2023-01-10 01:10:24,612 ERROR o.a.j.v.b.BackendListener: StandardJMeterEngine#27a0a5a2-Backend Listener Exception initialising: io.github.adrianmo.jmeter.backendlistener.azure.AzureBackendClient
java.lang.ClassNotFoundException: io.github.adrianmo.jmeter.backendlistener.azure.AzureBackendClient
Add the next lines to your pom.xml file in order to include the plugin into JMeter Classpath:
<configuration>
<jmeterExtensions>
<artifact>io.github.adrianmo:jmeter.backendlistener.azure:0.2.8</artifact>
</jmeterExtensions>
</configuration>
Full pom.xml just in case
<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>org.example</groupId>
<artifactId>jmeter-maven</artifactId>
<version>1.0-SNAPSHOT</version>
<properties>
<maven.compiler.source>11</maven.compiler.source>
<maven.compiler.target>11</maven.compiler.target>
<project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
</properties>
<build>
<plugins>
<plugin>
<groupId>com.lazerycode.jmeter</groupId>
<artifactId>jmeter-maven-plugin</artifactId>
<version>3.7.0</version>
<executions>
<!-- Generate JMeter configuration -->
<execution>
<id>configuration</id>
<goals>
<goal>configure</goal>
</goals>
</execution>
<!-- Run JMeter tests -->
<execution>
<id>jmeter-tests</id>
<goals>
<goal>jmeter</goal>
</goals>
</execution>
<!-- Fail build on errors in test -->
<execution>
<id>jmeter-check-results</id>
<goals>
<goal>results</goal>
</goals>
</execution>
</executions>
<configuration>
<jmeterExtensions>
<artifact>io.github.adrianmo:jmeter.backendlistener.azure:0.2.8</artifact>
</jmeterExtensions>
</configuration>
</plugin>
</plugins>
</build>
</project>
More information:
Adding Excluding libraries to from the classpath
How to Use the JMeter Maven Plugin
Related
I cannot get maven checkstyle to run on build or verify, despite copy & pasting the code directly from the checkstyle website.
I can see checkstyle working fine and finding problems when running mvn checkstyle:check, but not on any phase like clean compile verify. These phases just compile fine and find no problems, completely ignoring checkstyle. I set up a minimal example here. The pom.xml is as follows:
<project xmlns="http://maven.apache.org/POM/4.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 https://maven.apache.org/xsd/maven-4.0.0.xsd">
<groupId>checkstyle-test</groupId>
<properties>
<project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
<java.version>15</java.version>
<maven.compiler.source>15</maven.compiler.source>
<maven.compiler.target>15</maven.compiler.target>
</properties>
<modelVersion>4.0.0</modelVersion>
<artifactId>core</artifactId>
<version>0.0.2</version>
<packaging>jar</packaging>
<build>
<pluginManagement>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-checkstyle-plugin</artifactId>
<version>3.1.2</version>
<configuration>
<encoding>UTF-8</encoding>
<consoleOutput>true</consoleOutput>
<failsOnError>true</failsOnError>
<failOnViolation>true</failOnViolation>
<linkXRef>false</linkXRef>
</configuration>
<executions>
<execution>
<id>validate</id>
<phase>validate</phase>
<goals>
<goal>check</goal>
</goals>
</execution>
</executions>
</plugin>
</plugins>
</pluginManagement>
</build>
</project>
You need to bind Checkstyle execution to the verify phase, like this:
...
<execution>
<id>checkstyle-check</id>
<phase>verify</phase>
<configuration>
<sourceDirectories>${project.build.sourceDirectory}</sourceDirectories>
<configLocation>config/checkstyle_checks.xml</configLocation>
<encoding>UTF-8</encoding>
</configuration>
<goals>
<goal>check</goal>
</goals>
</execution>
...
This snippet is taken from one of my projects, you can view the entire pom.xml here.
Figured it out: I had the block in <pluginManagement>. Moving it out of there it instantly worked. I wished, maven would have more complete example on their website.
