note: This error originates from a subprocess, and is likely not a problem with pip.error: legacy-install-failure during pillow installation in python - installation

C:\Windows\System32>pip install pillow
Collecting pillow
Using cached Pillow-9.4.0.tar.gz (50.4 MB)
Preparing metadata (setup.py) ... done
Building wheels for collected packages: pillow
Building wheel for pillow (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py bdist_wheel did not run successfully.
│ exit code: 1
╰─> [188 lines of output]
running bdist_wheel
running build
running build_py
creating build
creating build\lib.mingw_x86_64-cpython-310
creating build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\BdfFontFile.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\BlpImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\BmpImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\BufrStubImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ContainerIO.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\CurImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\DcxImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\DdsImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\EpsImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ExifTags.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\features.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\FitsImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\FitsStubImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\FliImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\FontFile.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\FpxImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\FtexImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\GbrImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\GdImageFile.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\GifImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\GimpGradientFile.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\GimpPaletteFile.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\GribStubImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\Hdf5StubImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\IcnsImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\IcoImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\Image.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageChops.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageCms.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageColor.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageDraw.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageDraw2.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageEnhance.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageFile.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageFilter.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageFont.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageGrab.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageMath.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageMode.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageMorph.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageOps.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImagePalette.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImagePath.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageQt.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageSequence.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageShow.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageStat.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageTk.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageTransform.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageWin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImtImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\IptcImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\Jpeg2KImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\JpegImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\JpegPresets.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\McIdasImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\MicImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\MpegImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\MpoImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\MspImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\PaletteFile.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\PalmImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\PcdImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\PcfFontFile.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\PcxImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\PdfImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\PdfParser.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\PixarImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\PngImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\PpmImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\PsdImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\PSDraw.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\PyAccess.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\SgiImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\SpiderImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\SunImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\TarIO.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\TgaImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\TiffImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\TiffTags.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\WalImageFile.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\WebPImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\WmfImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\XbmImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\XpmImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\XVThumbImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL_binary.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL_deprecate.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL_tkinter_finder.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL_util.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL_version.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL_init_.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL_main_.py -> build\lib.mingw_x86_64-cpython-310\PIL
running egg_info
writing src\Pillow.egg-info\PKG-INFO
writing dependency_links to src\Pillow.egg-info\dependency_links.txt
writing requirements to src\Pillow.egg-info\requires.txt
writing top-level names to src\Pillow.egg-info\top_level.txt
reading manifest file 'src\Pillow.egg-info\SOURCES.txt'
reading manifest template 'MANIFEST.in'
warning: no files found matching '.c'
warning: no files found matching '.h'
warning: no files found matching '.sh'
warning: no files found matching '.txt'
warning: no previously-included files found matching '.appveyor.yml'
warning: no previously-included files found matching '.clang-format'
warning: no previously-included files found matching '.coveragerc'
warning: no previously-included files found matching '.editorconfig'
warning: no previously-included files found matching '.readthedocs.yml'
warning: no previously-included files found matching 'codecov.yml'
warning: no previously-included files found matching 'renovate.json'
warning: no previously-included files matching '.git*' found anywhere in distribution
warning: no previously-included files matching '.pyc' found anywhere in distribution
warning: no previously-included files matching '.so' found anywhere in distribution
no previously-included directories found matching '.ci'
adding license file 'LICENSE'
writing manifest file 'src\Pillow.egg-info\SOURCES.txt'
running build_ext
The headers or library files could not be found for zlib,
a required dependency when compiling Pillow from source.
Please see the install instructions at:
https://pillow.readthedocs.io/en/latest/installation.html
Traceback (most recent call last):
File "C:\Users\clash\AppData\Local\Temp\pip-install-d3n0yu41\pillow_e681da05a7ad4f678d28ac5823e6daae\setup.py", line 993, in <module>
setup(
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\__init__.py", line 108, in setup
return distutils.core.setup(**attrs)
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\_distutils\core.py", line 185, in setup
return run_commands(dist)
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\_distutils\core.py", line 201, in run_commands
dist.run_commands()
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\_distutils\dist.py", line 969, in run_commands
self.run_command(cmd)
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\dist.py", line 1221, in run_command
super().run_command(command)
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\_distutils\dist.py", line 988, in run_command
cmd_obj.run()
File "C:\msys64\mingw64\lib\python3.10\site-packages\wheel\bdist_wheel.py", line 325, in run
self.run_command("build")
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\_distutils\cmd.py", line 318, in run_command
self.distribution.run_command(command)
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\dist.py", line 1221, in run_command
super().run_command(command)
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\_distutils\dist.py", line 988, in run_command
cmd_obj.run()
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\_distutils\command\build.py", line 131, in run
self.run_command(cmd_name)
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\_distutils\cmd.py", line 318, in run_command
self.distribution.run_command(command)
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\dist.py", line 1221, in run_command
super().run_command(command)
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\_distutils\dist.py", line 988, in run_command
cmd_obj.run()
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\command\build_ext.py", line 84, in run
_build_ext.run(self)
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\_distutils\command\build_ext.py", line 345, in run
self.build_extensions()
File "C:\Users\clash\AppData\Local\Temp\pip-install-d3n0yu41\pillow_e681da05a7ad4f678d28ac5823e6daae\setup.py", line 808, in build_extensions
raise RequiredDependencyException(f)
__main__.RequiredDependencyException: zlib
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "C:\Users\clash\AppData\Local\Temp\pip-install-d3n0yu41\pillow_e681da05a7ad4f678d28ac5823e6daae\setup.py", line 1010, in <module>
raise RequiredDependencyException(msg)
__main__.RequiredDependencyException:
The headers or library files could not be found for zlib,
a required dependency when compiling Pillow from source.
Please see the install instructions at:
https://pillow.readthedocs.io/en/latest/installation.html
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for pillow
Running setup.py clean for pillow
Failed to build pillow
Installing collected packages: pillow
Running setup.py install for pillow ... error
error: subprocess-exited-with-error
× Running setup.py install for pillow did not run successfully.
│ exit code: 1
╰─> [192 lines of output]
running install
C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\command\install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
warnings.warn(
running build
running build_py
creating build
creating build\lib.mingw_x86_64-cpython-310
creating build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\BdfFontFile.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\BlpImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\BmpImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\BufrStubImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ContainerIO.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\CurImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\DcxImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\DdsImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\EpsImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ExifTags.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\features.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\FitsImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\FitsStubImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\FliImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\FontFile.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\FpxImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\FtexImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\GbrImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\GdImageFile.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\GifImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\GimpGradientFile.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\GimpPaletteFile.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\GribStubImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\Hdf5StubImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\IcnsImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\IcoImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\Image.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageChops.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageCms.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageColor.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageDraw.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageDraw2.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageEnhance.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageFile.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageFilter.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageFont.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageGrab.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageMath.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageMode.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageMorph.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageOps.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImagePalette.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImagePath.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageQt.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageSequence.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageShow.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageStat.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageTk.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageTransform.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImageWin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\ImtImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\IptcImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\Jpeg2KImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\JpegImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\JpegPresets.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\McIdasImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\MicImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\MpegImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\MpoImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\MspImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\PaletteFile.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\PalmImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\PcdImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\PcfFontFile.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\PcxImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\PdfImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\PdfParser.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\PixarImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\PngImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\PpmImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\PsdImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\PSDraw.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\PyAccess.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\SgiImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\SpiderImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\SunImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\TarIO.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\TgaImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\TiffImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\TiffTags.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\WalImageFile.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\WebPImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\WmfImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\XbmImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\XpmImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL\XVThumbImagePlugin.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL_binary.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL_deprecate.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL_tkinter_finder.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL_util.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL_version.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL_init_.py -> build\lib.mingw_x86_64-cpython-310\PIL
copying src\PIL_main_.py -> build\lib.mingw_x86_64-cpython-310\PIL
running egg_info
writing src\Pillow.egg-info\PKG-INFO
writing dependency_links to src\Pillow.egg-info\dependency_links.txt
writing requirements to src\Pillow.egg-info\requires.txt
writing top-level names to src\Pillow.egg-info\top_level.txt
reading manifest file 'src\Pillow.egg-info\SOURCES.txt'
reading manifest template 'MANIFEST.in'
warning: no files found matching '.c'
warning: no files found matching '.h'
warning: no files found matching '.sh'
warning: no files found matching '.txt'
warning: no previously-included files found matching '.appveyor.yml'
warning: no previously-included files found matching '.clang-format'
warning: no previously-included files found matching '.coveragerc'
warning: no previously-included files found matching '.editorconfig'
warning: no previously-included files found matching '.readthedocs.yml'
warning: no previously-included files found matching 'codecov.yml'
warning: no previously-included files found matching 'renovate.json'
warning: no previously-included files matching '.git*' found anywhere in distribution
warning: no previously-included files matching '.pyc' found anywhere in distribution
warning: no previously-included files matching '.so' found anywhere in distribution
no previously-included directories found matching '.ci'
adding license file 'LICENSE'
writing manifest file 'src\Pillow.egg-info\SOURCES.txt'
running build_ext
The headers or library files could not be found for zlib,
a required dependency when compiling Pillow from source.
Please see the install instructions at:
https://pillow.readthedocs.io/en/latest/installation.html
Traceback (most recent call last):
File "C:\Users\clash\AppData\Local\Temp\pip-install-d3n0yu41\pillow_e681da05a7ad4f678d28ac5823e6daae\setup.py", line 993, in <module>
setup(
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\__init__.py", line 108, in setup
return distutils.core.setup(**attrs)
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\_distutils\core.py", line 185, in setup
return run_commands(dist)
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\_distutils\core.py", line 201, in run_commands
dist.run_commands()
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\_distutils\dist.py", line 969, in run_commands
self.run_command(cmd)
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\dist.py", line 1221, in run_command
super().run_command(command)
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\_distutils\dist.py", line 988, in run_command
cmd_obj.run()
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\command\install.py", line 68, in run
return orig.install.run(self)
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\_distutils\command\install.py", line 697, in run
self.run_command('build')
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\_distutils\cmd.py", line 318, in run_command
self.distribution.run_command(command)
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\dist.py", line 1221, in run_command
super().run_command(command)
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\_distutils\dist.py", line 988, in run_command
cmd_obj.run()
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\_distutils\command\build.py", line 131, in run
self.run_command(cmd_name)
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\_distutils\cmd.py", line 318, in run_command
self.distribution.run_command(command)
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\dist.py", line 1221, in run_command
super().run_command(command)
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\_distutils\dist.py", line 988, in run_command
cmd_obj.run()
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\command\build_ext.py", line 84, in run
_build_ext.run(self)
File "C:\msys64\mingw64\lib\python3.10\site-packages\setuptools\_distutils\command\build_ext.py", line 345, in run
self.build_extensions()
File "C:\Users\clash\AppData\Local\Temp\pip-install-d3n0yu41\pillow_e681da05a7ad4f678d28ac5823e6daae\setup.py", line 808, in build_extensions
raise RequiredDependencyException(f)
__main__.RequiredDependencyException: zlib
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "<string>", line 2, in <module>
File "<pip-setuptools-caller>", line 34, in <module>
File "C:\Users\clash\AppData\Local\Temp\pip-install-d3n0yu41\pillow_e681da05a7ad4f678d28ac5823e6daae\setup.py", line 1010, in <module>
raise RequiredDependencyException(msg)
__main__.RequiredDependencyException:
The headers or library files could not be found for zlib,
a required dependency when compiling Pillow from source.
Please see the install instructions at:
https://pillow.readthedocs.io/en/latest/installation.html
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: legacy-install-failure
× Encountered error while trying to install package.
╰─> pillow
note: This is an issue with the package mentioned above, not pip.
hint: See above for output from the failure.

