I have a command-line Ruby application that uses Curses to create a GUI. This GUI is absolutely mangled by Windows' command prompt if the command prompt window is too small.
The command prompt window can be resized in properties. However, I want to resize it programatically.
Running this command in the command prompt (nothing to do with Ruby) will resize the command prompt window to desired variables.
mode con:cols=120 lines=40
Can I do this purely in Ruby?
Or, failing that (I suspect doing it purely in Ruby may be impossible) can my ruby application actually run that command and 'hit enter', and resize window it's running in?
Ruby has several ways to 'shell out', and there is an in-depth post here on SO about it:
Calling shell commands from Ruby
Related
I would like to know how to use Windows Terminal on PhpStorm?
I went to "Settings> Terminal", and tried to change the terminal path to :
C:\Users\user\AppData\Local\Microsoft\WindowsApps\Microsoft.WindowsTerminal_8wekyb3d8bbwe\wt.exe
But no effects
I don't think it's possible: Windows Terminal is not a shell, it's a terminal emulator that has its own window/UI. It is just another front end to the existing shells that runs a shell (powershell, cmd, wsl) under the hood. PhpStorm provides its own terminal emulator in Terminal tool window. It's impossible to integrate one terminal emulator inside another, because all integration is based on parsing ANSI/VT sequences from underlying shell.
I run calculations on Windows for hours and would like to have the calculation report/log inside the interactive IDLE/shell window be saved to a file at the end by a command.
Would be nice to exit() and close the window too.
As much as I like Linux, this is an Unattended Windows machine, hence, some modules/commands are not available, sadly, and the ability to install other software is limited.
The fact that the developers did not think of a command to save the transactions within the IDLE/shell is surprising.
I know in some environments you can direct the output of a job, like a report to another text file by using the key -o, --o, --output, > to a text file. Surprisingly Python does not support anything like that!
Any help would be appreciated
Thanks
Windows Command Prompt supports stdout redirection and probably stderr redirection. I just tested python -c "print(test)" > F:/dev/tem/out.txt and the print out went to out.txt. Replace -c "print('test') with script.py and the same should happen. Piping stdout of one program to stdin of another might work. You might be able to chain programs with a .bat file. PowerShell likely is more powerful and flexible, but I have never used it.
I am not completely clear on what you are asking, but I hope the following answers your questions.
Python runs in 2 modes: batch and interactive. Interactive mode is intended for ephermeral interaction with a human. Batch mode is for unattended computation, with occasional screen messages, but with most results sent to a file other than the screen. Both modes are combined when you run python -i xyz.py. The file is first run in batch mode, and then Python shifts to interactive mode.
It sounds like you should be using batch mode rather than either Python's or IDLE's interactive mode. If your code runs from IDLE, you should be able to run it directly with the same python.exe that you used to run IDLE. There are exceptions, of course, if one makes one's code dependent on running within IDLE, but this is unlikely to be an accident or to be needed for unattended running.
The IDLE Shell simulates interactive Python. When a file is run from an editor window, IDLE simulates python -i file-being-edited.py, with screen output going to Shell. In either case, an interactive user can save the contents of Shell with the File => Save As menu command. So there is such a command. There are also close window and exit commands and shortcuts.
In IDLE's intended use, as an interactive python learning and program development environment, there is no need from for a program to issue these commands. To save data in a file, a program can open a file and write data directly.
Try to see if you can install Jupyter Notebook (not separate software, but just a python module)
pip install jupyter
Jupyter notebook is highly helpful for saving and sharing your code. It can be used as both a shell and as a script editor.
I can open a single file with Emacs, no problem. But I'm used to Emacs on Linux, where typing emacs test.cpp & would open a new Emacs frame, leaving the terminal free. On OS X, however, when I try to open a new frame with emacs test.cpp &, the terminal shows a process was created but the window fails to pop up. If I push Ctrl+C, the terminal shows "Stopped", but I see the process is still running because I can see it in the task monitor.
How to solve this problem? Thanks!
The issue here is that the command emacs on Linux is generally just the Emacs binary itself, which opens a new frame (that's Emacs-speak for X11 or other GUI window) unless you specify -nw on the command line; in contrast, the emacs command provided by Homebrew is a shell script that calls /usr/local/Cellar/emacs/24.3/Emacs.app/Contents/MacOS/Emacs -nw "$#" (substituting the version installed for 24.3). So the Homebrew version launches as a terminal app.