I'm able to generate HTML reports when I use 2.8.0 version of jmeter-maven-plugin. I clearly see one folder target\jmeter\reports. However, when I use 3.1.1 (latest) version, I don't see this folder at all.
Please let me know if there is any way to generate HTML reports with the latest version.
Below is my sample of my pom.xml:
<plugins>
<plugin>
<groupId>com.lazerycode.jmeter</groupId>
<artifactId>jmeter-maven-plugin</artifactId>
<version>2.8.0</version>
<executions>
<!-- Run JMeter tests -->
<execution>
<id>jmeter-tests</id>
<goals>
<goal>jmeter</goal>
</goals>
</execution>
<execution>
<id>configuration</id>
<goals>
<goal>configure</goal>
</goals>
</execution>
<!-- Fail build on errors in test -->
<execution>
<id>jmeter-check-results</id>
<goals>
<goal>results</goal>
</goals>
<configuration>
<generateReports>true</generateReports>
</configuration>
</execution>
</executions>
</plugin>
</plugins>
</build> ```
This configuration block:
<configuration>
<generateReports>true</generateReports>
</configuration>
must be outside of the <execution> block
Full pom.xml just in case:
<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>org.example</groupId>
<artifactId>jmeter</artifactId>
<version>1.0-SNAPSHOT</version>
<build>
<plugins>
<plugin>
<groupId>com.lazerycode.jmeter</groupId>
<artifactId>jmeter-maven-plugin</artifactId>
<version>3.1.1</version>
<executions>
<!-- Generate JMeter configuration -->
<execution>
<id>configuration</id>
<goals>
<goal>configure</goal>
</goals>
</execution>
<!-- Run JMeter tests -->
<execution>
<id>jmeter-tests</id>
<goals>
<goal>jmeter</goal>
</goals>
</execution>
<!-- Fail build on errors in test -->
<execution>
<id>jmeter-check-results</id>
<goals>
<goal>results</goal>
</goals>
</execution>
</executions>
<configuration>
<generateReports>true</generateReports>
</configuration>
</plugin>
</plugins>
</build>
</project>
More information:
JMeter Maven Plugin - Generating Reports
How to Use the JMeter Maven Plugin
I want mvn clean verify to run following command for me
jmeter -n -t <file.jmx> -l <reports.csv> -e -o /htmlReports
I checked below similar question How to create HTML reports using Jmeter Maven Plugin 2.1.0. but it didn't work for me.
I want all data to be inside target folder, plus .jtl so that at next run all previous gets cleaned up.
pom.xml
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>com.demo.performancetesting</groupId>
<artifactId>Demo-performance-testing</artifactId>
<version>0.0.1-SNAPSHOT</version>
<dependencies>
<dependency>
<groupId>junit</groupId>
<artifactId>junit</artifactId>
<version>3.8.1</version>
<scope>test</scope>
</dependency>
</dependencies>
<build>
<plugins>
<plugin>
<groupId>com.lazerycode.jmeter</groupId>
<artifactId>jmeter-maven-plugin</artifactId>
<version>2.8.0</version>
<configuration>
<generateReports>true</generateReports>
</configuration>
<executions>
<execution>
<id>jmeter-tests</id>
<goals>
<goal>jmeter</goal>
</goals>
</execution>
</executions>
</plugin>
<plugin>
<groupId>de.codecentric</groupId>
<artifactId>jmeter-graph-maven-plugin</artifactId>
<version>0.1.0</version>
<configuration>
<inputFile>${project.build.directory}/jmeter/results/*.jtl</inputFile>
<graphs>
<graph>
<pluginType>ResponseTimesOverTime</pluginType>
<width>800</width>
<height>600</height>
<outputFile>${project.build.directory}/jmeter/results/BlazeDemoRequest.png</outputFile>
</graph>
</graphs>
</configuration>
</plugin>
</plugins>
</build>
</project>
You can do this using Maven Exec plugin, the relevant configuration would be
<configuration>
<basedir>/path/to/bin/folder/of/your/jmeter/installation</basedir>
<executable>jmeter</executable>
<commandlineArgs>-n -t -f file.jmx -l ${basedir}/target/reports.csv -e -o ${basedir}/target/htmlReports</commandlineArgs>
</configuration>
Just in case something "will not work" again here is full pom.xml file
<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>com.example</groupId>
<artifactId>jmeter</artifactId>
<version>1.0-SNAPSHOT</version>
<build>
<plugins>
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>exec-maven-plugin</artifactId>
<version>1.6.0</version>
<executions>
<execution>
<phase>integration-test</phase>
<goals>
<goal>exec</goal>
</goals>
<configuration>
<basedir>/path/to/bin/folder/of/your/jmeter/installation</basedir>
<executable>jmeter</executable>
<commandlineArgs>-n -t -f file.jmx -l ${basedir}/target/reports.csv -e -o
${basedir}/target/htmlReports
</commandlineArgs>
</configuration>
</execution>
</executions>
</plugin>
</plugins>
</build>
</project>
Don't forget to change /path/to/bin/folder/of/your/jmeter/installation to real path to your JMeter otherwise it "will not work".