Related

ERROR: Can't roll back Pillow; was not uninstalled

I am trying to install Odoo 13.0 as source installation on Ubuntu 20.04 and running the command to install the dependencies in requirements.txt file results in the following error.
Building wheels for collected packages: Pillow, psycopg2
Building wheel for Pillow (setup.py) ... error
ERROR: Command errored out with exit status 1:
command: /usr/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-05trsp81/Pillow/setup.py'"'"'; __file__='"'"'/tmp/pip-install-05trsp81/Pillow/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-41u8f0do
cwd: /tmp/pip-install-05trsp81/Pillow/
Complete output (174 lines):
running bdist_wheel
running build
running build_py
creating build
creating build/lib.linux-x86_64-3.8
creating build/lib.linux-x86_64-3.8/PIL
copying src/PIL/PaletteFile.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/__init__.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageMath.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/TarIO.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImagePalette.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/XbmImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageDraw2.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/_util.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/JpegImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/TiffImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/PcdImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImagePath.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/SpiderImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageMorph.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/SgiImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageFile.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/WebPImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/FtexImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/Image.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/_version.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/XVThumbImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/PixarImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/PcxImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImtImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/FontFile.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/GifImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/PngImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/TiffTags.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageQt.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/_tkinter_finder.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/MicImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/_binary.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/PalmImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/Hdf5StubImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageCms.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/CurImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/features.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/XpmImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/PsdImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageGrab.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/PcfFontFile.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/MpoImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageOps.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/IcnsImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/OleFileIO.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageColor.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ContainerIO.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/McIdasImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/DdsImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/DcxImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/FliImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageFont.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/PdfParser.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageShow.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/PyAccess.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/WalImageFile.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageChops.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/IcoImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ExifTags.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/JpegPresets.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/FpxImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/GribStubImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/FitsStubImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/WmfImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageStat.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageSequence.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/PpmImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/BdfFontFile.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageDraw.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/MpegImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageWin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/MspImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/GimpPaletteFile.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageMode.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageEnhance.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/PSDraw.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/GdImageFile.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/BufrStubImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/TgaImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/BmpImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/GimpGradientFile.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/Jpeg2KImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/IptcImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/GbrImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageTransform.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/BlpImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageFilter.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/PdfImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageTk.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/EpsImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/SunImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
running egg_info
writing src/Pillow.egg-info/PKG-INFO
writing dependency_links to src/Pillow.egg-info/dependency_links.txt
writing top-level names to src/Pillow.egg-info/top_level.txt
reading manifest file 'src/Pillow.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
warning: no files found matching '*.c'
warning: no files found matching '*.h'
warning: no files found matching '*.sh'
no previously-included directories found matching 'docs/_static'
warning: no previously-included files found matching '.appveyor.yml'
warning: no previously-included files found matching '.coveragerc'
warning: no previously-included files found matching '.codecov.yml'
warning: no previously-included files found matching '.editorconfig'
warning: no previously-included files found matching '.landscape.yaml'
warning: no previously-included files found matching '.readthedocs.yml'
warning: no previously-included files found matching '.travis'
warning: no previously-included files found matching '.travis/*'
warning: no previously-included files found matching 'tox.ini'
warning: no previously-included files matching '.git*' found anywhere in distribution
warning: no previously-included files matching '*.pyc' found anywhere in distribution
warning: no previously-included files matching '*.so' found anywhere in distribution
writing manifest file 'src/Pillow.egg-info/SOURCES.txt'
running build_ext
The headers or library files could not be found for jpeg,
a required dependency when compiling Pillow from source.
Please see the install instructions at:
https://pillow.readthedocs.io/en/latest/installation.html
Traceback (most recent call last):
File "/tmp/pip-install-05trsp81/Pillow/setup.py", line 765, in <module>
setup(name=NAME,
File "/usr/lib/python3/dist-packages/setuptools/__init__.py", line 144, in setup
return distutils.core.setup(**attrs)
File "/usr/lib/python3.8/distutils/core.py", line 148, in setup
dist.run_commands()
File "/usr/lib/python3.8/distutils/dist.py", line 966, in run_commands
self.run_command(cmd)
File "/usr/lib/python3.8/distutils/dist.py", line 985, in run_command
cmd_obj.run()
File "/usr/lib/python3/dist-packages/wheel/bdist_wheel.py", line 223, in run
self.run_command('build')
File "/usr/lib/python3.8/distutils/cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "/usr/lib/python3.8/distutils/dist.py", line 985, in run_command
cmd_obj.run()
File "/usr/lib/python3.8/distutils/command/build.py", line 135, in run
self.run_command(cmd_name)
File "/usr/lib/python3.8/distutils/cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "/usr/lib/python3.8/distutils/dist.py", line 985, in run_command
cmd_obj.run()
File "/usr/lib/python3.8/distutils/command/build_ext.py", line 340, in run
self.build_extensions()
File "/tmp/pip-install-05trsp81/Pillow/setup.py", line 612, in build_extensions
raise RequiredDependencyException(f)
__main__.RequiredDependencyException: jpeg
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "/tmp/pip-install-05trsp81/Pillow/setup.py", line 812, in <module>
raise RequiredDependencyException(msg)
__main__.RequiredDependencyException:
The headers or library files could not be found for jpeg,
a required dependency when compiling Pillow from source.
Please see the install instructions at:
https://pillow.readthedocs.io/en/latest/installation.html
----------------------------------------
ERROR: Failed building wheel for Pillow
Running setup.py clean for Pillow
Building wheel for psycopg2 (setup.py) ... error
ERROR: Command errored out with exit status 1:
command: /usr/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-05trsp81/psycopg2/setup.py'"'"'; __file__='"'"'/tmp/pip-install-05trsp81/psycopg2/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-ikueji9i
cwd: /tmp/pip-install-05trsp81/psycopg2/
Complete output (40 lines):
running bdist_wheel
running build
running build_py
creating build
creating build/lib.linux-x86_64-3.8
creating build/lib.linux-x86_64-3.8/psycopg2
copying lib/__init__.py -> build/lib.linux-x86_64-3.8/psycopg2
copying lib/extensions.py -> build/lib.linux-x86_64-3.8/psycopg2
copying lib/errors.py -> build/lib.linux-x86_64-3.8/psycopg2
copying lib/pool.py -> build/lib.linux-x86_64-3.8/psycopg2
copying lib/compat.py -> build/lib.linux-x86_64-3.8/psycopg2
copying lib/_range.py -> build/lib.linux-x86_64-3.8/psycopg2
copying lib/_ipaddress.py -> build/lib.linux-x86_64-3.8/psycopg2
copying lib/_lru_cache.py -> build/lib.linux-x86_64-3.8/psycopg2
copying lib/tz.py -> build/lib.linux-x86_64-3.8/psycopg2
copying lib/_json.py -> build/lib.linux-x86_64-3.8/psycopg2
copying lib/sql.py -> build/lib.linux-x86_64-3.8/psycopg2
copying lib/extras.py -> build/lib.linux-x86_64-3.8/psycopg2
copying lib/errorcodes.py -> build/lib.linux-x86_64-3.8/psycopg2
running build_ext
building 'psycopg2._psycopg' extension
creating build/temp.linux-x86_64-3.8
creating build/temp.linux-x86_64-3.8/psycopg
x86_64-linux-gnu-gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -g -fwrapv -O2 -g -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -DPSYCOPG_VERSION=2.8.3 (dt dec pq3 ext lo64) -DPG_VERSION_NUM=120002 -DHAVE_LO64=1 -I/usr/include/python3.8 -I. -I/usr/include/postgresql -I/usr/include/postgresql/12/server -c psycopg/psycopgmodule.c -o build/temp.linux-x86_64-3.8/psycopg/psycopgmodule.o -Wdeclaration-after-statement
In file included from psycopg/psycopgmodule.c:27:
