My installer is created using PackageMaker. After that I codesigned the installer using the following command.
productsign --sign 'Blah, Inc.' Install.mpkg/ CS/Install.mpkg
This seem to work pretty well and I could see that it is signed using the following command.
pkgutil --check-signature Install.mpkg
Since the certificate is installed on my system in keychain, the installer seem to show a little lock on top right corner. Clicking this opens up the certificate.
If the installer is placed in a system without the certificate installed the lock is no longer seen. However I could still run the command to check for certificate.
1) Is there a graphical way to check for code signing before installing? (I do not want to run command line)
2) I removed a folder from the mpkg file using finder to see if the installer will complain of tampering. But that does not happen. Is there a way the installer can stop install if it is tampered?
3) I also code signed all the binaries in my package (mostly daemons) using xcode's option to use certificate. Again I am able to see the binary as signed, however I do get a message
kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=224[MyDaemon] clearing CS_VALID.
Googling, I found http://feedback.photoshop.com/photoshop_family/topics/photoshop_13_0_4_x64_how_can_i_get_rid_of_the_could_not_complete_your_request_because_of_a . However I am still not very clear what they are getting at. Could someone help me?
You can sign .mpkg packages but you must sign it with the Developer ID Application cert and not the Developer ID Installer cert.
When you sign the .mpkg you get a number a warnings that the inner packages must be signed but the signing seems to be valid with or without the inner .pkg signed.
I have tested that modifying an internal .pkg causes the .mpkg to fail the Gatekeeper check
So for the each internal .pkg files you should:
sudo productsign --sign "<Developer ID Installer: Cert>" "<source.mpkg>/Contents/Packages/<source.pkg>" "<destination.mpkg>/Contents/Packages/<source.pkg>"
for then for the .mpkg do:
sudo productsign --sign "<Developer ID Application: Cert>" "<Source .mpkg>" "<Destination .mpkg>"
You can sign only flat packages. Your package has extension .mpkg which I believe is the older bundle format. Make sure you are using flat packages if you want to sign them.
Related
I am creating a .pkg file using “Packages” application.
Previously I would able to create .pkg file with certificate also but now this give me Build Failed error. while If I remove certificate than I can Build .pkg.
Even I am not able to get any error log for error message. If anyone has any better tool or method to create package file and dmg file please tell me.
It is my understanding that signing with Packages presently does not work well. I think there is something in the manual about that, in fact. I build my package with Packages first, then sign it with productsign --sign <sign-id> <src-path> <dst-path>. The <sign-id> should be your "Developer ID Installer" identity, I think. This has been working well for me. You can then verify that the signing worked using spctl -a -v --type install <path>, where <path> is the path to the signed package made by productsign.
cd /location to app
productbuild --component "appname.app" /Applications --sign "3rd Party Mac Developer Installer: Company Name Private Limited" --product "appname.app/Contents/Info.plist" "appname.pkg"
Try PackageMaker application; it is good.
Use above command on terminal and your pkg will be good to go.
I got the cause of this error.
Problem was in my keychain, since I updated my OS to 10.12.3 I was facing this issue. so to resolve this I checked out my keychain where I found my Installer certificate in “Login” part (see image1)
image 1:
so I copy this certificate in System part also (see image 2). All problem goes away, If any time I face this issue again I check keychain again. Problem solved.
image 2:
Currently I am working on submitting an app to the mac app store. I have gone through several steps but am stuck on the last one. This is as I am trying to build my .app file (made in unity) into a .pkg so I am able to Deliver it to iTunes connect via application loader.
I am entering this command into terminal:
productbuild --component GAMENAME.app /Applications --sign "3rd Party Mac Developer Installer: DEVELOPER NAME" GAMENAME.pkg
For some reason though, after entering even though I don not get an error:
Usage: productbuild [--product <requirements-plist>] {--component <component-path> <install-path>} <product-output-path>
Build product with a self-contained bundle, e.g. for the Mac App Store
Usage: productbuild {--content <content-path>} <product-output-path>
Build product with in-app content
Usage: productbuild [--product <requirements-plist>] {--root <root-path> <install-path>} <product-output-path>
Build product with an xcodebuild destination root
Usage: productbuild [options] --distribution <dist-path> [--package-path <search-path>] <product-output-path>
Build product with a distribution and the packages it references
Usage: productbuild --synthesize [--product <requirements-plist>] {--package <pkg-path>} <distribution-output-path>
Synthesize and write a distribution from component packages
See productbuild(1) for details.