Report generation via JMeter Maven Plugin should also work fine, if you experience any issues please show your pom.xml file and maven command output.
Example configuration you can use for reference:
<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>com.example</groupId>
<artifactId>jmeter</artifactId>
<version>1.0-SNAPSHOT</version>
<build>
<plugins>
<plugin>
<groupId>com.lazerycode.jmeter</groupId>
<artifactId>jmeter-maven-plugin</artifactId>
<version>2.8.0</version>
<executions>
<!-- Run JMeter tests -->
<execution>
<id>jmeter-tests</id>
<goals>
<goal>jmeter</goal>
</goals>
<configuration>
<generateReports>true</generateReports>
</configuration>
</execution>
</executions>
</plugin>
</plugins>
</build>
</project>
N.B.
you will need to copy your file.jmx script into src/test/jmeter folder, otherwise it "will not work"
if your test is using any JMeter Plugins - it "will not work" without defining them as dependencies
if your test uses external data files - it "will not work" unless you copy them to src/test/jmeter folder
More information: Five Ways To Launch a JMeter Test without Using the JMeter GUI
Report generation with JMeter Maven Plugin works for your requirement, you don't need any additional plugin.
Example:
<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>com.demo.performancetesting</groupId>
<artifactId>Demo-performance-testing</artifactId>
<version>1.0-SNAPSHOT</version>
<build>
<plugins>
<plugin>
<groupId>com.lazerycode.jmeter</groupId>
<artifactId>jmeter-maven-plugin</artifactId>
<version>2.8.0</version>
<executions>
<!-- Run JMeter tests -->
<execution>
<id>jmeter-tests</id>
<goals>
<goal>jmeter</goal>
</goals>
</execution>
</executions>
</plugin>
</plugins>
</build>
</project>
Requirements:
copy your jmx file into src/test/jmeter folder
if you use 3rd party plugins like JMeter Plugins, ensure you follow this documentation
if you use CSV data files - copy them to src/test/jmeter folder
Step 1 - Create test plan and save JMX script
Step 2 - Executing JMeter tests
<plugin>
<groupId>com.lazerycode.jmeter</groupId>
<artifactId>jmeter-maven-plugin</artifactId>
<version>1.8.1</version>
<executions>
<execution>
<id>jmeter-tests</id>
<phase>verify</phase>
<goals>
<goal>jmeter</goal>
</goals>
</execution>
</executions>
<configuration>
<ignoreResultFailures>true</ignoreResultFailures>
<testResultsTimestamp>false</testResultsTimestamp>
</configuration>
</plugin>
Step 3 - Save test result into csv/xls file
Step 4 - The following plugin is used to transform the result
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>xml-maven-plugin</artifactId>
<version>1.0</version>
<executions>
<execution>
<phase>verify</phase>
<goals>
<goal>transform</goal>
</goals>
</execution>
</executions>
<configuration>
<transformationSets>
<transformationSet>
<dir>${project.build.directory}/jmeter/results</dir>
<stylesheet>${project.basedir}/src/main/jmeter-results-report_21.xsl</stylesheet>
<outputDir>${project.build.directory}/jmeter/results</outputDir>
<fileMappers>
<fileMapper implementation="org.codehaus.plexus.components.io.filemappers.RegExpFileMapper">
<pattern>(.*?)\s(.*?)</pattern>
<replacement>$1$2</replacement>
<replaceAll>true</replaceAll>
</fileMapper>
<fileMapper implementation="org.codehaus.plexus.components.io.filemappers.FileExtensionMapper">
<targetExtension>.html</targetExtension>
</fileMapper>
</fileMappers>
</transformationSet>
</transformationSets>
</configuration>
</plugin>
I am trying to run a jmeter script using 'mvn verify' and getting below error. I am new to Jmeter and tried out solutions from previous post but in vain. How to resolve this?