./psycopg/psycopg.h:35:10: fatal error: libpq-fe.h: No such file or directory
35 | #include <libpq-fe.h>
| ^~~~~~~~~~~~
compilation terminated.
It appears you are missing some prerequisite to build the package from source.
You may install a binary package by installing 'psycopg2-binary' from PyPI.
If you want to install psycopg2 from source, please install the packages
required for the build and try again.
For further information please check the 'doc/src/install.rst' file (also at
<http://initd.org/psycopg/docs/install.html>).
error: command 'x86_64-linux-gnu-gcc' failed with exit status 1
----------------------------------------
ERROR: Failed building wheel for psycopg2
Running setup.py clean for psycopg2
Failed to build Pillow psycopg2
Installing collected packages: Pillow, polib, psutil, psycopg2, pyparsing, pydot, pyasn1, pyasn1-modules, python-ldap, PyPDF2, pyserial, pyusb, qrcode, reportlab, cached-property, defusedxml, isodate, requests-toolbelt, appdirs, attrs, zeep, python-stdnum, vatnumber, vobject, Werkzeug, XlsxWriter, xlwt, xlrd
Attempting uninstall: Pillow
Found existing installation: Pillow 7.0.0
Not uninstalling pillow at /usr/lib/python3/dist-packages, outside environment /usr
Can't uninstall 'Pillow'. No files were found to uninstall.
Running setup.py install for Pillow ... error
ERROR: Command errored out with exit status 1:
command: /usr/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-05trsp81/Pillow/setup.py'"'"'; __file__='"'"'/tmp/pip-install-05trsp81/Pillow/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-gpw95zju/install-record.txt --single-version-externally-managed --compile --install-headers /usr/local/include/python3.8/Pillow
cwd: /tmp/pip-install-05trsp81/Pillow/
Complete output (176 lines):
running install
running build
running build_py
creating build
creating build/lib.linux-x86_64-3.8
creating build/lib.linux-x86_64-3.8/PIL
copying src/PIL/PaletteFile.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/__init__.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageMath.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/TarIO.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImagePalette.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/XbmImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageDraw2.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/_util.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/JpegImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/TiffImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/PcdImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImagePath.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/SpiderImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageMorph.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/SgiImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageFile.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/WebPImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/FtexImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/Image.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/_version.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/XVThumbImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/PixarImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/PcxImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImtImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/FontFile.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/GifImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/PngImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/TiffTags.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageQt.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/_tkinter_finder.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/MicImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/_binary.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/PalmImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/Hdf5StubImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageCms.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/CurImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/features.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/XpmImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/PsdImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageGrab.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/PcfFontFile.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/MpoImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageOps.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/IcnsImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/OleFileIO.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageColor.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ContainerIO.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/McIdasImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/DdsImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/DcxImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/FliImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageFont.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/PdfParser.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageShow.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/PyAccess.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/WalImageFile.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageChops.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/IcoImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ExifTags.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/JpegPresets.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/FpxImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/GribStubImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/FitsStubImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/WmfImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageStat.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageSequence.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/PpmImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/BdfFontFile.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageDraw.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/MpegImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageWin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/MspImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/GimpPaletteFile.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageMode.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageEnhance.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/PSDraw.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/GdImageFile.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/BufrStubImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/TgaImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/BmpImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/GimpGradientFile.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/Jpeg2KImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/IptcImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/GbrImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageTransform.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/BlpImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageFilter.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/PdfImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/ImageTk.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/EpsImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
copying src/PIL/SunImagePlugin.py -> build/lib.linux-x86_64-3.8/PIL
running egg_info
writing src/Pillow.egg-info/PKG-INFO
writing dependency_links to src/Pillow.egg-info/dependency_links.txt
writing top-level names to src/Pillow.egg-info/top_level.txt
reading manifest file 'src/Pillow.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
warning: no files found matching '*.c'
warning: no files found matching '*.h'
warning: no files found matching '*.sh'
no previously-included directories found matching 'docs/_static'
warning: no previously-included files found matching '.appveyor.yml'
warning: no previously-included files found matching '.coveragerc'
warning: no previously-included files found matching '.codecov.yml'
warning: no previously-included files found matching '.editorconfig'
warning: no previously-included files found matching '.landscape.yaml'
warning: no previously-included files found matching '.readthedocs.yml'
warning: no previously-included files found matching '.travis'
warning: no previously-included files found matching '.travis/*'
warning: no previously-included files found matching 'tox.ini'
warning: no previously-included files matching '.git*' found anywhere in distribution
warning: no previously-included files matching '*.pyc' found anywhere in distribution
warning: no previously-included files matching '*.so' found anywhere in distribution
writing manifest file 'src/Pillow.egg-info/SOURCES.txt'
running build_ext
The headers or library files could not be found for jpeg,
a required dependency when compiling Pillow from source.
Please see the install instructions at:
https://pillow.readthedocs.io/en/latest/installation.html
Traceback (most recent call last):
File "/tmp/pip-install-05trsp81/Pillow/setup.py", line 765, in <module>
setup(name=NAME,
File "/usr/lib/python3/dist-packages/setuptools/__init__.py", line 144, in setup
return distutils.core.setup(**attrs)
File "/usr/lib/python3.8/distutils/core.py", line 148, in setup
dist.run_commands()
File "/usr/lib/python3.8/distutils/dist.py", line 966, in run_commands
self.run_command(cmd)
File "/usr/lib/python3.8/distutils/dist.py", line 985, in run_command
cmd_obj.run()
File "/usr/lib/python3/dist-packages/setuptools/command/install.py", line 61, in run
return orig.install.run(self)
File "/usr/lib/python3.8/distutils/command/install.py", line 589, in run
self.run_command('build')
File "/usr/lib/python3.8/distutils/cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "/usr/lib/python3.8/distutils/dist.py", line 985, in run_command
cmd_obj.run()
File "/usr/lib/python3.8/distutils/command/build.py", line 135, in run
self.run_command(cmd_name)
File "/usr/lib/python3.8/distutils/cmd.py", line 313, in run_command
self.distribution.run_command(command)
File "/usr/lib/python3.8/distutils/dist.py", line 985, in run_command
cmd_obj.run()
File "/usr/lib/python3.8/distutils/command/build_ext.py", line 340, in run
self.build_extensions()
File "/tmp/pip-install-05trsp81/Pillow/setup.py", line 612, in build_extensions
raise RequiredDependencyException(f)
__main__.RequiredDependencyException: jpeg
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "<string>", line 1, in <module>
File "/tmp/pip-install-05trsp81/Pillow/setup.py", line 812, in <module>
raise RequiredDependencyException(msg)
__main__.RequiredDependencyException:
The headers or library files could not be found for jpeg,
a required dependency when compiling Pillow from source.
Please see the install instructions at:
https://pillow.readthedocs.io/en/latest/installation.html
----------------------------------------
ERROR: Can't roll back Pillow; was not uninstalled
ERROR: Command errored out with exit status 1: /usr/bin/python3 -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-05trsp81/Pillow/setup.py'"'"'; __file__='"'"'/tmp/pip-install-05trsp81/Pillow/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-gpw95zju/install-record.txt --single-version-externally-managed --compile --install-headers /usr/local/include/python3.8/Pillow Check the logs for full command output.
I have tried to uninstall pillow but it never worked
sudo pip3 uninstall pillow
Found existing installation: Pillow 7.0.0
Not uninstalling pillow at /usr/lib/python3/dist-packages, outside environment /usr
Can't uninstall 'Pillow'. No files were found to uninstall.

