I am running Docker 20.10.22 on Windows 10 Pro 64-bit.
In my Docker Desktop settings, I have using WSL 2 disabled:
I have Hyper-V enabled:
I have Docker Desktop in Windows containers mode instead of Linux containers mode.
Despite this, when I try to run this Windows Docker container, I this error message:
>docker run --rm -it mcr.microsoft.com/windows:ltsc2019
docker: Error response from daemon: open \\.\pipe\docker_engine_windows: The system cannot find the file specified.
See 'docker run --help'.
Do I need to change any Docker or Windows settings in order to be able to successfully run the Windows container?
The issue was that both "Containers" and "Hyper-V" need to be enabled.
To fix this, I ran
Enable-WindowsOptionalFeature -Online -FeatureName containers -All
in an Administrator PowerShell and then restarted my Windows computer. (Note that I already had Hyper-V enabled.) After Docker Desktop finished starting, running
docker run --rm -it mcr.microsoft.com/windows:ltsc2019
successfully pulled and ran the image.
I have installed Docker in my windows 10 machine.
When i open power-shell and check docker version it shows below
PS C:\Users\XXXXX> docker --version
Docker version 19.03.4, build 9013bf5
But when i ran Docker images or docker run it did not worked
PS C:\Users\XXXXX> docker images
error during connect: Get http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.40/images/json: open
//./pipe/docker_engine: The system cannot find the file specified. In the
default daemon configuration on Windows, the docker client must be run elevated to connect. This
error may also indicate that the docker daemon is not running.
For Docker run
PS C:\Users\XXXX> docker run hello-world
docker : C:\Program Files\Docker\Docker\Resources\bin\docker.exe: error during connect: Post
http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.40/containers/create: open //./pipe/docker_engine: The
system cannot find
the file specified. In the default daemon configuration on Windows, the docker client must be run
elevated to connect. This error may also indicate that the docker daemon is not running.
I am not getting if docker is installed then why docker images and docker run are not working ?
Make sure the Docker service is runnig.
(1) Go to Services.
(2) Check service Docker for Windows is running.
You can stop/start the service as well using below commands in command prompt.
Net stop com.docker.service
Net start com.docker.service
Refer article : https://success.docker.com/article/docker-for-windows-fails-with-a-daemon-not-running-message
Have you manually started docker after the installation?
Install Docker Desktop on Windows
Docker requires win 10 pro because it needs some virtualization extensions (HyperV and Containers). Can these requirements be fulfilled on win 10 Home?
Yes, it can be done on Windows 10 Home (tried on win10Home v1809 27.01.2019)
Run in a command prompt as administrator:
Install Hyper-V:
pushd "%~dp0"
dir /b %SystemRoot%\servicing\Packages\*Hyper-V*.mum >hyper-v.txt
for /f %%i in ('findstr /i . hyper-v.txt 2^>nul') do dism /online /norestart /add-package:"%SystemRoot%\servicing\Packages\%%i"
del hyper-v.txt
Dism /online /enable-feature /featurename:Microsoft-Hyper-V -All /LimitAccess /ALL
pause
Install Containers:
pushd "%~dp0"
dir /b %SystemRoot%\servicing\Packages\*containers*.mum >containers.txt
for /f %%i in ('findstr /i . containers.txt 2^>nul') do dism /online /norestart /add-package:"%SystemRoot%\servicing\Packages\%%i"
del containers.txt
Dism /online /enable-feature /featurename:Containers -All /LimitAccess /ALL
pause
Edit registry keys:
REG ADD "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion" /f /v EditionID /t REG_SZ /d "Professional"
REG ADD "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion" /f /v ProductName /t REG_SZ /d "Windows 10 Pro"
Download and run official Docker Installer For Windows.
In my case the registry keys were restored after restart, but you could restore them manually:
REG ADD "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion" /v EditionID /t REG_SZ /d "Core"
REG ADD "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion" /v ProductName /t REG_SZ /d "Windows 10 Home"
There is now a better way to run Docker on Windows 10 Home edition.
The next version of Docker for Windows runs on WSL 2 and MS has made an exception for WSL 2, allowing it to use hyper-V even on Home editions of Windows 10.
My justification for calling this 'better' is that this is the future of Docker on Windows because Docker inc. feels that this is a considerably better solution, as they discuss in their announcements about this new version.
But if you want to take advantage of this solution now (pre-2019H2 Windows update) you will need to install an insiders edition of Windows in order to use the WSL 2 preview and then install the preview of the new Docker.
2020-07 Update
Windows 10, version 2004 is now GA so I thought I would add to this. The above still holds true, but here are some new resources...
https://arstechnica.com/gadgets/2020/06/whats-new-in-windows-10-build-2004/
And scroll down to 'Windows Subsystem for Linux, version 2' for a good short discussion.
And an updated link to the Docker install...
Install Docker Desktop Stable 2.3.0.2 (or later).
https://docs.docker.com/docker-for-windows/wsl/
This might help someone who cannot upgrade their system to pro or professional. Consider installing Docker Toolbox on Windows. For mac users: Docker Toolbox on Mac.
Check out difference Here
Legacy desktop solution. Docker Toolbox is for older Mac and Windows systems that do not meet the requirements of 'Docker Desktop for Mac' and 'Docker Toolbox on Windows'. We recommend updating to the newer applications, if possible.
