I have an internal app (not a published one, only used within our Google Workspace domain) which is a command line tool to update the contents of some Google Sheets. It currently uses the https://www.googleapis.com/auth/drive scope and works fine.
I want to minimize the privileges of the authorization token that this app caches, and by reading the documentation it seems that I should be able to use the https://www.googleapis.com/auth/drive.readonly scope to find the file I want, and also https://www.googleapis.com/auth/drive.file to grant write access to only a specific file.
With the reduced scopes, I am not surprised to get an error like:
appNotAuthorizedToFile: The user has not granted the app 566375348811 write access to the file 1UsItGhBHwRaodHbv5g1LCrSESUZBkskDvKDkbGjREjI
The only relevant documentation talks about integrating apps with Google Drive and using the Drive Picker UI which I expect does this authorization behind the scenes. Since this is an internal command line tool, I really don't want to go that route.
Hence the question:
How do I open a file in a command line application using the https://www.googleapis.com/auth/drive.file scope?
I'm OK even if I need to set some magic metadata on the file to make it accessible.
Update
As I got a couple of responses saying that when using drive.file it is not possible to access files which are not created by the application, I am putting some supporting documentation here to show why I think it is possible:
The API-specific auth info is the first document on the Google Drive API page, and it specifically mentions:
So, when possible, use non-sensitive scopes as they narrow access to
specific functionality needed by an app. In most cases, providing
narrow access means using the
https://www.googleapis.com/auth/drive.file per-file access scope.
Further down the page it mentions:
This scope enables users to select the specific files from Google
Drive, and through the Google Picker, that they want to allow your app
to access.
I understand this to mean that it is possible to open files which were not created by the app, even when using drive.file.
My problem is that the document goes on to explain:
Many apps work with per-file access without any changes. If you are
currently using your own file picker, we recommend switching to the
Google Picker which fully supports the drive.file scope.
Well, since I am using a command line app, I cannot use the Google Picker, so I am asking how to implement my own. I do understand that the picker itself needs to have access to all the files (hence the need for a drive.readonly scope), but to actually be able to write the files, it needs the elevated permission of drive or the more restrictive per-file access of drive.file.
If I simulate an authorization request for drive.file I get a prompt which explains that authorizing the request will grant my app to:
See, edit, create, and delete only the specific Google Drive files you use with this app ℹ️
Clicking on the information icon I get a more verbose explanation which reads like it support opening any file I authorize:
This app wants permission to create new files or change existing files
that you open with this app. Once authorized, the app can:
See these files
Upload and download these files
Delete these files
See the names and emails of people you share these files with
Share and stop sharing these files with others
Organize these files
There may be private information in your Google Drive, like financial
records, medical reports, photos or tax info.
There are also other examples of applications like ZIP Extractor or diagrams.net or Photo Editor which use the drive.file scope (based on the authorization prompt), and which I can use to open and edit files that were not created by them.
I am posting this as an answer, to demonstrate an ugly "workaround" for the issue.
TL;DR: Use a web based frontend to authorize access to files. Once the app is authorized, the command line app inherits the permissions.
More step by step instructions, assuming we already have a working command line project:
Go to https://myaccount.google.com/permissions and revoke all access I have granted to my app.
Follow the instructions at the Drive Picker API to update my current GCP project.
Create an API key. OK to be unrestricted, but I restricted it to https://localhost:9843
Create a new OAuth 2.0 client ID of a "Web application" type (my current one is "Desktop" type and that would not work). Authorize https://localhost:9843 as a JavaScript origin.
Copy the helloworld.html example at the bottom of the Drive Picker API guide which is also on GitHub with the following modifications:
Set developerKey to the API key created above
Set clientId to the new OAuth 2.0 client ID created abovce
Set appId to the numeric project ID of my GCP project
Add 'include_granted_scopes': true to the call to window.gapi.auth.authorize
Update createPicker to make it easier to find the files I want. E.g., set the mime type filter to application/vnd.google-apps.spreadsheet.