How did you try to install Odoo? I had an similar problem with installing matplotlib when using pip3 install matplotlib.
When trying python3 -m pip install matplotlib it worked.
Before using this command I did an upgrade of pip and pillow but still got the mistake message.

This type of pillow library error i am face but easy solution is
you need to find first your python version:
and depends on python version using this library so it can be perfect install
let say right now i am using python3.8

AppVeyor can't restore fody.targets

I try to setup appveyor for my project on github. I added the "nuget restore" command to the pre build. But now I get this error message:
"C:\projects\moneyfox\Src\MoneyFox.sln" (default target) (1) ->
"C:\projects\moneyfox\Src\MoneyFox.Windows\MoneyFox.Windows.csproj" (default target) (2) ->
"C:\projects\moneyfox\Src\MoneyFox.Shared\MoneyFox.Shared.csproj" (default target) (3) ->
(EnsureNuGetPackageBuildImports target) ->
C:\projects\moneyfox\Src\MoneyFox.Shared\MoneyFox.Shared.csproj(276,5): error : This project references NuGet package(s) that are missing on this computer. Use NuGet Package Restore to download them. For more information, see http://go.microsoft.com/fwlink/?LinkID=322105. The missing file is ..\packages\Fody.1.29.4\build\portable-net+sl+win+wpa+wp\Fody.targets.
"C:\projects\moneyfox\Src\MoneyFox
What am I missing?

I managed to fix it by first let appveyor select the build configuration by his own and second by execute nuget restore directly on the sln file:
nuget restore Src\MoneyFox.sln