I cannot find the .pkg file that has just been built...
I am not sure if this is because it is hidden somewhere or if I have made a mistake I'm unaware of, but any help would be appreciated
So, in short This question basically is how to make a .app to a .pkg which can be using application loader uploaded to iTunes connect...
EDIT:
Ok as someone suggested I might have gotten the initial terminal command wrong after all so any suggestions on where I went wrong would be appreciated.
Your developer name must be followed by the team ID.
Like - "DEVELOPER NAME (ABC123456)"
I develop a Mac app with Qt5, so outside Xcode. I want GateKeeper to allow my app to run on clients' computers rather than issuing the "Can't be opened because the identity of the developer cannot be confirmed" warning.
I have successfully digitally signed the app but GateKeeper still comes with this complaint. I have an Apple developer certificate (I am the Team Agent) and my keychain says it is valid. I also have installed two Apple root certificates.
I use the command line utility codesign to digitally sign all the binaries inside the app folder and in addition I digitally sign the app folder itself. In all cases the response of codesign is informative and displays no error. With codesign I can check that indeed all the binaries are signed, running
$ codesign --verify --deep --verbose=2 MyApp.app
shows that all binaries are validated. And in addition it reports:
MyApp.app: valid on disk
MyApp.app: satisfies its Designated Requirement
Running:
$ codesign -v --verbose=4 --display MyApp.app
gives
Executable=/Users/xxx/trunk/yyy/deploy/release/MyApp.app/Contents/MacOS/MyApp
Identifier=aaaa.MyApp
Format=bundle with Mach-O thin (x86_64)
CodeDirectory v=20200 size=12461 flags=0x0(none) hashes=616+3 location=embedded
Hash type=sha1 size=20
CDHash=d1c12c783dac0e8d9a2b749fb896b11558cec8b6
Signature size=8532
Authority=Developer ID Application: XXXXX
Authority=Developer ID Certification Authority
Authority=Apple Root CA
Timestamp=29 jul. 2015 12;04:40
Info.plist entries=8
TeamIdentifier=YYYYY
Sealed Resources version=2 rules=12 files=10
Internal requirements count=1 size=180
which seems OK.
Running
$ spctl -a -t exec -vv MyApp.app
on all binaries gives as result
MyApp.app: accepted
source=Developer ID
origin=Developer ID Application: XXXX
which also seems OK
Running the XCode command line tool check-signature
on the app or on the binaries inside the app folder:
$ ./check-signature /Users/xxx/trunk/yyy/release/MyApp.app
gives as result
(c) 2014 Apple Inc. All rights reserved.
YES
which in all cases is the desired result.
But GateKeeper still does not accept the app and complains about the fact that the developer cannot be confirmed.
[added by author on Friday July 17, 2015]
I think I have found the problem. I do not know whether it is a feature or an OSX bug. I was helped a lot by stackoverflow question 19551298.
Whenever a file is downloaded from the internet it gets an extended file attribute com.apple.quarantine associated with it. When double-clicking on this downloaded file in Finder, GateKeeper has two possibilities:
When the file is not signed it issues the "Unidentified developer etc" message
When the file is digitally signed it issues the "Developer cannot be confirmed etc" message
In both cases the MessageBox has only one button, an OK button. When this button is clicked nothing happens, apart from the MessageBox closing.
If the extended attribute is deleted (xattr -d) the applications runs, signed or not.
The behavior is different when the applications is started by right-mouse-button-clicking in Finder on the app and then click on the "open" menu action. Again one of the two messageboxes is shown, but now with an extra button to allow the user to open the app anyway. Again the only difference between signed and not signed is the "Unidentified" or the "Not confirmed" message. I do not expect my customers to be able to tell the differende. As a result signing the app is an exercise in futility.
On the basis of the Apple Support Documentation I expected another, much nicer behavior of GateKeeper when double clicking a downloaded app (perhaps the documentation is outdated, or I misread it):
if the app is signed GateKeeper should show a MessageBox with "Downloaded from the internet etc" and a button with "Proceed anyway?"
if the app is not signed a MessageBox with a single OK button and a text "Unidentified developer etc.."
Sorry for answering my own question, but I see no other way as editing the original question would lead to spaghetti text.
I finally solved my problem. First the credit: (i) The answer to my other stackoverflow question was very useful and (ii) I got very good (paid) advice from an official Apple developer, by filing a so-called Technical Support Incident (TSI).
