im have problem with install winapi lua.
OS : Win 8.1,
Lua version: 5.1.5,
Luarocks latest.
Command line:
C:\Users\user\Desktop\luarocks-3.9.2-windows-32>luarocks install winapi
Warning: Lua 5.4 interpreter not found at C:\Users\Didn't understanded word\Desktop\luarocks-3.
9.2-windows-32
Modules may not install with the correct configurations. You may want to configu
re the path prefix to your build of Lua 5.4 using
luarocks config --local lua_dir <your-lua-prefix>
Installing https://luarocks.org/winapi-1.4.2-1.src.rock
Error: Could not fetch rock file: Failed creating temporary directory luarocks-r
ock-winapi-1.4.2-1: Failed setting permission exec for all
C:\Users\user\Desktop\luarocks-3.9.2-windows-32>
Im tried to install without luarocks winapi, but I has got C files and other didn't understanded files.
Related
I've recently replaced Win10 by Linux Debian 11.2 on my PC (hence I'm a newbee in Linux). Now, not all programs are available as deb-Files.
I tried to compile source code - here a synthesizer ams-2.2.0 - from a tar.gz files (after unzipping into a separate folder) with steps (as written in the INSTALL.TXT to this source, and obviously usual)
./configure
make
make install
I get a bunch of error messages for missing files, when running ./congigure most resolved by installation of missing packages, but at last it fails with error message:
checking for QTCore Qt5Gui Qt5Widgets >= 5.0... no
configure: error: cannot find Qt5 library >= 5.0
(hope to get all written correctly, because I can't copy from the terminal ... Ctrl-Shift-C doesn't seem to work)
I checked the installation in synaptics and found that Qt-Version is 5.12. So what's wrong here?
I'm afraid to have this error message everytime I try to compile different source codes.
You need to install libqtcore and libqtwidgets with development headers, they are in qtbase5-dev package.
sudo apt install build-essential qtbase5-dev qtchooser
I'm on Linux CentOS. I have a custom install location for R (which I think was built as a shared library). I'm trying to install rpy2 using the command
pip install --install-option="--prefix=/home/user/python_packages" --global-option=build_ext --global-option="-I/home/user/Software/R/R-3.2.3/include" .
but I get the error
/usr/bin/ld: cannot find -lr_utils
I also get the message
R was not built as a library
which I don't understand as I did provide the enable-R-shlib option when building it.
I'm working on a project which was written in Python 2, and I'm upgrading it to Python 3. So far, I've just been finding minor syntax errors which are easily fixable. What I've done is created a new project in Python 3, ensured that it worked, and copies chunks of code from the old project into the new one.
Right now, I'm having trouble with pysvn. Initially, I was getting this error:
ImportError: No module named 'pysvn'
At this point, I tried using pip install pysvn, which didn't work. I got the following:
pip install pysvn
Collecting pysvn
Could not find a version that satisfies the requirement pysvn (from versions:)
No matching distribution found for pysvn
So then after a bit of research, I went to the pysvn download site and tried:
>pip install --index-url http://pysvn.tigris.org/project_downloads.html pysvn, which gave me this error:
Collecting pysvn
The repository located at pysvn.tigris.org is not a trusted or secure host and is being ignored. If this repository is available via HTTPS it is recommended to use HTTPS instead, otherwise you may silence this warning and allow it anyways with '--trusted-host pysvn.tigris.org'.
and also the same error as when I tried >pip install pysvn.
My next step was to manually download the .exe file for the version I needed, and I was able to successfully install pysvn. I have checked the site-packages directory, and pysvn is indeed there, but pip still can't tell me anything about it:
>pip show pysvn
>
When I do this for another installed module, selenium for example, I get the following:
pip show selenium
Metadata-Version: 1.1
Name: selenium
Version: 2.49.2
Summary: Python bindings for Selenium
Home-page: https://github.com/SeleniumHQ/selenium/
Author: UNKNOWN
Author-email: UNKNOWN
License: UNKNOWN
Location: ...\lib\site-packages
Requires:
I was able to verify that the installation of pysvn was successful because my project now runs instead of giving me that ImportError.
So why can pip not give me information for another module in the same directory that was successfully installed?
As it turns out, because I didn't use pip install for pysvn, pip didn't know that pysvn existed. Because it wasn't available from PyPI (the Python Package Index), there was no way that pip could see it (because that's where pip goes first to find packages that it's attempting to install).
From the pip user guide:
pip supports installing from PyPI, version control, local projects, and directly from distribution files.
Since I had eventually downloaded pysvn from its own download site (which was not any of the above 4 options) and ran the .exe manually, pip simply doesn't know about it even though it's in the same directory as other packages installed by pip.
I suppose I could've also retrieved the distribution files and used pip with those, but my workaround did the trick.
