I have a strange problem with WebSphere MQ Explorer 7.x.
I have configured the MQ Explorer for a proper connection with the queue manager. It worked well for a few months, and you could see, in the tree on the left, under queue managers, a listed node named "Queues". Clicking that opened a list of queues on the right.
But right now, I'm not able to list those queues, not even see the node "Queues", as shown in the screenshot below.
I tried to refresh the view (Ctrl+R, F5), reset perspective. Nothing helps.
How can I fix that?
I tried with v7.1 and v7.5.
I resolved the problem in the following way.
Right clicked on Queue Managers node.
Selected Show/Hide Queue managers....
Hidden my queue manager and applied the change.
Shown your queue manager and applied the change.
Queue manager appeared in the list on the left.
Clicked on the manager node in the list to connect.
Queues node appeared.
Click on IBM WebSphere MQ on the navigation panel, you will see a list of icons (on the right window) that indicate the possible states of your Queue Manager.
If your Queue Manager is "Running but disconnected from WebSphere MQ Explorer" you might be connected with a user that has no rights to see the Queues.
Related
I have inherited an IMB MQ (V6) system that has multiple brokers. Is there a way to explore everything succinctly ?
i.e. I know what queue managers are running, so without "runmqsc"ing each and every manager, how can i find broker names, listeners, etc ?
There is the Explorer running but again points to knowing the manager and port to have it connect successfully.
For MQ, the dmpmqcfg command can be useful to output your configuration info to a file.
For the broker, try the mqsilist command to list installed brokers and their associated resources.
this webpage may be of help to you:
Performing health checks for WebSphere Message Broker
http://www.ibm.com/developerworks/websphere/library/techarticles/0801_cui/0801_cui.html
To work out which queue managers are running on your machine, use thedspmq command. Then you'll know each queue manager and can runmqsc to each one, or point MQ Explorer to each one, or whatever you need to do next.
I am configuring WAS to connect to MQ via CCDT, and should be using a Queue Manager Name with wild cards, i.e *QMan.
It is accepted in the Queue Connection Factory Screen and in the Activation Spec Screen, but it is not accepted in the Queue Configuration Screen. As shown on the below image, I am forced to leave the Queue Manager field blank. And my application is not received MQ messages. I am suspecting this might be the reason.
Any ideas why I cannot configure the Queue Manager in Queue screen? And what is the common problem if message listener is not receiving, even if the MQPUT is working.
I had double checked my CCDT configuration in Activation Spec, and have check the jndi names, everything is configured correctly.
Also note that it is working if I connected directly to the MQ via host/port etc. But I have to use CCDT to utilize our MQ cluster.
The Queue Manager (or Queue Sharing Group) name on the JMS Queue panel defines where the queue is located and not how you connect to it. It is the Queue Manager name in the JMS connection factory or activation specification that defines which queue manager your application connections to.
So it is correct that you can't enter a * in this box.
If the connection is not working when using a CCDT then it is likely to be another problem that this Queue Manager name box. Note: you can't use an XA connection with CCDTs due to the fact that a CCDT won't guarantee you will connect back to the same queue manager in the event of XA recovery.
I'm a beginner on WebSphere MQ, I was working on MQ 6 and it was working fine, but now I've installed MQ 7.1 and when I try to create a new Queue Manager I can do it But it can't connect and it gives me the following error :
Do you have any idea about that? Thank you :)
You can look up any WebSphere MQ error code if either the WebSphere MQ Client or Server are installed using the mqrc command. In this case:
C:\Users\MUSR_MQADMIN>mqrc 2059
2059 0x0000080b MQRC_Q_MGR_NOT_AVAILABLE
The 2059 usually indicates that the listener is not running or the queue manager is down. There's a different error code if the listener is running and the QMgr name is wrong and another one if the connection is made to the right QMgr but the channel name is wrong. Sometimes you can get a 2059 if the channel was closed at the server side by an exit but since you didn't mention any exits, I'm assuming in this case that its listener problem.
Hopefully by now you are defining a listener object rather than using inetd or the runmqlsr command. Defining an object and setting it to start and stop under QMgr control is the most reliable way to configure it.
Once you get past the 2059, you should be aware that as of WMQ V7.1, the queue managers are secure by default and won't accept any remote client connections unless you explicitly authorize them. This is the opposite of the behavior of V6 where on a newly defined queue manager running a listener, anyone with a TCP route to it could administer it and remotely execute OS code as the mqm user. So I expect that the next problem you run into will be 2035 errors.
I've been told this means more work for the WMQ administrator. The only case in which that's true is if the V6 or earlier queue manager had been configured without security. If the tasks to secure a V7.0 QMgr are compared to the tasks to provision access on a v7.1 and higher QMgr are compared, provisioning access turnds out to be easier. However if you liked the V7.0 behavior, you can always alter the QMgr to disable CHLAUTH rules. Needless to say, leaving security enabled is highly encouraged.