On the basis of all this I am now able to give here a very concise recipe of how getting your Mac app successfully treated by GateKeeper. After detailing the recipe I will show what my original mistake was.
Goal: After having developed a Mac app outside Xcode to have GateKeeper issuing the warning "Downloaded from the Internet ..." with three buttons, one of which is "open".
Failure: When GateKeeper issues a warning with either the text ".. unidentified developer.." or the text ".. unconfirmed developer .. " with - in both cases - a messagebox with a single OK button.
Getting your app GateKeeper-ready involves three steps:
Make your app standalone with no unacceptable external dependencies. The only acceptable external dependences are system libraries. All other dependencies should have been copied to your MyApp.app folder. GateKeeper rejects any app that has non-system external dependencies
Binaries should not be located at illegal positions inside the MyApp.app folder. Libraries go into MyApp/Contents/Frameworks and the executable goes into MyApp/Contents/MacOS
All binaries inside MyApp should be digitally signed. Then the MyApp.app folder should be signed. For this signing an Apple "Developer ID Application ..." certificate is necessary
Our recipe is automatic. All the work is done by one script. In case of Qt Creator we use a qmake script where we access the system shell through the $$system command. When using either of the (Xcode) system commands codesign, spctl or check-signature we assume you have redirected stderr to stdout as outlined in answer to question . Otherwise you will not be able to catch the system response when running these utilities. In the following we will not explicitly show this redirection.
HERE IS OUR RECIPE
A. Making the app stand-alone:
copy (with a script) all the needed binaries to the MyApp.folder
run (with a script) install_name_tool -change and install_name_tool -id such that all dependences inside the app are of the relative type #executable_path/../MacOS.. or #executable_path/../Frameworks
run (with a script) otool -L on all binaries inside the MyApp.app folder and flag any illegal dependence, like "#rpath..." or absolute file paths not being system paths. Note that otool -L is not guaranteed to find all dependencies. Plugins are often beyond the horizon of otool. That is why you need the next check.
start a terminal at the location "MyApp.app/Contents/MacOS". Run export DYLD_PRINT_LIBRARIES=1. Then run inside the same terminal window ./MyApp. Your terminal will fill up with over hundred loaded libraries. Check this list again for forbidden libraries (libraries present on your computer, but not on the computer of your customers).
proof of the pudding is in the eating. We use the MacInCloud virtual machines and check whether or not our app runs there. Alternative solution could be the Mac of a relative who is not a developer. Or you could also create a new user ("test") on your own Mac and copy the app to its Download (or Desktop folder, or ...). In the latter case you must temporarily rename the root folder of your IDE as otherwise the user "test" will find the missing binaries there.
B Signing the app
Signing: With our script we run codesign --force --verify --verbose --sign \"Developer ID Application: ....\" \"/path/to/binary\" on all the binaries in the app and then on the app folder itself. In each case the system response is caught. It should contain in each case the string "signed Mach-O thin".
Verification: Run (with a script) command codesign --verify --verbose \"/path/to/binary\" on each binary in your app and on the app itself and catch the system response. It should in each case contain the strings "valid on disk" and "satisfies its Designated Requirement".
GateKeeper check: Run (with a script) spctl -a -t exec -vv /path/to/binary\" on each binary and on the app folder itself. The system response is caught. It should contain in all cases the string "accepted source".
check-signature: Run (with a script) check-signature \"/path/to/banary\" on each binary and on the app folder itself. The system response is caught. It should contain the string "YES" in each case.
C External check
zip your app into a single zip file. Upload to one of your cloud servers
GateKeepers keeps a long list (typically hundreds of items) of exceptions on its general gate-keeper role. Your app must not be in that list if you want to test GateKeeper. Rather than editing this list a much simpler trick is creating a new user on your Mac. Log in to that user and download the zip file from the Internet cloud server. Finder will automatically uncompress it. Click on it. If GateKeeper tells you that it can open the application but it warns you at the same time that it is downloaded from the Internet, it is time to grab a (white) beer.
Here the desired GateKeeper warning:
My mistake
I did much of the installing and signing without explicitly checking the result for each binary. After that I would use otool -L on a number of binaries but not on all. I missed the fact that upgrading to Qt 5.5 from an earlier Qt version the binary libqminimal.dylib has acquired an extra dependency, viz.: QtDBus. I had not noticed it, but GateKeeper did.