Host the example in a browser with ruby -rwebrick/https -e 'WEBrick::HTTPServer.new(:Port => 9843, :DocumentRoot => ".", :SSLEnable => true, :SSLCertName => "CN=localhost", :SSLCertComment => "Autogenerated" ).start'
Now, if my command line app fails to edit a file, I can use https://localhost:9843/helloworld.html to grant access to the file, and my command line app can then edit that file.
If you check the docs for the scope you will find it says.
https://www.googleapis.com/auth/drive.file View and manage Google Drive files and folders that you have opened or created with this app
This gives your app access to files that the app itself created or has previously opened.
You should also know that there is no way to limit authorization to a single file. Authorization is all or not thing.
How do I open a file in a command line application using the https://www.googleapis.com/auth/drive.file scope?
You make sure that the file was created by the app itself. using files.create. If the file was created by any other app the you cant access it using the drive.file scope
There is one note though if you have https://www.googleapis.com/auth/drive.read-only scope and you open that file to read it. the line where it says opened or created with this app implies to me that once you have opended it for read in this app that you would then be able to use it with https://www.googleapis.com/auth/drive.file but its not something I have tried.
Another thing is im not sure what you mean by open the google drive api is a file storage api its not going to let you see the contents of the file your going to have to download it and open it locally. Have you considered going though the Google sheets api if you want to read and write to it programmatically?
This is primarily a strategic question.
I have been using Laravel as of late to build some apps and have an multi-user platform/domain based.
In other words I want to create a web app (and ultimately a mobile app) that I can deploy as a new site/app for a new user who signs up.
So, for instance I have built a site all about Chihuahua's with features for dogs.
But I want to reproduce said site/app for a new user who will use the app to run a site about Dobermans. Unique domain and everything, so I am thinking it would be a whole new install rather than sub-pages of the original app.
Does Laravel allow you to somehow create an app the way you want it and then deploy it out? And then if you updated the base app you could re-deploy it similar to how wordpress works.
Bare bones laravel does not support multi domain and hosting. But it is possible to get some sort of api for a hosting service and domain service and have them deploy their "dog" site like that.
Does anyone has any experience in next task:
I have ready project with some functionallity (some CRUD and payment functions)
I need to make something like demo mode. Where user can create records and make payments (always successfull, without taking charge), but it should not be recorded to database.
All entered data should be available only for this user and be live only fo
My question is how to make it without making copy of the controllers for fake actions?
I have try to look in to database driver that works with session as storage but have not found anything about it.
I am creating an app which saves same files on dropBox, in the app folder. all the saved files uploaded by all app users should then be displayed in a table view. the result which I got is that only the user's files are shown, but I would like the data do be synchronized among all app users. I posted a question of this kind on dropbox developer forum and this was the answer:
"The Dropbox API is built to sync files within each specific authorized account, not between all authorized accounts.
If you do need to copy files between accounts, check out the new /copy_ref call:
https://www.dropbox.com/developers/reference/api#copy_ref"
...
"This really depends on the structure/use of your app. If it's just an iOS app, with no server side component, you'll need to build some way for users to send the copy references to each other."
I so tried to understand what the copy ref was, but It isn't very clear. do they mean that I need to build a server like mySql to do this, or can I integrate the ability to share all the data in the app itself??
I have a WP7 App in the MarketPlace and I want to rename this app as its existing name clashes with an existing website. If I publish the App with the new name to the marketplace will the existing settings a files in Isolated Storage continue to work with the new app with the different name? I want to make sure that existing users wont loose any data if I change the apps name.
It looks to me like you're out of luck. Resubmitting you application with a new name will be a new application (AFAICT there is not a clear way around that), so it won't have access to the isolated storage for a different application.
Maybe you can consider submitting an upgrade to the existing application that will transfer the data somewhere (post to a web service or some such), in conjunction with your new application that can retrieve that information on a one-time basis.
Best luck!
You can change the name displayed on the phone. However, re-naming the "title" on the marketplace is a no-go.
It's been somewhat possible in the past, but with the new AppHub it's most definitively not possible anymore.