As per documentation, the toolbox includes these Docker tools:
Docker Machine for running docker-machine commands
Docker Engine for running the docker commands
Docker Compose for running the docker-compose commands
Kitematic, the Docker GUI
a shell preconfigured for a Docker command-line environment
Oracle VirtualBox
If you want to use Docker directly within Windows, and you want to run Windows containers, there's still no official support. Docker Desktop won't allow it; it says "Windows Containers support requires a Windows 10 Pro or enterprise build >= 14372".
However, if you're interested in Linux containers, and you have WSL2 on your Windows 10 Home instance (which you'll have as of version 1903+), you don't need to install Docker Desktop.
(1) Setup a Linux instance via WSL2
Get into an elevated CLI prompt (CMD and PS both work fine):
Confirm you've got WSL2: wsl --status
Install Ubuntu: wsl --install
Same as wsl --install --distribution ubuntu
After you're forced to reboot, and you log back in, you'll get a specialized command prompt window that pops up. Setup you Linux user and password. (If you forget, you can do a wsl --user root followed by passwd {your-account-name} to fix it.)
Update: sudo apt update && sudo apt upgrade
Mine didn't have ifconfig: sudo apt install -y net-tools
If you want more info on how to control your instance(s), look at the Microsoft docs.
In general, getting "into" the default, Ubuntu instance within WSL is as easy as typing either "bash" or "ubuntu" from a regular CLI prompt. Though, I'd highly recommend installing "Windows Terminal" and using that instead.
(2) Install Docker
Open up a prompt inside your Linux instance. The general instructions are here, if you need more help. I used a Ubuntu instance.
Trust the docker repo's GPG key: curl -fsSL https://download.docker.com/linux/${ID}/gpg | sudo apt-key add -
Same idea as: curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo gpg --dearmor -o /usr/share/keyrings/docker-archive-keyring.gpg
Add their stable repo as a package source: echo "deb [arch=$(dpkg --print-architecture)] https://download.docker.com/linux/${ID} $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/docker.list
Same idea as: echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/docker.list > /dev/null
Update your local index: sudo apt update
Install docker!: sudo apt install -y docker-ce docker-ce-cli containerd.io
Add your account to the "docker" group: sudo usermod -aG docker $USER
Get that group change to be recognized:
Close all of your open sessions and wait ~10 seconds for the Linux instance to get shutdown automatically. Then open up a new session.
Close the window and force the instance to restart (from a Windows CLI prompt): wsl --terminate {distro-name} . Then open up a new session.
Start docker: sudo -b dockerd
Prove it's working: docker run --rm hello-world
Dockerd and services/auto-start concerns
WSL2 doesn't presently have a clean way to auto-start the dockerd daemon. There's a lot of workarounds on the 'Net. Some people start it via a Scheduled task that starts dockerd via wsl. Some people start it via a smart chunk of code in either .profile or .bashrc. Soon, there's supposed to be a officially supported approach via the "[boot]" section of the /etc/wsl.conf file, but it still doesn't appear to have landed in Windows 10 20H2 as it was suggested it would.
UPDATE 2021-11-25: I decided on adding this to my .profile (copied from here). It goes around sudo.
if service docker status 2>&1 | grep -q "is not running"; then
wsl.exe -d "${WSL_DISTRO_NAME}" -u root -e /usr/sbin/service docker start > /dev/null 2>&1
fi
Interactions with the Windows host
From a Linux instance into Windows, there's mount points: /mnt/{windows-drive-letter}/...
From Windows into a Linux instance, there's a magic "share": \\wsl$\{linux-instance-name}\...
More info on how file permissions work when crossing OS boundaries.
hello I just installed docker for windows on a windows 10 computer.
docker run -d -p 8787:8787 rocker/rstudio
gives me:
docker: error during connect: Post
http://%2F%2F.%2Fpipe%2Fdocker_engine/v1.35/containers/create: open
//./pipe/docker_engine: The system cannot find the file specified. In
the default daemon configuration on Windows, the docker client must be
run elevated to connect. This error may also indicate that the docker
daemon is not running. See 'docker run --help'
What I have done so far:
installed https://download.docker.com/win/stable/Docker%20for%20Windows%20Installer.exe
enabled virtualization in the BIOS
made sure that hyper-v is enabled
On my windows server 2016 tp5 virtual machine, I would like to create a simple native windows based docker example without virtualbox.
The example needs tomcat for windows and since this windows server 2016 docker container uses a shared windows kernel, installing tomcat should be straight forward, alas! Using the following powershell docker build command stops with non-zero code: 255
Dockerfile in c:\build:
FROM microsoft/windowsservercore
RUN powershell -Command wget -Uri mirror.klaus-uwe.me/apache/tomcat/tomcat-7/v7.0.70/bin/apache-tomcat-7.0.70-windows-x64.zip -OutFile "$env:TEMP\tomcat-7.0.70.zip"
Admin-powershell:
docker build c:\build
Result:
---> Running in 317a3572890e
The command 'cmd /S /C powershell -Command wget -Uri mirror.klaus-uwe.me/apache/tomcat/tomcat-7/v7.0.70/bin/apache-tomca
t-7.0.70-windows-x64.zip -OutFile "$env:TEMP\tomcat-7.0.70.zip"' returned a non-zero code: 255
Although the zip file has been downloaded in my users temp dir.
Can anybody tell me, how a native windows tomcat installation should look like, as I am not really deep in this stuff.
As mentioned here:
The error code "255" usually means that it is not able to find the file you are asking it to execute
So try and test with the full path and name of the binary(ies) involved in your RUN command line (like powershell)
But test also a simpler case:
RUN dir c:\Users\
This has been recently reported as failing with the same exit code 255, which would mean the latest docker on Windows Server 2016 Technical Preview 5 has a bug.