Related
I want to execute a long running command in Bash, and both capture its exit status, and tee its output.
So I do this:
command | tee out.txt
ST=$?
The problem is that the variable ST captures the exit status of tee and not of command. How can I solve this?
Note that command is long running and redirecting the output to a file to view it later is not a good solution for me.
There is an internal Bash variable called $PIPESTATUS; it’s an array that holds the exit status of each command in your last foreground pipeline of commands.
<command> | tee out.txt ; test ${PIPESTATUS[0]} -eq 0
Or another alternative which also works with other shells (like zsh) would be to enable pipefail:
set -o pipefail
...
The first option does not work with zsh due to a little bit different syntax.
Dumb solution: Connecting them through a named pipe (mkfifo). Then the command can be run second.
mkfifo pipe
tee out.txt < pipe &
command > pipe
echo $?
using bash's set -o pipefail is helpful
pipefail: the return value of a pipeline is the status of
the last command to exit with a non-zero status,
or zero if no command exited with a non-zero status
There's an array that gives you the exit status of each command in a pipe.
$ cat x| sed 's///'
cat: x: No such file or directory
$ echo $?
0
$ cat x| sed 's///'
cat: x: No such file or directory
$ echo ${PIPESTATUS[*]}
1 0
$ touch x
$ cat x| sed 's'
sed: 1: "s": substitute pattern can not be delimited by newline or backslash
$ echo ${PIPESTATUS[*]}
0 1
This solution works without using bash specific features or temporary files. Bonus: in the end the exit status is actually an exit status and not some string in a file.
Situation:
someprog | filter
you want the exit status from someprog and the output from filter.
Here is my solution:
((((someprog; echo $? >&3) | filter >&4) 3>&1) | (read xs; exit $xs)) 4>&1
echo $?
See my answer for the same question on unix.stackexchange.com for a detailed explanation and an alternative without subshells and some caveats.
By combining PIPESTATUS[0] and the result of executing the exit command in a subshell, you can directly access the return value of your initial command:
command | tee ; ( exit ${PIPESTATUS[0]} )
Here's an example:
# the "false" shell built-in command returns 1
false | tee ; ( exit ${PIPESTATUS[0]} )
echo "return value: $?"
will give you:
return value: 1
So I wanted to contribute an answer like lesmana's, but I think mine is perhaps a little simpler and slightly more advantageous pure-Bourne-shell solution:
# You want to pipe command1 through command2:
exec 4>&1
exitstatus=`{ { command1; printf $? 1>&3; } | command2 1>&4; } 3>&1`
# $exitstatus now has command1's exit status.
I think this is best explained from the inside out - command1 will execute and print its regular output on stdout (file descriptor 1), then once it's done, printf will execute and print icommand1's exit code on its stdout, but that stdout is redirected to file descriptor 3.
While command1 is running, its stdout is being piped to command2 (printf's output never makes it to command2 because we send it to file descriptor 3 instead of 1, which is what the pipe reads). Then we redirect command2's output to file descriptor 4, so that it also stays out of file descriptor 1 - because we want file descriptor 1 free for a little bit later, because we will bring the printf output on file descriptor 3 back down into file descriptor 1 - because that's what the command substitution (the backticks), will capture and that's what will get placed into the variable.
The final bit of magic is that first exec 4>&1 we did as a separate command - it opens file descriptor 4 as a copy of the external shell's stdout. Command substitution will capture whatever is written on standard out from the perspective of the commands inside it - but since command2's output is going to file descriptor 4 as far as the command substitution is concerned, the command substitution doesn't capture it - however once it gets "out" of the command substitution it is effectively still going to the script's overall file descriptor 1.
(The exec 4>&1 has to be a separate command because many common shells don't like it when you try to write to a file descriptor inside a command substitution, that is opened in the "external" command that is using the substitution. So this is the simplest portable way to do it.)
You can look at it in a less technical and more playful way, as if the outputs of the commands are leapfrogging each other: command1 pipes to command2, then the printf's output jumps over command 2 so that command2 doesn't catch it, and then command 2's output jumps over and out of the command substitution just as printf lands just in time to get captured by the substitution so that it ends up in the variable, and command2's output goes on its merry way being written to the standard output, just as in a normal pipe.