MSBuild AfterBuild event failing on my machine only - error MSB3073

We've got an after build event that uses ILMerge to combine all project assemblies into a single one. Up until recently, this all worked fine, and in fact does work fine on all the other development machines (and our build server).
The after build section in the .csproj file looks like:
<Target Condition="$(NCrunch) != '1'" Name="AfterBuild">
<CreateItem Condition="'%(Extension)'=='.dll' AND
$([System.Text.RegularExpressions.Regex]::
IsMatch(%(Filename),'CompanyName'))"
Include="#(ReferenceCopyLocalPaths)">
<Output ItemName="AssembliesToMerge" TaskParameter="Include"/>
</CreateItem>
<Message Importance="High" Text="============================"/>
<Message Importance="High" Text="MERGING: #(AssembliesToMerge->'%(Filename)')"/>
<Message Importance="High" Text="=================================="/>
<ExecCommand=""$(MSBuildProjectPath)..\..\..
\Libraries\dependencies\ILMerge\Ilmerge.exe" /internalize:"
$(MSBuildProjectPath)ILMerge-internalize-excludes.txt"
/targetplatform:"v4,C:\Program Files (x86)\
Reference Assemblies\Microsoft\Framework\
.NETFramework\v4.0" /allowDup /out:#(MainAssembly)
"#(IntermediateAssembly)" #(AssembliesToMerge->'"%
(FullPath)"', ' ')"/>
</Target>
When I pipe the output of msbuild into a text file I get:
Microsoft (R) Build Engine version 4.6.57.0
Microsoft .NET Framework, version 4.0.30319.0]
Copyright (C) Microsoft Corporation. All rights reserved.
Build started 19/05/2015 11:22:16.Project "C:\CWHG\Magnus\Source\Core\CompanyName\CompanyName.csproj"
on node 1 (default targets).
Project "C:\CWHG\Magnus\Source\Core\CompanyName\
CompanyName.csproj" (1) is building "C:\CWHG\Magnus\Source\Core\CompanyName.Core.Web
\CompanyName.Core.Web.csproj" (2) on node 1 (default targets).Project "C:\CWHG\Magnus\Source\Core\CompanyName.Core.Web\
CompanyName.Core.Web.csproj" (2) is building "C:\CWHG\Magnus\Source\Core\CompanyName.Core.ApplicationBlocks
\CompanyName.Core.ApplicationBlocks.csproj" (3) on node 1 (default targets).
GenerateTargetFrameworkMonikerAttribute:
Skipping target "GenerateTargetFrameworkMonikerAttribute"
because all output files are up-to-date with respect
to the input files.
CoreCompile:
Skipping target "CoreCompile" because all output files are up-to-date with respect to the input files.
CopyFilesToOutputDirectory:
CompanyName.Core.ApplicationBlocks -> C:\CWHG\Magnus\Source\Core\CompanyName.Core.ApplicationBlocks\bin\Debug\CompanyName.Core.ApplicationBlocks.dll
Done Building Project "C:\CWHG\Magnus\Source\Core\CompanyName.Core.ApplicationBlocks\CompanyName.Core.ApplicationBlocks.csproj" (default targets).
Project "C:\CWHG\Magnus\Source\Core\CompanyName.Core.Web\CompanyName.Core.Web.csproj" (2) is building "C:\CWHG\Magnus\Source\Core\CompanyName.Core\CompanyName.Core.csproj" (4) on node 1 (default targets).
Project "C:\CWHG\Magnus\Source\Core\CompanyName.Core\CompanyName.Core.csproj" (4) is building "C:\CWHG\Magnus\Source\Core\CompanyName.DataAccess\CompanyName.DataAccess.csproj" (5) on node 1 (default targets).
Project "C:\CWHG\Magnus\Source\Core\CompanyName.DataAccess\CompanyName.DataAccess.csproj" (5) is building "C:\CWHG\Magnus\Source\Core\CompanyName.Models\CompanyName.Models.csproj" (6) on node 1 (default targets).
Project "C:\CWHG\Magnus\Source\Core\CompanyName.Models\CompanyName.Models.csproj" (6) is building "C:\CWHG\Magnus\Source\Core\CompanyName.Utilities\CompanyName.Utilities.csproj" (7) on node 1 (default targets).
GenerateTargetFrameworkMonikerAttribute:
Skipping target "GenerateTargetFrameworkMonikerAttribute" because all output files are up-to-date with respect to the input files.
CoreCompile:
Skipping target "CoreCompile" because all output files are up-to-date with respect to the input files.
CopyFilesToOutputDirectory:
CompanyName.Utilities -> C:\CWHG\Magnus\Source\Core\CompanyName.Utilities\bin\Debug\CompanyName.Utilities.dll
Done Building Project "C:\CWHG\Magnus\Source\Core\CompanyName.Utilities\CompanyName.Utilities.csproj" (default targets).
GenerateTargetFrameworkMonikerAttribute:
Skipping target "GenerateTargetFrameworkMonikerAttribute" because all output files are up-to-date with respect to the input files.
CoreCompile:
Skipping target "CoreCompile" because all output files are up-to-date with respect to the input files.
CopyFilesToOutputDirectory:
CompanyName.Models -> C:\CWHG\Magnus\Source\Core\CompanyName.Models\bin\Debug\CompanyName.Models.dll
Done Building Project "C:\CWHG\Magnus\Source\Core\CompanyName.Models\CompanyName.Models.csproj" (default targets).
GenerateTargetFrameworkMonikerAttribute:
Skipping target "GenerateTargetFrameworkMonikerAttribute" because all output files are up-to-date with respect to the input files.
CoreCompile:
Skipping target "CoreCompile" because all output files are up-to-date with respect to the input files.
CopyFilesToOutputDirectory:
CompanyName.DataAccess -> C:\CWHG\Magnus\Source\Core\CompanyName.DataAccess\bin\Debug\CompanyName.DataAccess.dll
Done Building Project "C:\CWHG\Magnus\Source\Core\CompanyName.DataAccess\CompanyName.DataAccess.csproj" (default targets).
GenerateTargetFrameworkMonikerAttribute:
Skipping target "GenerateTargetFrameworkMonikerAttribute" because all output files are up-to-date with respect to the input files.
CoreCompile:
Skipping target "CoreCompile" because all output files are up-to-date with respect to the input files.
CopyFilesToOutputDirectory:
CompanyName.Core -> C:\CWHG\Magnus\Source\Core\CompanyName.Core\bin\Debug\CompanyName.Core.dll
Done Building Project "C:\CWHG\Magnus\Source\Core\CompanyName.Core\CompanyName.Core.csproj" (default targets).
GenerateTargetFrameworkMonikerAttribute:
Skipping target "GenerateTargetFrameworkMonikerAttribute" because all output files are up-to-date with respect to the input files.
CoreCompile:
Skipping target "CoreCompile" because all output files are up-to-date with respect to the input files.
CopyFilesToOutputDirectory:
CompanyName.Core.Web -> C:\CWHG\Magnus\Source\Core\CompanyName.Core.Web\bin\Debug\CompanyName.Core.Web.dll
Done Building Project "C:\CWHG\Magnus\Source\Core\CompanyName.Core.Web\CompanyName.Core.Web.csproj" (default targets).
Project "C:\CWHG\Magnus\Source\Core\CompanyName\CompanyName.csproj" (1) is building "C:\CWHG\Magnus\Source\Core\CompanyName.Logging\CompanyName.Logging.csproj" (8) on node 1 (default targets).
CoreCompile:
Skipping target "CoreCompile" because all output files are up-to-date with respect to the input files.
CopyFilesToOutputDirectory:
CompanyName.Logging -> C:\CWHG\Magnus\Source\Core\CompanyName.Logging\bin\Debug\CompanyName.Logging.dll
