sums:
print(new_sum)
return None
new_sums.add(new_sum)
sums = sums.union(new_sums)
return sums
for b in range(2, 10):
A = []
for p in range(5):
A.append(b**p)
sums = f(A)
print(A)
print(len(sums))
print(sums)
In the recursive case without memoization, you'll compute the sums for all subsequences, which has O(2^N) complexity.
Now consider the memoization case.
Let dp[i][j] = 1 if there exists a subsequence in the array arr[i:] that has sum j, else dp[i][j] = 0.
The algorithm is
for each index i in range(n,0,-1):
j = array[i]
for each x in range(0,k):
dp[i][x] += dp[i+1][x]
if dp[i+1][x] == 1:
dp[i][x+j] = 1
return dp[0][k]
For each index, we traverse the subsequence sums seen till yet (in range k), and mark them True for the current index. For each such sum, we also add the value of the current element, and mark that True.
Which sub-problems were reduced?
We just track if sum x is possible in a subarray. In the recursive case, there could be 100 subsequences that have sum x. Here, since we're using a bool to track if x is possible in the subarray, we effectively avoid going over all subsequences just to check if the sum is possible.
For each index, since we do a O(k) traversal of going through all sums, the complexity becomes O(N*k).
Related
Given an integer array a, and an integer k, we want to design an algorithm to count the number of subarrays with the average of that subarray being k. The most naive method is to traverse all possible subarrays and calculate the corresponding average. The time complexity of this naive method is O(n^2) where $n$ is the length of a. I wonder whether it is possible to do better than O(n^2).
Usually for this kind of problem, one uses prefix sum together with a hashmap, but this technique does not seem to apply here.
Consider a prefix sum array, call it a.
You want to find all such pairs (i, j) that (a[j]-a[i])/(j-i) == k.
Now watch the hands:
(a[j]-a[i])/(j-i) == k
a[j]-a[i] == k*(j-i)
a[j]-a[i] == k*j-k*i
a[j]-k*j == a[i]-k*i
So if you subtract k*j from jth element of the prefix sum array, you are left with the task of counting identical pairs.
I have to find an algorithm for the following problem:
input are two numbers S and k of natural numbers and an unsorted set of n pair-wise different numbers.
decide in O(n) if there is a subset of k numbers that sum up to <=S. Note: k should not be part of the time complexity.
algorithm({x_1, ..., x_n}, k, S):
if exists |{x_i, ..., x_j}| = k and x_i + ... x_j <= S return true
I don't find a solution with time complexity O(n).
What I was able to get is in O(kn), as we search k times the minimum and sum is up:
algorithm(a={x_1, ..., x_n}, k, S):
sum = 0
for i=1,...,k:
min = a.popFirst()
for i=2,...,len(a):
if(a[i] < min):
t = a[i]
a[i] = min
min = t
sum += min
if sum <= S:
return true
else:
return false
this is in O(n) and return the right result. How can i loose the k?
Thanks for helping me, im really struggeling on this one!
Quickselect can be used to find the k smallest elements: https://en.wikipedia.org/wiki/Quickselect
It's basically quicksort, except that you only recurse on the interesting side of the pivot.
A simple implementation runs in O(N) expected time, but using median-of-medians to select a pivot, you can make that a real worst-case bound: https://en.wikipedia.org/wiki/Median_of_medians
You could build a min-heap of size k from the set. Time complexity of building this is O(n) expected time and O(n log k) worst case.
The heap should contain first k minimum elements from the set.
Then it is straightforward to see the sum of the elements in the heap is <= S. You don't need to remove the elements from the heap to calculate the sum. Just traverse the heap to calculate sum. Removing all elements entails k log k complexity.