[INFO] Error in NonGUIDriver java.lang.IllegalArgumentException: Problem loading XML <>, missing class com.thoughtworks.xstream.converters.ConversionException:
<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>dap-Jmeter</groupId>
<artifactId>Jmeter</artifactId>
<version>1</version>
<packaging>jar</packaging>
<name>jmeter-maven</name>
<url>http://maven.apache.org</url>
<properties>
<project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
<start-class>1.App</start-class>
<java.version>1.8</java.version>
<msgpack.version>0.7.0-p3</msgpack.version>
<lombok.version>1.14.8</lombok.version>
<rest.assured.version>2.3.3</rest.assured.version>
</properties>
<dependencies>
<dependency>
<groupId>kg.apc</groupId>
<artifactId>jmeter-plugins-standard</artifactId>
<version>1.4.0</version>
</dependency>
<dependency>
<groupId>kg.apc</groupId>
<artifactId>jmeter-plugins-extras-libs</artifactId>
<version>1.3.1</version>
</dependency>
</dependencies>
<build>
<plugins>
<plugin>
<groupId>com.lazerycode.jmeter</groupId>
<artifactId>jmeter-maven-plugin</artifactId>
<version>2.7.0</version>
<executions>
<!-- Run JMeter tests -->
<execution>
<id>jmeter-tests</id>
<goals>
<goal>jmeter</goal>
</goals>
</execution>
<!-- Fail build on errors in test -->
</executions>
<configuration>
<jmeterExtensions>
<artifact>kg.apc:jmeter-plugins:pom:1.3.1</artifact>
</jmeterExtensions>
</configuration>
</plugin>
</plugins>
</build>
</project>
Check target/jmeter/logs folder, it should have full log file for your test(s), my expectation is that your test relies on a plugin or a third-party .jar file which is missing in the JMeter Classpath, if you need all this stuff like RestAssured and Lombok in your test you need to add them a little bit differently to wit
<configuration>
<testPlanLibraries>
<artifact>org.msgpack:msgpack-core:0.7.0-p3</artifact>
<articact>org.projectlombok:lombok:1.14.8</articact>
<artifact>com.jayway.restassured:rest-assured:2.3.3</artifact>
</testPlanLibraries>
<jmeterExtensions>
<artifact>kg.apc:jmeter-plugins:pom:1.3.1</artifact>
<articact>kg.apc:jmeter-plugins-standard:1.4.0</articact>
</jmeterExtensions>
<downloadExtensionDependencies>false</downloadExtensionDependencies>
</configuration>
Full pom.xml just in case:
<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>com.example</groupId>
<artifactId>com.example.jmeter</artifactId>
<version>1.0-SNAPSHOT</version>
<build>
<plugins>
<plugin>
<groupId>com.lazerycode.jmeter</groupId>
<artifactId>jmeter-maven-plugin</artifactId>
<version>2.7.0</version>
<executions>
<!-- Run JMeter tests -->
<execution>
<id>jmeter-tests</id>
<goals>
<goal>jmeter</goal>
</goals>
</execution>
<!-- Fail build on errors in test -->
<execution>
<id>jmeter-check-results</id>
<goals>
<goal>results</goal>
</goals>
</execution>
</executions>
<configuration>
<testPlanLibraries>
<artifact>org.msgpack:msgpack-core:0.7.0-p3</artifact>
<articact>org.projectlombok:lombok:1.14.8</articact>
<artifact>com.jayway.restassured:rest-assured:2.3.3</artifact>
</testPlanLibraries>
<jmeterExtensions>
<artifact>kg.apc:jmeter-plugins:pom:1.3.1</artifact>
<articact>kg.apc:jmeter-plugins-standard:1.4.0</articact>
</jmeterExtensions>
<downloadExtensionDependencies>false</downloadExtensionDependencies>
</configuration>
</plugin>
</plugins>
</build>
</project>
References:
Adding jar's to the /lib directory
Adding jar's to the /lib/ext directory
JMeter Maven Plugin Wiki
Five Ways To Launch a JMeter Test without Using the JMeter GUI
The below POM solved the issue.