My way on linux:
Get sources from here
tar -zxf pysvn-1.9.10.tar.gz
apt-get install subversion libsvn1 libsvn-dev make g++
cd pysvn-1.9.10/Source
python setup.py configure --pycxx-dir=/pysvn-1.9.10/Import/pycxx-7.1.3/
make
Here i've got errors below:
Compile: /pysvn-1.9.10/Import/pycxx-7.1.3/Src/cxxsupport.cxx into cxxsupport.o
/pysvn-1.9.10/Import/pycxx-7.1.3/Src/cxxsupport.cxx:42:10: fatal error: Src/Python3/cxxsupport.cxx: No such file or directory
#include "Src/Python3/cxxsupport.cxx"
Compile: /pysvn-1.9.10/Import/pycxx-7.1.3/Src/cxxextensions.c into cxxextensions.o
/pysvn-1.9.10/Import/pycxx-7.1.3/Src/cxxextensions.c:42:10: fatal error: Src/Python3/cxxextensions.c: No such file or directory
#include "Src/Python3/cxxextensions.c"
It is needed to edit that files:
vi /pysvn-1.9.10/Import/pycxx-7.1.3/Src/cxxsupport.cxx
change #include "Src/Python3/cxxsupport.cxx" to
#include "Python3/cxxsupport.cxx"
and same on second file. Than make again:
make clean && make
...
Compile: /code/pysvn-1.9.10/Import/pycxx-7.1.3/Src/cxxextensions.c into cxxextensions.o
Compile: /code/pysvn-1.9.10/Import/pycxx-7.1.3/Src/IndirectPythonInterface.cxx into IndirectPythonInterface.o
Compile: /code/pysvn-1.9.10/Import/pycxx-7.1.3/Src/cxx_exceptions.cxx into cxx_exceptions.o
Link pysvn/_pysvn_3_7.so
Then just copy it to the site-packages (change to yours directory):
mkdir /usr/local/lib/python3.7/site-packages/pysvn
cp /code/pysvn-1.9.10/Sources/pysvn/__init__.py /usr/local/lib/python3.7/site-packages/
cp /code/pysvn-1.9.10/Sources/pysvn/_pysvn*.so /usr/local/lib/python3.7/site-packages/
I am attempting to install M2Crypto on a Windows XP platform. I have Python, easy_install and SWIG installed, but when I attempt to easy_install M2Crypto I get the following:
SWIG\_m2crypto.i(31) : Error: Unable to find 'openssl\opensslv.h'
SWIG\_m2crypto.i(45) : Error: Unable to find 'openssl\safestack.h'
SWIG\_evp.i(12) : Error: Unable to find 'openssl\opensslconf.h'
SWIG\_ec.i(7) : Error: Unable to find 'openssl\opensslconf.h'
error: Setup script exited with error: command 'swig.exe' failed with exit status 1
I have read elsewhere that people have suggested easy_install openssl-devel, but that simply tells me that there are no packages found with that name. Is the name perhaps case-sensitive (I've tried various permutations without success), or does that advice not apply to Windows?
I'm not looking for alternatives to M2Crypto. I am picking up some existing code that uses it, so I need to get my development environment to be able to run what's already written.
As jay stated in his answer you should try to build it from source. And I tried. The setup.py does not recognize the --openssl option. Looking at the output from the default setup.py I realized that the search location was c:\pkg and not c:\pkg\openssl.
The solution:
Download and install OpenSSL from Win32 OpenSSL
Copy the lib and include folders to c:\pkg
Check that swig.exe is available in your path
Run easy_install M2Crypto
Worked for me like a charm.
Had a similar problem. After downloading the source package of M2Crypto and reading the INSTALL file I found the following:
Differences when installing on Windows
--------------------------------------
Before building from source, you need to install OpenSSL's include files,
import libraries and DLLs. By default setup.py assumes that OpenSSL include
files are in ``c:\pkg\openssl\include``, and the import libraries
in ``c:\pkg\openssl\lib``. As with other platforms, you can specify a different
OpenSSL location with --openssl option to build_ext command.
I am trying to compile a Rust program on Windows, but I get this error message:
Compiling openssl-sys v0.6.4
failed to run custom build command for `openssl-sys v0.6.4`
[...]
failed to execute command: The system couldn't find the specified file. (os error 2)
Is `gcc` not installed? (see https://github.com/alexcrichton/gcc-rs#windows-notes for help)
--- stderr
thread '<main>' panicked at 'explicit panic', C:\Users\User\.cargo\registry\src\github.com-0a35038f75765ae4\gcc-0.3.12\src\lib.rs:510
Cargo compiled every other package without problem, but it can't compile the openssl package.
I searched for help with this specific error and found a github issue for hyperium. The first answer references the openssl building guide for Windows.
I don't understand exactly how I have to build openssl in Windows. I installed MinGW and added the bin path to the global PATH variable, so gcc is reachable, but this did not solve the error.
I use Rust 1.2 and Cargo 0.4.0. My project is an example for a Telegram API wrapper.
1) Download ssl
Installs Win32 OpenSSL v1.0.2d
Install it here: C:\OpenSSL-Win32，C:\OpenSSL-Win32\include,C:\OpenSSL-Win32\lib
2) Install MinGW,and add system env path ,,C:\MinGW\bin,important,MinGW's installed path contain char 'MinGW '
3) cmd run env OPENSSLLIBDIR=C:/OpenSSL-Win32/lib OPENSSLINCLUDEDIR=C:/OpenSSL-Win32/include cargo build