You don't even need to consider the next higher elements, because adding them would result in sum greater than S
Given two sorted arrays of numbers, we want to find the pair with the kth largest possible sum. (A pair is one element from the first array and one element from the second array). For example, with arrays
[2, 3, 5, 8, 13]
[4, 8, 12, 16]
The pairs with largest sums are
13 + 16 = 29
13 + 12 = 25
8 + 16 = 24
13 + 8 = 21
8 + 12 = 20
So the pair with the 4th largest sum is (13, 8). How to find the pair with the kth largest possible sum?
Also, what is the fastest algorithm? The arrays are already sorted and sizes M and N.
I am already aware of the O(Klogk) solution , using Max-Heap given here .
It also is one of the favorite Google interview question , and they demand a O(k) solution .
I've also read somewhere that there exists a O(k) solution, which i am unable to figure out .
Can someone explain the correct solution with a pseudocode .
P.S.
Please DON'T post this link as answer/comment.It DOESN'T contain the answer.
I start with a simple but not quite linear-time algorithm. We choose some value between array1[0]+array2[0] and array1[N-1]+array2[N-1]. Then we determine how many pair sums are greater than this value and how many of them are less. This may be done by iterating the arrays with two pointers: pointer to the first array incremented when sum is too large and pointer to the second array decremented when sum is too small. Repeating this procedure for different values and using binary search (or one-sided binary search) we could find Kth largest sum in O(N log R) time, where N is size of the largest array and R is number of possible values between array1[N-1]+array2[N-1] and array1[0]+array2[0]. This algorithm has linear time complexity only when the array elements are integers bounded by small constant.
Previous algorithm may be improved if we stop binary search as soon as number of pair sums in binary search range decreases from O(N2) to O(N). Then we fill auxiliary array with these pair sums (this may be done with slightly modified two-pointers algorithm). And then we use quickselect algorithm to find Kth largest sum in this auxiliary array. All this does not improve worst-case complexity because we still need O(log R) binary search steps. What if we keep the quickselect part of this algorithm but (to get proper value range) we use something better than binary search?
We could estimate value range with the following trick: get every second element from each array and try to find the pair sum with rank k/4 for these half-arrays (using the same algorithm recursively). Obviously this should give some approximation for needed value range. And in fact slightly improved variant of this trick gives range containing only O(N) elements. This is proven in following paper: "Selection in X + Y and matrices with sorted rows and columns" by A. Mirzaian and E. Arjomandi. This paper contains detailed explanation of the algorithm, proof, complexity analysis, and pseudo-code for all parts of the algorithm except Quickselect. If linear worst-case complexity is required, Quickselect may be augmented with Median of medians algorithm.
This algorithm has complexity O(N). If one of the arrays is shorter than other array (M < N) we could assume that this shorter array is extended to size N with some very small elements so that all calculations in the algorithm use size of the largest array. We don't actually need to extract pairs with these "added" elements and feed them to quickselect, which makes algorithm a little bit faster but does not improve asymptotic complexity.
If k < N we could ignore all the array elements with index greater than k. In this case complexity is equal to O(k). If N < k < N(N-1) we just have better complexity than requested in OP. If k > N(N-1), we'd better solve the opposite problem: k'th smallest sum.
I uploaded simple C++11 implementation to ideone. Code is not optimized and not thoroughly tested. I tried to make it as close as possible to pseudo-code in linked paper. This implementation uses std::nth_element, which allows linear complexity only on average (not worst-case).
A completely different approach to find K'th sum in linear time is based on priority queue (PQ). One variation is to insert largest pair to PQ, then repeatedly remove top of PQ and instead insert up to two pairs (one with decremented index in one array, other with decremented index in other array). And take some measures to prevent inserting duplicate pairs. Other variation is to insert all possible pairs containing largest element of first array, then repeatedly remove top of PQ and instead insert pair with decremented index in first array and same index in second array. In this case there is no need to bother about duplicates.
