I'm very new to Linux and I'm using UBUNTU to run a code! when I use 'make' command to compile my 'Makefile' I get this error:
make:*** [mod_param.o] Error 127
could anyone tell me what is this error and why this happen?
Thanks in advance!
Whenever reading the output of a build, you want to go up and find the FIRST error message. That's almost always the important one. Once something fails, the rest of the errors might be cascading problems from the first one. In this case, that message is just make telling you that it tried to compile mod_param.c and it didn't work. You'll have to look at the messages BEFORE this one to see why the compile failed.
Related
I'm cross-compiling ecasound, which goes well up to the point that all binaries get compiled, but fails during (at the end of?) the installation phase.
The thing is, I don't see any error message or anything, so I'm left guessing here:
ecasound: installs files in /home/buildroot/buildroot-2018.02-rc2/output/target//home/buildroot/buildroot-2018.02-rc2/output
make[1]: *** [/home/buildroot/buildroot-2018.02-rc2/output/build/ecasound-2.9.1/.stamp_target_installed] Error 1
make: *** [_all] Error 2
Full output: https://pastebin.com/ca6FJebB (hope this contains enough details)
Presumably the ecasound 'make install' returns (silently?) with an error. We don't have an ecasound package in upstream Buildroot, so it is hard to know what you are doing, but the install location (../output/target/home/buildroot/..) certainly looks wrong.
It did work after first doing a complete build, followed by ecasound seperately, indicating it was missing dependencies. Turned out the missing piece here was: BR2_PACKAGE_PYTHON_CURSES.
In case anyone wants to build ecasound for buildroot, a working package is available in my github account.. Not sure if it's clean code/by the book, but it works..
The problem is your install path somehow duplicated itself
/home/buildroot/.../target//home/buildroot/...
I have seen this several times too, and havent really found a way to fix it except to make clean & make again
I have just started working on a project in windows environment. The project is compiled and build using make command which compiles and generates the executables. It is a C# project. However, when I run the make command to build, I get the following error -- E:\GJoaquin\depot\sim\joaquin>make
was unexpected at this time.
"Error: "WORKSTATION_VERSION not defined. Please define in test test bora/publi
/vm_version.h.""
was unexpected at this time.
was unexpected at this time.
! was unexpected at this time.
make: *** [default] Error 255
I am not very knowledgeable on make files. Not sure which make file and which line in that make file might be causing the problem. Do you have any idea on how to debug this?
I am trying to build Linux for my Raspberry Pi 3.
When I do make, I get the below error.
make[2]: /home/rohit/workplace/rp/buildroot/output/host/usr/bin/arm-buildroot-linux-uclibcgnueabihf-gcc: Command not found
A little background will help. I am following this link . To summarize this is what I ran.
make raspberrypi3_defconfig
make linux-menuconfig
make
From the error I get that the cross gcc is not available at the path as it should be. But I am not sure what I am missing.
The complete log of the make is pasted here. The output/host/usr/bin folder also doesn't contain arm-buildroot-linux-uclibcgnueabihf-gcc, though it does contain arm-buildroot-linux-uclibcgnueabi-gcc. I have pasted the contents of the folder here.
Please help.
i was having this problem and after a make clean the problem was solved. I think the error was because different toolchains used in different builds. The manual says that is one of the cases that you have to do a make clean
I intend to make modifications to the Minix kernel. But before I start, I want to compile it, so that I know any further compilation issues are caused by things that I did.
I have obtained the Minix 3 source code from github, where it is mirrored:
git clone git://github.com/minix3/minix
Now, I wish to compile it before making any modifications to the code. When I do make in src, I get the message
Makefile:109: *** missing separator. Stop.
I tried compiling just the kernel by doing make in src/minix/kernel. In this case, I get the message
Makefile:2: *** missing separator. Stop.
How do I circumvent this problem? How do I compile the Minix source?
Minix building procedure is different. Please read through Crosscompiling MINIX with build.sh and MinixOnARM before trying anything. The Makefile under minix/kernel is not designed in normal as to compile with a simple make command. check if you are able to compile with build.sh tool at the minix/ folder
This is how I do it: After logging in as root I navigate to /usr/src/tools and type in "make new fresh" (no quotations). It then compiles.
If you've made changes and you want Minix to boot to that new image, then do the following: After it finishing compiling it will say "Done." Then type in "shutdown -h now". Then at the next prompt type in "exit". It will then start to reboot. Hit "3" and then Minix will boot to that custom boot image you just made when you did the "make new fresh."
I'm using minix3 on VMware Player and i'm having trouble compiling a system call.
I actually tried to see if i can add a simple command in a system call just to see that working and i put a simple printf("my message"); in protect.c file which it is on usr/src/servers/vfs.
I saved it, and tried to compile it with make command while i am on vfs directory.
It says that protect.c is up to date.
I try change a file's owner (protect.c has the chown mode code in it) and i'm waiting as a result my message. Instead it's just run the command correctly without printing my message.
I assume that i did something wrong with compiling and i'm searching for hours over the internet trying to fix it. But the only command that cames repeatedly is make hdboot. I know that this command it's not gonna work because i'm using minix3 as a virtual OS, but i tried it just to confirmed it and as i said didn't work.
Is anyone know anything about compiling in minix3?
IF your problem is indeed with compilation and you've implemented your system call correctly then after making any edits in /usr/src you should call "make install" from /usr/src/releasetools and then call "reboot" to restart minix