Also, as I understand it, $? will still contain the return code of the second command in the pipe, because variable assignments, command substitutions, and compound commands are all effectively transparent to the return code of the command inside them, so the return status of command2 should get propagated out - this, and not having to define an additional function, is why I think this might be a somewhat better solution than the one proposed by lesmana.
Per the caveats lesmana mentions, it's possible that command1 will at some point end up using file descriptors 3 or 4, so to be more robust, you would do:
exec 4>&1
exitstatus=`{ { command1 3>&-; printf $? 1>&3; } 4>&- | command2 1>&4; } 3>&1`
exec 4>&-
Note that I use compound commands in my example, but subshells (using ( ) instead of { } will also work, though may perhaps be less efficient.)
Commands inherit file descriptors from the process that launches them, so the entire second line will inherit file descriptor four, and the compound command followed by 3>&1 will inherit the file descriptor three. So the 4>&- makes sure that the inner compound command will not inherit file descriptor four, and the 3>&- will not inherit file descriptor three, so command1 gets a 'cleaner', more standard environment. You could also move the inner 4>&- next to the 3>&-, but I figure why not just limit its scope as much as possible.
I'm not sure how often things use file descriptor three and four directly - I think most of the time programs use syscalls that return not-used-at-the-moment file descriptors, but sometimes code writes to file descriptor 3 directly, I guess (I could imagine a program checking a file descriptor to see if it's open, and using it if it is, or behaving differently accordingly if it's not). So the latter is probably best to keep in mind and use for general-purpose cases.
(command | tee out.txt; exit ${PIPESTATUS[0]})
Unlike #cODAR's answer this returns the original exit code of the first command and not only 0 for success and 127 for failure. But as #Chaoran pointed out you can just call ${PIPESTATUS[0]}. It is important however that all is put into brackets.
In Ubuntu and Debian, you can apt-get install moreutils. This contains a utility called mispipe that returns the exit status of the first command in the pipe.
Outside of bash, you can do:
bash -o pipefail -c "command1 | tee output"
This is useful for example in ninja scripts where the shell is expected to be /bin/sh.
The simplest way to do this in plain bash is to use process substitution instead of a pipeline. There are several differences, but they probably don't matter very much for your use case:
When running a pipeline, bash waits until all processes complete.
Sending Ctrl-C to bash makes it kill all the processes of a pipeline, not just the main one.
The pipefail option and the PIPESTATUS variable are irrelevant to process substitution.
Possibly more
With process substitution, bash just starts the process and forgets about it, it's not even visible in jobs.
Mentioned differences aside, consumer < <(producer) and producer | consumer are essentially equivalent.
If you want to flip which one is the "main" process, you just flip the commands and the direction of the substitution to producer > >(consumer). In your case:
command > >(tee out.txt)
Example:
$ { echo "hello world"; false; } > >(tee out.txt)
hello world
$ echo $?
1
$ cat out.txt
hello world
$ echo "hello world" > >(tee out.txt)
hello world
$ echo $?
0
$ cat out.txt
hello world
As I said, there are differences from the pipe expression. The process may never stop running, unless it is sensitive to the pipe closing. In particular, it may keep writing things to your stdout, which may be confusing.
PIPESTATUS[#] must be copied to an array immediately after the pipe command returns.
Any reads of PIPESTATUS[#] will erase the contents.
Copy it to another array if you plan on checking the status of all pipe commands.
"$?" is the same value as the last element of "${PIPESTATUS[#]}",
and reading it seems to destroy "${PIPESTATUS[#]}", but I haven't absolutely verified this.
declare -a PSA
cmd1 | cmd2 | cmd3
PSA=( "${PIPESTATUS[#]}" )
This will not work if the pipe is in a sub-shell. For a solution to that problem,
see bash pipestatus in backticked command?