OP mentions O(K log K) solution where PQ is implemented as max-heap. But in some cases (when array elements are evenly distributed integers with limited range and linear complexity is needed only on average, not worst-case) we could use O(1) time priority queue, for example, as described in this paper: "A Complexity O(1) Priority Queue for Event Driven Molecular Dynamics Simulations" by Gerald Paul. This allows O(K) expected time complexity.
Advantage of this approach is a possibility to provide first K elements in sorted order. Disadvantages are limited choice of array element type, more complex and slower algorithm, worse asymptotic complexity: O(K) > O(N).
EDIT: This does not work. I leave the answer, since apparently I am not the only one who could have this kind of idea; see the discussion below.
A counter-example is x = (2, 3, 6), y = (1, 4, 5) and k=3, where the algorithm gives 7 (3+4) instead of 8 (3+5).
Let x and y be the two arrays, sorted in decreasing order; we want to construct the K-th largest sum.
The variables are: i the index in the first array (element x[i]), j the index in the second array (element y[j]), and k the "order" of the sum (k in 1..K), in the sense that S(k)=x[i]+y[j] will be the k-th greater sum satisfying your conditions (this is the loop invariant).
Start from (i, j) equal to (0, 0): clearly, S(1) = x[0]+y[0].
for k from 1 to K-1, do:
if x[i+1]+ y[j] > x[i] + y[j+1], then i := i+1 (and j does not change) ; else j:=j+1
To see that it works, consider you have S(k) = x[i] + y[j]. Then, S(k+1) is the greatest sum which is lower (or equal) to S(k), and such as at least one element (i or j) changes. It is not difficult to see that exactly one of i or j should change.
If i changes, the greater sum you can construct which is lower than S(k) is by setting i=i+1, because x is decreasing and all the x[i'] + y[j] with i' < i are greater than S(k). The same holds for j, showing that S(k+1) is either x[i+1] + y[j] or x[i] + y[j+1].
Therefore, at the end of the loop you found the K-th greater sum.
tl;dr: If you look ahead and look behind at each iteration, you can start with the end (which is highest) and work back in O(K) time.
Although the insight underlying this approach is, I believe, sound, the code below is not quite correct at present (see comments).
Let's see: first of all, the arrays are sorted. So, if the arrays are a and b with lengths M and N, and as you have arranged them, the largest items are in slots M and N respectively, the largest pair will always be a[M]+b[N].
Now, what's the second largest pair? It's going to have perhaps one of {a[M],b[N]} (it can't have both, because that's just the largest pair again), and at least one of {a[M-1],b[N-1]}. BUT, we also know that if we choose a[M-1]+b[N-1], we can make one of the operands larger by choosing the higher number from the same list, so it will have exactly one number from the last column, and one from the penultimate column.
Consider the following two arrays: a = [1, 2, 53]; b = [66, 67, 68]. Our highest pair is 53+68. If we lose the smaller of those two, our pair is 68+2; if we lose the larger, it's 53+67. So, we have to look ahead to decide what our next pair will be. The simplest lookahead strategy is simply to calculate the sum of both possible pairs. That will always cost two additions, and two comparisons for each transition (three because we need to deal with the case where the sums are equal);let's call that cost Q).
At first, I was tempted to repeat that K-1 times. BUT there's a hitch: the next largest pair might actually be the other pair we can validly make from {{a[M],b[N]}, {a[M-1],b[N-1]}. So, we also need to look behind.