You can make a shell script that just runs /usr/local/Cellar/emacs/24.3/Emacs.app/Contents/MacOS/Emacs "$#", and it would behave somewhat as you expect, except that you would be launching a brand-new instance of the Mac app, which would cause an additional Emacs icon to appear on the Dock. Such a thing isn't considered "Mac-like," but it's not the end of the world.
An alternate solution, which is used a lot across different operating systems, is to make one Emacs process a server and then use emacsclient to open files from the command line. Emacsclient can open files in the current terminal, a new frame (GUI window), or an existing instance of Emacs. For an instance of Emacs to run as a server just requires that you run M-x server-start within it, or put (server-start) inside your init file (~/.emacs or ~/.emacs.d/init.el).
My Emacs config has this snippet, which starts server mode automatically when I launch the GUI app:
(when (display-graphic-p)
(server-start))
Then, once Emacs is running (you can make it autostart upon login in System Preferences > Users & Groups > Login Items), type emacsclient -nw test.cpp to open the file in the terminal, or emacsclient test.cpp & to open it in an existing frame, or emacsclient -c test.cpp & to open a new frame. (Note that if you open it in an existing frame, you use C-x # to close the buffer without closing the frame, as opposed to C-x C-c.)
Note that the terminal emacsclient command I gave just now didn't use & but the GUI ones did. & at the end of a command line puts the process in the background, meaning it's not monopolizing your terminal. For whatever reason (probably because it wouldn't be sensible to have a full-screen terminal app running in the background), when you invoke the terminal version of Emacs with &, it just suspends itself. The same thing would happen if you pressed C-z within Emacs. To get it back into the foreground, type fg (actually you can have multiple background processes, in which case fg would just pick the most recent one unless you specified a job specifier; see bash's man page (man bash) and search for JOB CONTROL if you're interested in the details).
I want to be able to open an application on the command line, but instead of switching to the application, I want to stay on my terminal emulator. Is there a way of accomplishing this? I am using OS X.
Use the -g flag of open, which avoids bringing the app to the foreground.
$ open -g /Applications/TextEdit.app
$
open will start the app, and then return to the command prompt.
After you run the program hit ctrl+z and type bg. You will return to your terminal CLI.
Whenever you want to go back to your program, just type fg.
You can background the job. In the Bash shell, this is done with the &. For example:
some_script_or_application &
Note that some daemons and processes background themselves. For example, on OS X, running open some.pdf will preview the PDF in a GUI while returning the command prompt immediately without needing to do anything special.
See the GNU Bash Manual for more on job control for background jobs.
Is there a way to suppress showing the command window when running a console application on Windows XP?
Details: I am calling a (console-based) program from Vim. I would like to avoid the command window being shown every time I do this.
Try start /B <program name> to start the program without a new window.
Did you try shell.vim?
The xolox#shell#execute() function
This function enables other Vim
plug-ins to execute external commands
in the background (i.e.
asynchronously) without opening a
command prompt window on Windows.
i can't believe no one has suggested simply using :silent
for example, I have the following in my .vimrc (gvim on Win7)
"open windows explorer to the directory of the current file
:map <leader>ex :silent !Explorer %:p:h<CR>
When I didn’t want to see the output of external commands called from the Vim command line, I would prepend them with :silent. However, this results in a command window momentarily flashing on screen when running GVim under MS Windows. After a short while, I got annoyed by this behaviour so I researched alternative solutions (which is how I came across this question).
The best solution I came up with was to use Vim’s inbuilt system function which runs shell commands without opening an external command window. While the output of the shell command is not printed, its exit status is conveniently available via v:shell_error. It also has the advantage that it’s portable across (all) platforms.
Example (the echo statement should print 0 if C:\Windows exists):
call system("dir c:\windows")
echo v:shell_error
You could maybe use some autohotkey script of this kind:
Loop {
WinWait, my command window title
WinHide
}
I was trying to use git-bash as my shell from vim on Windows but having the command prompt open whenever a command was run, as you described. My eventual solution was to install the plugin xolox/vim-shell and add the following snippet to .vimrc:
if has('win32')
set shell=bash\ -c
set shellcmdflag=
set shellxquote='
set shellquote=
set shellredir=>
set noshelltemp "This prevents an external window from opening.
endif
This utility will also do the job:
http://www.ntwind.com/software/utilities/hstart.html