Done Building Project "C:\CWHG\Magnus\Source\Core\CompanyName.Logging\CompanyName.Logging.csproj" (default targets).
GenerateTargetFrameworkMonikerAttribute:
Skipping target "GenerateTargetFrameworkMonikerAttribute" because all output files are up-to-date with respect to the input files.
CoreCompile:
C:\windows\Microsoft.NET\Framework\v4.0.30319\Csc.exe /noconfig /nowarn:1701,1702 /nostdlib+ /errorreport:prompt /warn:4 /define:DEBUG;TRACE /highentropyva- /reference:C:\CWHG\Magnus\Source\Core\CompanyName.Core.ApplicationBlocks\bin\Debug\CompanyName.Core.ApplicationBlocks.dll /reference:C:\CWHG\Magnus\Source\Core\CompanyName.Core\bin\Debug\CompanyName.Core.dll /reference:C:\CWHG\Magnus\Source\Core\CompanyName.Core.Web\bin\Debug\CompanyName.Core.Web.dll /reference:C:\CWHG\Magnus\Source\Core\CompanyName.DataAccess\bin\Debug\CompanyName.DataAccess.dll /reference:C:\CWHG\Magnus\Source\Core\CompanyName.Logging\bin\Debug\CompanyName.Logging.dll /reference:C:\CWHG\Magnus\Source\Core\CompanyName.Models\bin\Debug\CompanyName.Models.dll /reference:C:\CWHG\Magnus\Source\Core\CompanyName.Utilities\bin\Debug\CompanyName.Utilities.dll /reference:"C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\.NETFramework\v4.0\mscorlib.dll" /reference:"C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\.NETFramework\v4.0\System.Core.dll" /debug+ /filealign:512 /optimize- /out:obj\Debug\CompanyName.dll /target:library /utf8output Properties\AssemblyInfo.cs "C:\Users\sthompson\AppData\Local\Temp\.NETFramework,Version=v4.0.AssemblyAttributes.cs"
CopyFilesToOutputDirectory:
Copying file from "obj\Debug\CompanyName.dll" to "bin\Debug\CompanyName.dll".
CompanyName -> C:\CWHG\Magnus\Source\Core\CompanyName\bin\Debug\CompanyName.dll
Copying file from "obj\Debug\CompanyName.pdb" to "bin\Debug\CompanyName.pdb".
AfterBuild:
====================================================================================================================================
MERGING: CompanyName.Core.ApplicationBlocks;CompanyName.Core;CompanyName.Core.Web;CompanyName.DataAccess;CompanyName.Logging;CompanyName.Models;CompanyName.Utilities
====================================================================================================================================
"..\..\..\Libraries\dependencies\ILMerge\Ilmerge.exe" /internalize:"ILMerge-internalize-excludes.txt" /targetplatform:"v4,C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\.NETFramework\v4.0" /allowDup /out:bin\Debug\CompanyName.dll "obj\Debug\CompanyName.dll" "C:\CWHG\Magnus\Source\Core\CompanyName.Core.ApplicationBlocks\bin\Debug\CompanyName.Core.ApplicationBlocks.dll" "C:\CWHG\Magnus\Source\Core\CompanyName.Core\bin\Debug\CompanyName.Core.dll" "C:\CWHG\Magnus\Source\Core\CompanyName.Core.Web\bin\Debug\CompanyName.Core.Web.dll" "C:\CWHG\Magnus\Source\Core\CompanyName.DataAccess\bin\Debug\CompanyName.DataAccess.dll" "C:\CWHG\Magnus\Source\Core\CompanyName.Logging\bin\Debug\CompanyName.Logging.dll" "C:\CWHG\Magnus\Source\Core\CompanyName.Models\bin\Debug\CompanyName.Models.dll" "C:\CWHG\Magnus\Source\Core\CompanyName.Utilities\bin\Debug\CompanyName.Utilities.dll"
The system cannot find the path specified.
C:\CWHG\Magnus\Source\Core\CompanyName\CompanyName.csproj(75,5): error MSB3073: The command ""..\..\..\Libraries\dependencies\ILMerge\Ilmerge.exe" /internalize:"ILMerge-internalize-excludes.txt" /targetplatform:"v4,C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\.NETFramework\v4.0" /allowDup /out:bin\Debug\CompanyName.dll "obj\Debug\CompanyName.dll" "C:\CWHG\Magnus\Source\Core\CompanyName.Core.ApplicationBlocks\bin\Debug\CompanyName.Core.ApplicationBlocks.dll" "C:\CWHG\Magnus\Source\Core\CompanyName.Core\bin\Debug\CompanyName.Core.dll" "C:\CWHG\Magnus\Source\Core\CompanyName.Core.Web\bin\Debug\CompanyName.Core.Web.dll" "C:\CWHG\Magnus\Source\Core\CompanyName.DataAccess\bin\Debug\CompanyName.DataAccess.dll" "C:\CWHG\Magnus\Source\Core\CompanyName.Logging\bin\Debug\CompanyName.Logging.dll" "C:\CWHG\Magnus\Source\Core\CompanyName.Models\bin\Debug\CompanyName.Models.dll" "C:\CWHG\Magnus\Source\Core\CompanyName.Utilities\bin\Debug\CompanyName.Utilities.dll"" exited with code 3.
Done Building Project "C:\CWHG\Magnus\Source\Core\CompanyName\CompanyName.csproj" (default targets) -- FAILED.
Build FAILED.
"C:\CWHG\Magnus\Source\Core\CompanyName\CompanyName.csproj" (default target) (1) ->
(AfterBuild target) ->
C:\CWHG\Magnus\Source\Core\CompanyName\CompanyName.csproj(75,5): error MSB3073: The command ""..\..\..\Libraries\dependencies\ILMerge\Ilmerge.exe" /internalize:"ILMerge-internalize-excludes.txt" /targetplatform:"v4,C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\.NETFramework\v4.0" /allowDup /out:bin\Debug\CompanyName.dll "obj\Debug\CompanyName.dll" "C:\CWHG\Magnus\Source\Core\CompanyName.Core.ApplicationBlocks\bin\Debug\CompanyName.Core.ApplicationBlocks.dll" "C:\CWHG\Magnus\Source\Core\CompanyName.Core\bin\Debug\CompanyName.Core.dll" "C:\CWHG\Magnus\Source\Core\CompanyName.Core.Web\bin\Debug\CompanyName.Core.Web.dll" "C:\CWHG\Magnus\Source\Core\CompanyName.DataAccess\bin\Debug\CompanyName.DataAccess.dll" "C:\CWHG\Magnus\Source\Core\CompanyName.Logging\bin\Debug\CompanyName.Logging.dll" "C:\CWHG\Magnus\Source\Core\CompanyName.Models\bin\Debug\CompanyName.Models.dll" "C:\CWHG\Magnus\Source\Core\CompanyName.Utilities\bin\Debug\CompanyName.Utilities.dll"" exited with code 3.
0 Warning(s)
1 Error(s)
Time Elapsed 00:00:00.78
However, the line below which is causing the error, when run manually through Command Prompt executes as expected.
"..\..\..\Libraries\dependencies\ILMerge\Ilmerge.exe"
/internalize:"ILMerge-internalize-excludes.txt"
/targetplatform:"v4,C:\Program Files (x86)
\Reference Assemblies\Microsoft\Framework\
.NETFramework\v4.0" /allowDup /out:bin\Debug\CompanyName.dll
"obj\Debug\CompanyName.dll"
"C:\CWHG\Magnus\Source\Core\
CompanyName.Core.ApplicationBlocks\bin\Debug\
CompanyName.Core.ApplicationBlocks.dll"
"C:\CWHG\Magnus\Source\Core\CompanyName.Core\
bin\Debug\CompanyName.Core.dll" "C:\CWHG\Magnus\Source\Core\CompanyName.Core.Web\
bin\Debug\CompanyName.Core.Web.dll" "C:\CWHG\Magnus\Source\Core\CompanyName.DataAccess\
bin\Debug\CompanyName.DataAccess.dll" "C:\CWHG\Magnus\Source\Core\CompanyName.Logging\
bin\Debug\CompanyName.Logging.dll" "C:\CWHG\Magnus\Source\Core\CompanyName.Models\
bin\Debug\CompanyName.Models.dll" "C:\CWHG\Magnus\Source\Core\CompanyName.Utilities\
bin\Debug\CompanyName.Utilities.dll"
It might be worth noting that I also get the same error when building normally in Visual Studio 2010.