<dependencies>
<dependency>
<groupId>kg.apc</groupId>
<artifactId>jmeter-plugins-extras-libs</artifactId>
<version>1.3.1</version>
</dependency>
</dependencies>
<build>
<plugins>
<plugin>
<groupId>com.lazerycode.jmeter</groupId>
<artifactId>jmeter-maven-plugin</artifactId>
<version>2.7.0</version>
<executions>
<execution>
<id>jmeter-tests</id>
<goals>
<goal>jmeter</goal>
</goals>
</execution>
</executions>
<configuration>
<jmeterExtensions>
<artifact>kg.apc:jmeter-plugins-casutg:2.4</artifact>
<artifactId>kg.apc:jmeter-plugins-extras-libs:1.3.1</artifactId>
</jmeterExtensions>
<!-- The plugin uses some broken dependencies
An alternative is to set this to true and use excludedArtifacts, see below
-->
<downloadExtensionDependencies>false</downloadExtensionDependencies>
</configuration>
</plugin>
</plugins>
</build>
I am trying to generate jmeter dashboard report from maven. But for generating jmeter dashboard report, we have to fire a command,
jmeter -g /path/to/jtl/file -o /where/you/want/to/store/dashboard
But with maven can we do that? what i want is to remove all manual process of copying csv file and run command on local copy of jmeter.
You can do it via extra Exec Maven Plugin task as follows:
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>exec-maven-plugin</artifactId>
<version>1.5.0</version>
<executions>
<execution>
<id>generate-report-dashboard</id>
<phase>verify</phase>
<goals>
<goal>exec</goal>
</goals>
<configuration>
<executable>java</executable>
<arguments>
<argument>-classpath</argument>
<argument>/path/to/ApacheJMeter.jar</argument>
<argument>org.apache.jmeter.NewDriver</argument>
<argument>-g</argument>
<argument>/path/to/results.jtl</argument>
<argument>-o</argument>
<argument>/path/to/report/folder<argument>
</arguments>
</configuration>
</execution>
</executions>
</plugin>
See Five Ways To Launch a JMeter Test without Using the JMeter GUI article for more information on different ways of kicking off a JMeter test without using GUI
Using last version of jmeter-maven-plugin it will be generated by default configuration.
Sample pom.xml that uses JMeter 3.3:
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>com.foo</groupId>
<artifactId>test</artifactId>
<packaging>jar</packaging>
<version>1.0-SNAPSHOT</version>
<name>training-project</name>
<url>http://maven.apache.org</url>
<dependencies>
</dependencies>
<properties>
<project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
</properties>
<build>
<plugins>
<plugin>
<groupId>com.lazerycode.jmeter</groupId>
<artifactId>jmeter-maven-plugin</artifactId>
<version>2.6.0</version>
<executions>
<execution>
<id>jmeter-tests</id>
<goals>
<goal>jmeter</goal>
</goals>
</execution>
<execution>
<id>jmeter-tests2</id>
<goals>
<goal>results</goal>
</goals>
</execution>
</executions>
<configuration>
<generateReports>true</generateReports>
</configuration>
</plugin>
</plugins>
</build>
</project>