Base on #brian-s-wilson 's answer; this bash helper function:
pipestatus() {
local S=("${PIPESTATUS[#]}")
if test -n "$*"
then test "$*" = "${S[*]}"
else ! [[ "${S[#]}" =~ [^0\ ] ]]
fi
}
used thus:
1: get_bad_things must succeed, but it should produce no output; but we want to see output that it does produce
get_bad_things | grep '^'
pipeinfo 0 1 || return
2: all pipeline must succeed
thing | something -q | thingy
pipeinfo || return
Pure shell solution:
% rm -f error.flag; echo hello world \
| (cat || echo "First command failed: $?" >> error.flag) \
| (cat || echo "Second command failed: $?" >> error.flag) \
| (cat || echo "Third command failed: $?" >> error.flag) \
; test -s error.flag && (echo Some command failed: ; cat error.flag)
hello world
And now with the second cat replaced by false:
% rm -f error.flag; echo hello world \
| (cat || echo "First command failed: $?" >> error.flag) \
| (false || echo "Second command failed: $?" >> error.flag) \
| (cat || echo "Third command failed: $?" >> error.flag) \
; test -s error.flag && (echo Some command failed: ; cat error.flag)
Some command failed:
Second command failed: 1
First command failed: 141
Please note the first cat fails as well, because it's stdout gets closed on it. The order of the failed commands in the log is correct in this example, but don't rely on it.
This method allows for capturing stdout and stderr for the individual commands so you can then dump that as well into a log file if an error occurs, or just delete it if no error (like the output of dd).
It may sometimes be simpler and clearer to use an external command, rather than digging into the details of bash. pipeline, from the minimal process scripting language execline, exits with the return code of the second command*, just like a sh pipeline does, but unlike sh, it allows reversing the direction of the pipe, so that we can capture the return code of the producer process (the below is all on the sh command line, but with execline installed):
$ # using the full execline grammar with the execlineb parser:
$ execlineb -c 'pipeline { echo "hello world" } tee out.txt'
hello world
$ cat out.txt
hello world
$ # for these simple examples, one can forego the parser and just use "" as a separator
$ # traditional order
$ pipeline echo "hello world" "" tee out.txt
hello world
$ # "write" order (second command writes rather than reads)
$ pipeline -w tee out.txt "" echo "hello world"
hello world
$ # pipeline execs into the second command, so that's the RC we get
$ pipeline -w tee out.txt "" false; echo $?
1
$ pipeline -w tee out.txt "" true; echo $?
0
$ # output and exit status
$ pipeline -w tee out.txt "" sh -c "echo 'hello world'; exit 42"; echo "RC: $?"
hello world
RC: 42
$ cat out.txt
hello world
Using pipeline has the same differences to native bash pipelines as the bash process substitution used in answer #43972501.
* Actually pipeline doesn't exit at all unless there is an error. It executes into the second command, so it's the second command that does the returning.
Why not use stderr? Like so:
(
# Our long-running process that exits abnormally
( for i in {1..100} ; do echo ploop ; sleep 0.5 ; done ; exit 5 )
echo $? 1>&2 # We pass the exit status of our long-running process to stderr (fd 2).
) | tee ploop.out
So ploop.out receives the stdout. stderr receives the exit status of the long running process. This has the benefit of being completely POSIX-compatible.
(Well, with the exception of the range expression in the example long-running process, but that's not really relevant.)
Here's what this looks like:
...
ploop
ploop
ploop
ploop
ploop
ploop
ploop
ploop
ploop
ploop
5
Note that the return code 5 does not get output to the file ploop.out.
I will first write a sequence of commands which I want to run
echo <some_input> | <some_command> > temp.dat & pid=$!
sleep 5
kill -INT "$pid"
The above is working perfectly fine when i run it one by one from bash shell, and the contents in the temp.dat file is exactly what I want. But, when I create a bash script containing the same set of commands, I am getting nothing in the temp.dat file.
Now, I'll mention why I'm writing those commands in such a way:
<some_command> asks for an input, that's why I'm piping <some_input>
I want the output of that command in a separate file, that's why I've redirected the output.
I want to kill the command by sending SIGINT signal after some time.
I've tried running an interactive shell by writing #!/bin/bash -i in the first line of the shell script, but it's not working.
Any alternate method to achieve the same results will be appreciated.
Update: <some_command> is also invoking a python script, but I don't think that this will cause it to behave differently.
Update2: python script was the only cause of that different behavior.