Error while building cvblobs.lib with VS2010 and Windows7

I am trying to build cvblobslib in VS2010 with windows 7.
The cvblobs wiki page here
http://opencv.willowgarage.com/wiki/cvBlobsLib#Build_intructions
describes that to build you need to just open the project file and build it.However, for me working in VS2010 on windows 7 this does not build and gives the following error:
`c:\users\administrator\desktop\cvblobslib_opencv_v8_3\blob.h(21): fatal error C1083: Cannot open include file: 'cxcore.h': No such file or directory
1> ComponentLabeling.cpp
1>c:\users\administrator\desktop\cvblobslib_opencv_v8_3\blobcontour.h(6): fatal error C1083: Cannot open include file: 'cv.h': No such file or directory
1> BlobResult.cpp
1>c:\users\administrator\desktop\cvblobslib_opencv_v8_3\blobresult.h(24): fatal error C1083: Cannot open include file: 'cxcore.h': No such file or directory
1> BlobOperators.cpp
1>c:\users\administrator\desktop\cvblobslib_opencv_v8_3\blob.h(21): fatal error C1083: Cannot open include file: 'cxcore.h': No such file or directory
1> BlobContour.cpp
1>c:\users\administrator\desktop\cvblobslib_opencv_v8_3\blobcontour.h(6): fatal error C1083: Cannot open include file: 'cv.h': No such file or directory
1> Generating Code...
1>
1>Build FAILED.`
How do I remove these errors?There have been similar questions here but no-one has answered these satisfactorily.

Have you changed the include paths to point to your installation of OpenCV (opencv_install_path/include/)? This resides in Project -> Properties -> Configuration Properties -> C/C++ -> General -> Additional Include Directories.
Also specify the path to OpenCV libs (opencv_install_path/lib/) in Project -> Properties -> Configuration Properties -> Linker -> General -> Additional Library Directories and specify the static libs (opencv*.lib) that you need to use in Project -> Properties -> Configuration Properties -> Linker -> Input -> Additional Dependencies.