So, let's code (python, should be 2/3 compatible):
def kth(a,b,k):
M = len(a)
N = len(b)
if k > M*N:
raise ValueError("There are only %s possible pairs; you asked for the %sth largest, which is impossible" % M*N,k)
(ia,ib) = M-1,N-1 #0 based arrays
# we need this for lookback
nottakenindices = (0,0) # could be any value
nottakensum = float('-inf')
for i in range(k-1):
optionone = a[ia]+b[ib-1]
optiontwo = a[ia-1]+b[ib]
biggest = max((optionone,optiontwo))
#first deal with look behind
if nottakensum > biggest:
if optionone == biggest:
newnottakenindices = (ia,ib-1)
else: newnottakenindices = (ia-1,ib)
ia,ib = nottakenindices
nottakensum = biggest
nottakenindices = newnottakenindices
#deal with case where indices hit 0
elif ia <= 0 and ib <= 0:
ia = ib = 0
elif ia <= 0:
ib-=1
ia = 0
nottakensum = float('-inf')
elif ib <= 0:
ia-=1
ib = 0
nottakensum = float('-inf')
#lookahead cases
elif optionone > optiontwo:
#then choose the first option as our next pair
nottakensum,nottakenindices = optiontwo,(ia-1,ib)
ib-=1
elif optionone < optiontwo: # choose the second
nottakensum,nottakenindices = optionone,(ia,ib-1)
ia-=1
#next two cases apply if options are equal
elif a[ia] > b[ib]:# drop the smallest
nottakensum,nottakenindices = optiontwo,(ia-1,ib)
ib-=1
else: # might be equal or not - we can choose arbitrarily if equal
nottakensum,nottakenindices = optionone,(ia,ib-1)
ia-=1
#+2 - one for zero-based, one for skipping the 1st largest
data = (i+2,a[ia],b[ib],a[ia]+b[ib],ia,ib)
narrative = "%sth largest pair is %s+%s=%s, with indices (%s,%s)" % data
print (narrative) #this will work in both versions of python
if ia <= 0 and ib <= 0:
raise ValueError("Both arrays exhausted before Kth (%sth) pair reached"%data[0])
return data, narrative
For those without python, here's an ideone: http://ideone.com/tfm2MA
At worst, we have 5 comparisons in each iteration, and K-1 iterations, which means that this is an O(K) algorithm.
Now, it might be possible to exploit information about differences between values to optimise this a little bit, but this accomplishes the goal.
Here's a reference implementation (not O(K), but will always work, unless there's a corner case with cases where pairs have equal sums):
import itertools
def refkth(a,b,k):
(rightia,righta),(rightib,rightb) = sorted(itertools.product(enumerate(a),enumerate(b)), key=lamba((ia,ea),(ib,eb):ea+eb)[k-1]
data = k,righta,rightb,righta+rightb,rightia,rightib
narrative = "%sth largest pair is %s+%s=%s, with indices (%s,%s)" % data
print (narrative) #this will work in both versions of python
return data, narrative
This calculates the cartesian product of the two arrays (i.e. all possible pairs), sorts them by sum, and takes the kth element. The enumerate function decorates each item with its index.
The max-heap algorithm in the other question is simple, fast and correct. Don't knock it. It's really well explained too. https://stackoverflow.com/a/5212618/284795
Might be there isn't any O(k) algorithm. That's okay, O(k log k) is almost as fast.
If the last two solutions were at (a1, b1), (a2, b2), then it seems to me there are only four candidate solutions (a1-1, b1) (a1, b1-1) (a2-1, b2) (a2, b2-1). This intuition could be wrong. Surely there are at most four candidates for each coordinate, and the next highest is among the 16 pairs (a in {a1,a2,a1-1,a2-1}, b in {b1,b2,b1-1,b2-1}). That's O(k).
(No it's not, still not sure whether that's possible.)
[2, 3, 5, 8, 13]
[4, 8, 12, 16]
Merge the 2 arrays and note down the indexes in the sorted array. Here is the index array looks like (starting from 1 not 0)
[1, 2, 4, 6, 8]
[3, 5, 7, 9]
Now start from end and make tuples. sum the elements in the tuple and pick the kth largest sum.