Qt developers might wonder why we not just use macdeployqt for deploying Qt application on a Mac. In the first place we do not like not to use ill-documented black-box utilities. On Internet fora there are quite a number of people reporting issues with macdeployqt. In addition the Qt libraries can have different install locations (as reported by otool-L) when comparing different Qt versions. When we have a new Qt version our script will immediately start to yell about forbidden dependencies. In this way we get information about what has changed in this new version.
adlag's question and self-answer was invaluable in helping me overcome the same issue. However, as good as his recipe is, some statements are not quite right, so I'd like to offer a few additional points.
It's not necessary to replace #rpath entries in your binaries and dynamic libraries with #executable_path statements. #rpath statements are fine so long as the actual rpath entries embedded in the binaries are not absolute. You can find plenty of valid Qt app bundles that use rpath. You can make it work doing what adlag said, but you may be making work for yourself.
See jil's comment above for how to use otool -l $file | grep -A2 LC_RPATH and install_name_tool -delete_rpath $path $file to inspect and remove the embedded paths in your binaries and libraries
See https://developer.apple.com/library/content/technotes/tn2206/_index.html#//apple_ref/doc/uid/DTS40007919-CH1-TNTAG207 for a clear explanation of why GateKeeper complains about paths in your binaries, and how you can see the specific complaint in syslog.
If you have a problem with absolute paths, you should first try to fix your build, rather than use install_name_tool after the fact.
If you're using cmake, this is likely helpful: https://cmake.org/Wiki/CMake_RPATH_handling#Mac_OS_X_and_the_RPATH
Don't run spctl -a -t exec -vv /path/to/binary on dylib files. You will get errors about the resource envelope. This is expected, and not a problem.
In my experience, macdeployqt works fine. I solved the problem by changing my build, such that the absolute paths did not get into the offending dylib file (libquazip). I still used install_name_tool to remove the absolute paths to the Qt installation. I then used macdeployqt to create the bundle, sign the bundle and create the DMG file.
My two bits:
To really verify codesigning, I had to either upload my DMG to a
server and download it using a browser or set the quarantine attribute manually:
APP_PATH="Any.app"
xattr -w com.apple.quarantine '0081;5a37dc6a;Google Chrome;F15F7E1C-F894-4B7D-91B4-E110D11C4858' "$APP_PATH"
xattr -l "$APP_PATH" # You should see the quarantine attribute here
open "$APP_PATH"
If your app is correctly signed, you should see a system dialog with
an "Open" button.
I found the value of the quarantine attribute by looking at another
.app downloaded from the internet. I don't know what the value
means.
I don't really understand why the spctl command says "accepted" even
if the Gatekeeper service denies opening the app.
I had the "unidentified developer" message box because my Qt frameworks were referenced as "#rpath/QtCore.framework". Changing it to "#application_path/../Frameworks/QtCore.framework" using the install_name_tool fixed the issue in my app.
Figured out the problem after lot of tries.
In my case:
The Pop Message - damaged application came due to libraries were missing.
I Had created .app file using QT.
To generate dmg i was using deploymacqt command tool.
deploymacqt tool creates dynamic libraries inside .app, so basically if we codesign before creating dmg, this alter will manipulate code sign.
So the proper fix is.
# Create dmg using
deploymacqt <yourapp.app> -dmg
# Open resulted dmg file, copy <yourapp.app> to different folder(let's say /Documents/<yourapp.app>)
# Codesign the /Documents/<yourapp.app> using
codesign --deep --force --verify --verbose --sign "Developer ID Application: <developerid>" <yourapp.app>
# Verify using
codesign --verify --verbose=4 <yourapp.app>
* you should see something like this
<yourapp.app>: valid on disk
<yourapp.app>: satisfies its Designated Requirement
# Now create again the dmg file using dropdmg(https://c-command.com/dropdmg/) application, download, install dropdmg. set the cofiguration preferences with your developer id certificate in signing option.
# drag and drop <yourapp.app> to dropdmg app, wait for creation of dmg to complete. voila you have now successfully created dmg with proper developer id certification.
# verify resulted dmg again using
codesign --verify --verbose=4 <yourapp.dmg>
# you can also verify with gatekeeper
spctl -a -t exec -vv <yourapp.dmg>
once you are done with these, you will not see pop message saying app is damaged or broken or unidentified developer.
You need to verify all your rpath with command line otool -l of your executable and yours Frameworks. If you have a local rpath (ex: /user/name/Qt/) in your executable delete it (with this command install_name_tool -delete_rpath).