To debug security errors, alter the QMgr to enable authorization events using the runmqsc command ALTER QMGR AUTHOREV(ENABLED). Next, download and install SupportPac MS0P into WebSphere MQ Explorer. Then when you do get a security error, use WebSphere MQ Explorer to look at the queue. Right-click on the queue and select the option to parse the event messages. This will tell you in excruciating detail all the information you need to debug the authorization error.
Finally, if you wish to read up on the new security features, go to t-rob.net/links and look at the conference presentations there. There are also some articles indexed if you scroll down.
In the screen-shot, I see hostname "127.0.0.1" and port # 1414. If it is a local queue manager then connect directly to it.
Also, each queue manager MUST use a unique port number. If you had it working with WMQ v6 queue manager, is this the same queue manager? If not, then make sure each queue manager uses a different port number (i.e. 1415, 1416, etc...)
I got same problem. but i resolved this by :
1. created a listener manually (define lstr(lstr1) port(xxxx) control(qmgr)
2. setmqaut mcauser('mqm').
I am new to Websphere, and at this client site, we are running an older version of Websphere in an older version of RAD. I used a python script to define a queue factory and some queues, using a script provided by another individual at the site. However, there was not mention of a queue manager in the script. It appears that the queues are created, I can see that they are defined in the Admin Console. Same is true for the queue factory. The admin console does not seem to expose the name of a queue manager, however.
I have been googling for a few days trying several different angles, but always come back to no answer. There seems to be tool called MQ Explorer, but that comes with Websphere MQ, which is not installed. No one here seems to have tried anything like this before, of if they have, may not have attempted what it is I am trying to achieve.
Ideally, what I would like to do would be to connect to the queue with a third party tool called MQ Visual Edit, for example.
There are about 3 or 4 questions here. Let's see if I can address all of them.
First, creating administered objects is completely separate from defining queues in the queue manager. Typically, the WebSphere MQ admin defines the queues and topics, then provides the host, port, channel, QMgr and queue/topic names to the WAS admin who then generates the matching connection factory and queue or topic objects. Defining the WAS objects does not create the corresponding WMQ objects, nor does it even imply that they exist. From your description, it sounds as though they may not have been defined on the QMgr.
In fact, it is not even obvious from your description that you are using MQ as your transport. If WAS is configured to use it's own JMS implementation (System Integration Bus or SIBus for short) then the connection factories and other objects may point to SIBus instead of WMQ. If you created a QCF for WMQ then someone should have already provided the details you are requesting - QMgr name, host, port and channel name.
WMQ Explorer is available as a free, stand-alone download called SupportPac MS0T. In order to use it, or any of the other 3rd party desktop tools such as MQ Visual Edit or SupportPac MO72 you will need to know the QMgr name as well as host, port and channel name. In addition, if the WMQ admin has enabled any security, you will need to be authorized to connect and, at a minimum, inquire on WMQ objects. The WMQ admin will provide these details to you. Assuming you have the QMgr details and are sufficiently authorized, just download and install SupportPac MS0T and point it at WMQ. Instructions on all things WMQ (including WMQ Explorer) are at the Infocenter pages. Since the stand-alone WMQ Explorer is V7 you will want the V7 Infocenter for any Explorer help. If the QMgr is at V6 then you may need to refer to the V6 Infocenter as well.
That answers the questions in the body of your post. The answer to the question in the title - how do I find out the QMgr name - is "ask the WMQ administrator." You should be given the name when you get the host, port and channel. That said, you often do not need it. A WMQ client will connect to any QMgr if provided the host, port and channel. This is what allows your client app to fail over to a different QMgr. Things like WMQ Explorer are the exception because they should not fail over. If you have a primary and backup QMgr, you typically want WMQ Explorer to see them both at the same time (so for example that you can configure them identically) and if one QMgr is down you want Explorer to report it as such. Therefore Explorer requires a QMgr name but most apps do not.
I am a novice with Websphere MQ and require some novice help.
I am using Websphere MQ Explorer to connect to a queue but do not know how to write the connection string. I have all the details (host, port, channel, queue manager name) but do not know how to put them together correctly as a connection string.
Can any help this novice?
Thanks
Here is one way to get you started (assuming your queue manager under default configuration):
Queue Managers->Context Menu->Add Remote Queue Manager
Fill in Queue manager name:
Select Connect directly
Next
Fill in:
Host name or IP Address:
Port number:
Server-connection channel:
Next
Next
If you have a user configured usually mqm user, you will need to tick the "Enable user identification" here and fill in the user/pass here.
Next, Next, Finish.
As you see, you might need to fill in other information such as SSL if you configured it at the target queue manager.
Then you should be able to see the queue manager in the tree. Click on the Queues icon to find the queue you care about.
Hopefully you are using the latest WebSphere MQ Explorer which is now a stand-alone download. You can find it at SupportPac MS0T which is available from the main SupportPac page. There are significant advantages to using that version, including Explorer Plug-Ins for WMQ FTE, WebSphere Message Broker, the MS0P plug-in which parses event messages, and more.
The screen shot below shows the connection dialog in the latest WMQ Explorer. It has separate fields for hostname (or IP address). port and channel. Just plug in the appropriate values and you are good to go!