public static List<List<Integer>> optimization(int[] nums1, int[] nums2, int k) {
// 2 * O(n log(n))
Arrays.sort(nums1);
Arrays.sort(nums2);
List<List<Integer>> results = new ArrayList<>(k);
int endIndex = 0;
// Find the number whose square is the first one bigger than k
for (int i = 1; i <= k; i++) {
if (i * i >= k) {
endIndex = i;
break;
}
}
// The following Iteration provides at most endIndex^2 elements, and both arrays are in ascending order,
// so k smallest pairs must can be found in this iteration. To flatten the nested loop, refer
// 'https://stackoverflow.com/questions/7457879/algorithm-to-optimize-nested-loops'
for (int i = 0; i < endIndex * endIndex; i++) {
int m = i / endIndex;
int n = i % endIndex;
List<Integer> item = new ArrayList<>(2);
item.add(nums1[m]);
item.add(nums2[n]);
results.add(item);
}
results.sort(Comparator.comparing(pair->pair.get(0) + pair.get(1)));
return results.stream().limit(k).collect(Collectors.toList());
}
Key to eliminate O(n^2):
Avoid cartesian product(or 'cross join' like operation) of both arrays, which means flattening the nested loop.
Downsize iteration over the 2 arrays.
So:
Sort both arrays (Arrays.sort offers O(n log(n)) performance according to Java doc)
Limit the iteration range to the size which is just big enough to support k smallest pairs searching.
Given an array of N positive integers. It can have n*(n+1)/2 sub-arrays including single element sub-arrays. Each sub-array has a sum S. Find S's for all sub-arrays is obviously O(n^2) as number of sub-arrays are O(n^2). Many sums S's may be repeated also. Is there any way to find count of all distinct sum (not the exact values of sums but only count) in O(n logn).
I tried an approach but stuck on the way. I iterated the array from index 1 to n.
Say a[i] is the given array. For each index i, a[i] will add to all the sums in which a[i-1] is involved and will include itself also as individual element. But duplicate will emerge if among sums in which a[i-1] is involved, the difference of two sums is a[i]. I mean that, say sums Sp and Sq end up at a[i-1] and difference of both is a[i]. Then Sp + a[i] equals Sq, giving Sq as a duplicate.
Say C[i] is count of the distinct sums in which end up at a[i].
So C[i] = C[i-1] + 1 - numbers of pairs of sums in which a[i-1] is involved whose difference is a[i].
But problem is to find the part of number of pairs in O(log n). Please give me some hint about this or if I am on wrong way and completely different approach is required problem point that out.
When S is not too large, we can count the distinct sums with one (fast) polynomial multiplication. When S is larger, N is hopefully small enough to use a quadratic algorithm.
Let x_1, x_2, ..., x_n be the array elements. Let y_0 = 0 and y_i = x_1 + x_2 + ... + x_i. Let P(z) = z^{y_0} + z^{y_1} + ... + z^{y_n}. Compute the product of polynomials P(z) * P(z^{-1}); the coefficient of z^k with k > 0 is nonzero if and only if k is a sub-array sum, so we just have to read off the number of nonzero coefficients of positive powers. The powers of z, moreover, range from -S to S, so the multiplication takes time on the order of S log S.
You can look at the sub-arrays as a kind of tree. In the sense that subarray [0,3] can be divided to [0,1] and [2,3].
So build up a tree, where nodes are defined by length of the subarray and it's staring offset in the original array, and whenever you compute a subarray, store the result in this tree.
When computing a sub-array, you can check this tree for existing pre-computed values.
Also, when dividing, parts of the array can be computed on different CPU cores, if that matters.
This solution assumes that you don't need all values at once, rather ad-hoc.
For the former, there could be some smarter solution.
Also, I assume that we're talking about counts of elements in 10000's and more. Otherwise, such work is a nice excercise but has not much of a practical value.
The sum-subset problem states:
Given a set of integers, is there a non-empty subset whose sum is zero?
This problem is NP-complete in general. I'm curious if the complexity of this slight variant is known:
Given a set of integers, is there a subset of size k whose sum is zero?