I paid the $99 to get a developer license w/ Apple. Installed Xcode 4.3. Went to the Organizer and "Provisioning Profiles" and refreshed to download my code signing certificate. Checked my Keychain Access and confirmed that I have "3rd Party Mac Developer ", "Developer ID" and "Mac Developer *" certificates.
At this point the documentation from apple mentioned pulling up your project files. I'm using Wineskin to package my Windows application, so I don't have an Xcode project. I have a .app file produced my Wineskin. I'd like to codesign the .app file that Wineskin produced for me.
I tried:
codesign -s "certificate name" /path/to/my.app
I tried all the possible certificate names that had my name and the word "Application" in them from my Keychain Access.
Every time I get the error "/path/to/my.app: object file format unrecognized, invalid, or unsuitable"
Any idea on how to get past this error? Am I even attempting the proper command? Or is there a different way I should go?
To summarize the comments to my questions, here are the commands I run to sign my .app file for Gatekeeper:
export CODESIGN_ALLOCATE="/Applications/Xcode.app/Contents/Developer/usr/bin/codesign_allocate"
codesign --force --sign "Developer ID Application: <my name>" /path/to/my.app
Thanks, Gordon Davisson and JWWalker!
(edit) If this fails, I realize that installing the "Command Line Tools" from within XCode was needed.
EDIT:
To verify
$ codesign -dv --verbose=4 my.app
In Apple ID account make sure you have few types of certificate?
Make sure you have a valid developer certificate and a private key in your keychain.
If you have some problems with it, the certificate should be revoked via developer.apple.com and generated from the scratch (XCode > Accounts > Manage Certificates).
Then you can use codesign:
codesign --force --deep --sign "Apple Development: FirstName LastName (XXXXXXXXXX)" /Applications/ApplicationName.app
Before using codesign command
Install Command line tool for Xcode from https://developer.apple.com/downloads/index.action section.
(You should have a developer account to download Additional Tools.)
Please check for any hidden file in Payload folder like (.DStore) and if there is one please remove it
Navigate to Payload folder via terminal using cd command
Type ls- a command on terminal
if there is any hidden file apart, delete it by rm -f .DStore
This solution worked for me so please give a try....
I have downloaded and installed the WWDR certificate. I have tried setting it to Always Trust and system defaults.
When I try to archive my app I get the CSSMERR_TP_NOT_TRUSTED error.
If I try signing manually I get the same:
/usr/bin/codesign --force --sign "3rd Party Mac Developer Application:
XX XXX-XXX"
/Users/XXX/Library/Developer/Xcode/DerivedData/XXX-fivqootinaolitdbpxccqykoaoqs/ArchiveIntermediates/XXX/InstallationBuildProductsLocation/Users/XXX/Applications/XXX.app
/Users/xxx/Library/Developer/Xcode/DerivedData/xxx-fivqootinaolitdbpxccqykoaoqs/ArchiveIntermediates/xxx/InstallationBuildProductsLocation/Users/xxx/Applications/xxx.app:
replacing invalid existing signature
/Users/xxx/Library/Developer/Xcode/DerivedData/xxx-fivqootinaolitdbpxccqykoaoqs/ArchiveIntermediates/xxx/InstallationBuildProductsLocation/Users/xxx/Applications/xxx.app:
CSSMERR_TP_NOT_TRUSTED
BUT
If I use
sudo /usr/bin/codesign --force --sign
Then it works....
The key is installed in keychain access in the 'login' chain.
Obishawn used one of the suggestions provided by Apple in the following steps published to troubleshoot this error - How do I resolve the CodeSign error: CSSMERR_TP_NOT_TRUSTED?
.
For others experiencing this build error -
CSSMERR_TP_NOT_TRUSTED
the above guide covers a more broad range of potential causes. The error can also occur at Xcode Archive > Share, Validate, or Submit time, and the above steps to resolve it are the same.
Ok, I finally figured mine out. I had the WWDR certificate in my login keychain and my System keychain. I deleted both and reimported a fresh one from Apple and everything works now. I can codesign without using sudo and MonoDevelop can fully compile for distribution and upload to my devices.
My two cents on that problem :
I had to fight with it for some hours. Here are what I had to fix to have codesign do its job :
Ensure that certificates are not duplicated between the login and the system keychain
Ensure no old / expired / revoked versions of the certificates exist in any keychain
Ensure all certificates have "system default" trust policy. If one is set to "always trust", then codesign will fail.
This last point was found on a machine that was migrated to Xcode 8.2 recently. It might be a new behavior of Xcode 8.