Error installing rpy2 2.2.1 on Mac OS X 10.6.8

I am trying to install rpy2 from a downloaded source archive 'rpy2-2.2.1.tar.gz'. I have been following the installation instructions provided from the rpy2 documentation. This is what I am doing:
tar -xzf rpy2-2.2.1.tar.gz
cd ~/Desktop/rpy2-2.2.1
python setup.py build install
And here is the output in terminal of the attempt:
running build
running build_py
creating build
creating build/lib.macosx-10.6-intel-2.7
creating build/lib.macosx-10.6-intel-2.7/rpy2
copying ./rpy/__init__.py -> build/lib.macosx-10.6-intel-2.7/rpy2
copying ./rpy/rpy_classic.py -> build/lib.macosx-10.6-intel-2.7/rpy2
copying ./rpy/tests.py -> build/lib.macosx-10.6-intel-2.7/rpy2
copying ./rpy/tests_rpy_classic.py -> build/lib.macosx-10.6-intel-2.7/rpy2
creating build/lib.macosx-10.6-intel-2.7/rpy2/rlike
copying ./rpy/rlike/__init__.py -> build/lib.macosx-10.6-intel-2.7/rpy2/rlike
copying ./rpy/rlike/container.py -> build/lib.macosx-10.6-intel-2.7/rpy2/rlike
copying ./rpy/rlike/functional.py -> build/lib.macosx-10.6-intel-2.7/rpy2/rlike
copying ./rpy/rlike/indexing.py -> build/lib.macosx-10.6-intel-2.7/rpy2/rlike
creating build/lib.macosx-10.6-intel-2.7/rpy2/rlike/tests
copying ./rpy/rlike/tests/__init__.py -> build/lib.macosx-10.6-intel-2.7/rpy2/rlike/tests
copying ./rpy/rlike/tests/test_container.py -> build/lib.macosx-10.6-intel-2.7/rpy2/rlike/tests
copying ./rpy/rlike/tests/test_functional.py -> build/lib.macosx-10.6-intel-2.7/rpy2/rlike/tests
copying ./rpy/rlike/tests/test_indexing.py -> build/lib.macosx-10.6-intel-2.7/rpy2/rlike/tests
creating build/lib.macosx-10.6-intel-2.7/rpy2/rinterface
copying ./rpy/rinterface/__init__.py -> build/lib.macosx-10.6-intel-2.7/rpy2/rinterface
creating build/lib.macosx-10.6-intel-2.7/rpy2/rinterface/tests
copying ./rpy/rinterface/tests/__init__.py -> build/lib.macosx-10.6-intel-2.7/rpy2/rinterface/tests
copying ./rpy/rinterface/tests/test_Device.py -> build/lib.macosx-10.6-intel-2.7/rpy2/rinterface/tests
copying ./rpy/rinterface/tests/test_EmbeddedR.py -> build/lib.macosx-10.6-intel-2.7/rpy2/rinterface/tests
copying ./rpy/rinterface/tests/test_Sexp.py -> build/lib.macosx-10.6-intel-2.7/rpy2/rinterface/tests
copying ./rpy/rinterface/tests/test_SexpClosure.py -> build/lib.macosx-10.6-intel-2.7/rpy2/rinterface/tests
copying ./rpy/rinterface/tests/test_SexpEnvironment.py -> build/lib.macosx-10.6-intel-2.7/rpy2/rinterface/tests
copying ./rpy/rinterface/tests/test_SexpExtPtr.py -> build/lib.macosx-10.6-intel-2.7/rpy2/rinterface/tests
copying ./rpy/rinterface/tests/test_SexpVector.py -> build/lib.macosx-10.6-intel-2.7/rpy2/rinterface/tests
copying ./rpy/rinterface/tests/test_SexpVectorNumeric.py -> build/lib.macosx-10.6-intel-2.7/rpy2/rinterface/tests
creating build/lib.macosx-10.6-intel-2.7/rpy2/robjects
copying ./rpy/robjects/__init__.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects
copying ./rpy/robjects/constants.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects
copying ./rpy/robjects/conversion.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects
copying ./rpy/robjects/environments.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects
copying ./rpy/robjects/functions.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects
copying ./rpy/robjects/help.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects
copying ./rpy/robjects/language.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects
copying ./rpy/robjects/methods.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects
copying ./rpy/robjects/numpy2ri.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects
copying ./rpy/robjects/packages.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects
copying ./rpy/robjects/robject.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects
copying ./rpy/robjects/vectors.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects
creating build/lib.macosx-10.6-intel-2.7/rpy2/robjects/tests
copying ./rpy/robjects/tests/__init__.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects/tests
copying ./rpy/robjects/tests/testArray.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects/tests
copying ./rpy/robjects/tests/testDataFrame.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects/tests
copying ./rpy/robjects/tests/testEnvironment.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects/tests
copying ./rpy/robjects/tests/testFormula.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects/tests
copying ./rpy/robjects/tests/testFunction.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects/tests
copying ./rpy/robjects/tests/testHelp.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects/tests
copying ./rpy/robjects/tests/testLanguage.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects/tests
copying ./rpy/robjects/tests/testMethods.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects/tests
copying ./rpy/robjects/tests/testNumpyConversions.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects/tests
copying ./rpy/robjects/tests/testPackages.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects/tests
copying ./rpy/robjects/tests/testRObject.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects/tests
copying ./rpy/robjects/tests/testRobjects.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects/tests
copying ./rpy/robjects/tests/testVector.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects/tests
creating build/lib.macosx-10.6-intel-2.7/rpy2/robjects/lib
copying ./rpy/robjects/lib/__init__.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects/lib
copying ./rpy/robjects/lib/ggplot2.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects/lib
copying ./rpy/robjects/lib/grid.py -> build/lib.macosx-10.6-intel-2.7/rpy2/robjects/lib
creating build/lib.macosx-10.6-intel-2.7/rpy2/interactive
copying ./rpy/interactive/__init__.py -> build/lib.macosx-10.6-intel-2.7/rpy2/interactive
copying ./rpy/interactive/process_revents.py -> build/lib.macosx-10.6-intel-2.7/rpy2/interactive
creating build/lib.macosx-10.6-intel-2.7/rpy2/interactive/tests
copying ./rpy/interactive/tests/__init__.py -> build/lib.macosx-10.6-intel-2.7/rpy2/interactive/tests
running build_ext
/Library/Frameworks/R.framework/Resources/bin/config: line 142: make: command not found
/Library/Frameworks/R.framework/Resources/bin/config: line 143: make: command not found
R was not built as a library
Traceback (most recent call last):
File "setup.py", line 441, in <module>
[os.path.join('doc', 'source', 'rpy2_logo.png')])],
File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/distutils/core.py", line 152, in setup
dist.run_commands()
File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/distutils/dist.py", line 953, in run_commands
self.run_command(cmd)
File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/distutils/dist.py", line 972, in run_command
cmd_obj.run()
File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/distutils/command/build.py", line 127, in run
self.run_command(cmd_name)
File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/distutils/cmd.py", line 326, in run_command
self.distribution.run_command(command)
File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/distutils/dist.py", line 971, in run_command
cmd_obj.ensure_finalized()
File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/distutils/cmd.py", line 109, in ensure_finalized
self.finalize_options()
File "setup.py", line 152, in finalize_options
config += get_rconfig(r_home, about)
File "setup.py", line 312, in get_rconfig
rc = RConfig.from_string(rconfig, allow_empty = allow_empty)
File "setup.py", line 272, in from_string
+ '\nin string\n' + string)
ValueError: Invalid substring
in string

If the make command is missing, chances are you need to install the Apple Xcode Developer Tools. There should be an installer for Xcode 3 somewhere on the DVD or other material that came with your Mac or copy of OS X 10.6. Or you can download it from the Apple Developer Connection website (free membership required). Or you can purchase Xcode 4 from the Mac App Store.

I am receiving the same error. But I am using the Easy_install. The Setup.py is what is generating the error. I only got a brief chance to examine the setup.py file last night, but I think I have figured it out.
This is what I am pursuing right now. The newest version of R, 2.13.1, appears to have added an additional directory layer to the R_Home Path. I suspect that the setup.py for the rpy2 is not expecting this difference and is not able to get past it. I will be investigating this today.
If it is the case, then I will follow this answer up with my actual fixes and the changed setup.py file.

Resources