For example, if k = 1, you can do a binary search to find the answer in O(log n). If k = 2, then you can get it down to O(n log n) (e.g. see Find a pair of elements from an array whose sum equals a given number). If k = 3, then you can do O(n^2) (e.g. see Finding three elements in an array whose sum is closest to a given number).
Is there a known bound that can be placed on this problem as a function of k?
As motivation, I was thinking about this question How do you partition an array into 2 parts such that the two parts have equal average? and trying to determine if it is actually NP-complete. The answer lies in whether or not there is a formula as described above.
Barring a general solution, I'd be very interested in knowing an optimal bound for k=4.
For k=4, space complexity O(n), time complexity O(n2 * log(n))
Sort the array. Starting from 2 smallest and 2 largest elements, calculate all lesser sums of 2 elements (a[i] + a[j]) in the non-decreasing order and all greater sums of 2 elements (a[k] + a[l]) in the non-increasing order. Increase lesser sum if total sum is less than zero, decrease greater one if total sum is greater than zero, stop when total sum is zero (success) or a[i] + a[j] > a[k] + a[l] (failure).
The trick is to iterate through all the indexes i and j in such a way, that (a[i] + a[j]) will never decrease. And for k and l, (a[k] + a[l]) should never increase. A priority queue helps to do this:
Put key=(a[i] + a[j]), value=(i = 0, j = 1) to priority queue.
Pop (sum, i, j) from priority queue.
Use sum in the above algorithm.
Put (a[i+1] + a[j]), i+1, j and (a[i] + a[j+1]), i, j+1 to priority queue only if these elements were not already used. To keep track of used elements, maintain an array of maximal used 'j' for each 'i'. It is enough to use only values for 'j', that are greater, than 'i'.
Continue from step 2.
For k>4
If space complexity is limited to O(n), I cannot find anything better, than use brute force for k-4 values and the above algorithm for the remaining 4 values. Time complexity O(n(k-2) * log(n)).
For very large k integer linear programming may give some improvement.
Update
If n is very large (on the same order as maximum integer value), it is possible to implement O(1) priority queue, improving complexities to O(n2) and O(n(k-2)).
If n >= k * INT_MAX, different algorithm with O(n) space complexity is possible. Precalculate a bitset for all possible sums of k/2 values. And use it to check sums of other k/2 values. Time complexity is O(n(ceil(k/2))).
The problem of determining whether 0 in W + X + Y + Z = {w + x + y + z | w in W, x in X, y in Y, z in Z} is basically the same except for not having annoying degenerate cases (i.e., the problems are inter-reducible with minimal resources).
This problem (and thus the original for k = 4) has an O(n^2 log n)-time, O(n)-space algorithm. The O(n log n)-time algorithm for k = 2 (to determine whether 0 in A + B) accesses A in sorted order and B in reverse sorted order. Thus all we need is an O(n)-space iterator for A = W + X, which can be reused symmetrically for B = Y + Z. Let W = {w1, ..., wn} in sorted order. For all x in X, insert a key-value item (w1 + x, (1, x)) into a priority queue. Repeatedly remove the min element (wi + x, (i, x)) and insert (wi+1 + x, (i+1, x)).
Question that is very similar:
Is this variant of the subset sum problem easier to solve?
It's still NP-complete.
If it were not, the subset-sum would also be in P, as it could be represented as F(1) | F(2) | ... F(n) where F is your function. This would have O(O(F(1)) + O(F(2)) + O(F(n))) which would still be polynomial, which is incorrect as we know it's NP-complete.
Note that if you have certain bounds on the inputs you can achieve polynomial time.
Also note that the brute-force runtime can be calculated with binomial coefficients.
The solution for k=4 in O(n^2log(n))
Step 1: Calculate the pairwise sum and sort the list. There are n(n-1)/2 sums. So the complexity is O(n^2log(n)). Keep the identities of the individuals which make the sum.
Step 2: For each element in the above list search for the complement and make sure they don't share "the individuals). There are n^2 searches, each with complexity O(log(n))
EDIT: The space complexity of the original algorithm is O(n^2). The space complexity can be reduced to O(1) by simulating a virtual 2D matrix (O(n), if you consider space to store sorted version of the array).
First about 2D matrix: sort the numbers and create a matrix X using pairwise sums. Now the matrix is ins such a way that all the rows and columns are sorted. To search for a value in this matrix, search the numbers on the diagonal. If the number is in between X[i,i] and X[i+1,i+1], you can basically halve the search space by to matrices X[i:N, 0:i] and X[0:i, i:N]. The resulting search algorithm is O(log^2n) (I AM NOT VERY SURE. CAN SOMEBODY CHECK IT?).
Now, instead of using a real matrix, use a virtual matrix where X[i,j] are calculated as needed instead of pre-computing them.
Resulting time complexity: O( (nlogn)^2 ).
PS: In the following link, it says the complexity of 2D sorted matrix search is O(n) complexity. If that is true (i.e. O(log^2n) is incorrect), then the finally complexity is O(n^3).
To build on awesomo's answer... if we can assume that numbers are sorted, we can do better than O(n^k) for given k; simply take all O(n^(k-1)) subsets of size (k-1), then do a binary search in what remains for a number that, when added to the first (k-1), gives the target. This is O(n^(k-1) log n). This means the complexity is certainly less than that.
In fact, if we know that the complexity is O(n^2) for k=3, we can do even better for k > 3: choose all (k-3)-subsets, of which there are O(n^(k-3)), and then solve the problem in O(n^2) on the remaining elements. This is O(n^(k-1)) for k >= 3.
However, maybe you can do even better? I'll think about this one.
EDIT: I was initially going to add a lot proposing a different take on this problem, but I've decided to post an abridged version. I encourage other posters to see whether they believe this idea has any merit. The analysis is tough, but it might just be crazy enough to work.
We can use the fact that we have a fixed k, and that sums of odd and even numbers behave in certain ways, to define a recursive algorithm to solve this problem.
First, modify the problem so that you have both even and odd numbers in the list (this can be accomplished by dividing by two if all are even, or by subtracting 1 from numbers and k from the target sum if all are odd, and repeating as necessary).
Next, use the fact that even target sums can be reached only by using an even number of odd numbers, and odd target sums can be reached using only an odd number of odd numbers. Generate appropriate subsets of the odd numbers, and call the algorithm recursively using the even numbers, the sum minus the sum of the subset of odd numbers being examined, and k minus the size of the subset of odd numbers. When k = 1, do binary search. If ever k > n (not sure this can happen), return false.
If you have very few odd numbers, this could allow you to very quickly pick up terms that must be part of a winning subset, or discard ones that cannot. You can transform problems with lots of even numbers to equivalent problems with lots of odd numbers by using the subtraction trick. The worst case must therefore be when the numbers of even and odd numbers are very similar... and that's where I am right now. A uselessly loose upper bound on this is many orders of magnitudes worse than brute-force, but I feel like this is probably at least as good as brute-force. Thoughts are welcome!
EDIT2: An example of the above, for illustration.
{1, 2, 2, 6, 7, 7, 20}, k = 3, sum = 20.
Subset {}:
{2, 2, 6, 20}, k = 3, sum = 20
= {1, 1, 3, 10}, k = 3, sum = 10
Subset {}:
{10}, k = 3, sum = 10
Failure
Subset {1, 1}:
{10}, k = 1, sum = 8
Failure
Subset {1, 3}:
{10}, k = 1, sum = 6
Failure
Subset {1, 7}:
{2, 2, 6, 20}, k = 1, sum = 12
Failure
Subset {7, 7}:
{2, 2, 6, 20}, k = 1, sum = 6
Success
The time complexity is trivially O(n^k) (number of k-sized subsets from n elements).
Since k is a given constant, a (possibly quite high-order) polynomial upper bounds the complexity as a function of n.