One likely cause here is that your Python process may not be flushing stdout within the allowed five seconds of runtime.
export PYTHONUNBUFFERED=1
...will cause content to be promptly written, rather than waiting for process exit / file close / amount of buffered content to reach a level sufficient to justify the overhead of a flush operation.
will this work for you?
read -p "Input Data : " inputdata ; echo $inputdata > temp.data ; sleep 5; exit
obvs
#!/usr/bin/env bash
read -p "Input Data : " inputdata
echo $inputdata > temp.data
sleep 5
should work as a script
to suit :D
#!/usr/bin/env bash
read -p "Input Data : " inputdata
<code you write eg echo $inputdata> > temp.data
sleep 5
I want to execute a long running command in Bash, and both capture its exit status, and tee its output.
So I do this:
command | tee out.txt
ST=$?
The problem is that the variable ST captures the exit status of tee and not of command. How can I solve this?
Note that command is long running and redirecting the output to a file to view it later is not a good solution for me.
There is an internal Bash variable called $PIPESTATUS; it’s an array that holds the exit status of each command in your last foreground pipeline of commands.
<command> | tee out.txt ; test ${PIPESTATUS[0]} -eq 0
Or another alternative which also works with other shells (like zsh) would be to enable pipefail:
set -o pipefail
...
The first option does not work with zsh due to a little bit different syntax.
Dumb solution: Connecting them through a named pipe (mkfifo). Then the command can be run second.
mkfifo pipe
tee out.txt < pipe &
command > pipe
echo $?
using bash's set -o pipefail is helpful
pipefail: the return value of a pipeline is the status of
the last command to exit with a non-zero status,
or zero if no command exited with a non-zero status
There's an array that gives you the exit status of each command in a pipe.
$ cat x| sed 's///'
cat: x: No such file or directory
$ echo $?
0
$ cat x| sed 's///'
cat: x: No such file or directory
$ echo ${PIPESTATUS[*]}
1 0
$ touch x
$ cat x| sed 's'
sed: 1: "s": substitute pattern can not be delimited by newline or backslash
$ echo ${PIPESTATUS[*]}
0 1
This solution works without using bash specific features or temporary files. Bonus: in the end the exit status is actually an exit status and not some string in a file.
Situation:
someprog | filter
you want the exit status from someprog and the output from filter.
Here is my solution:
((((someprog; echo $? >&3) | filter >&4) 3>&1) | (read xs; exit $xs)) 4>&1
echo $?
See my answer for the same question on unix.stackexchange.com for a detailed explanation and an alternative without subshells and some caveats.
By combining PIPESTATUS[0] and the result of executing the exit command in a subshell, you can directly access the return value of your initial command:
command | tee ; ( exit ${PIPESTATUS[0]} )
Here's an example:
# the "false" shell built-in command returns 1
false | tee ; ( exit ${PIPESTATUS[0]} )
echo "return value: $?"
will give you:
return value: 1
So I wanted to contribute an answer like lesmana's, but I think mine is perhaps a little simpler and slightly more advantageous pure-Bourne-shell solution:
# You want to pipe command1 through command2:
exec 4>&1
exitstatus=`{ { command1; printf $? 1>&3; } | command2 1>&4; } 3>&1`
# $exitstatus now has command1's exit status.
I think this is best explained from the inside out - command1 will execute and print its regular output on stdout (file descriptor 1), then once it's done, printf will execute and print icommand1's exit code on its stdout, but that stdout is redirected to file descriptor 3.
While command1 is running, its stdout is being piped to command2 (printf's output never makes it to command2 because we send it to file descriptor 3 instead of 1, which is what the pipe reads). Then we redirect command2's output to file descriptor 4, so that it also stays out of file descriptor 1 - because we want file descriptor 1 free for a little bit later, because we will bring the printf output on file descriptor 3 back down into file descriptor 1 - because that's what the command substitution (the backticks), will capture and that's what will get placed into the variable.
The final bit of magic is that first exec 4>&1 we did as a separate command - it opens file descriptor 4 as a copy of the external shell's stdout. Command substitution will capture whatever is written on standard out from the perspective of the commands inside it - but since command2's output is going to file descriptor 4 as far as the command substitution is concerned, the command substitution doesn't capture it - however once it gets "out" of the command substitution it is effectively still going to the script's overall file descriptor 1.
(The exec 4>&1 has to be a separate command because many common shells don't like it when you try to write to a file descriptor inside a command substitution, that is opened in the "external" command that is using the substitution. So this is the simplest portable way to do it.)
You can look at it in a less technical and more playful way, as if the outputs of the commands are leapfrogging each other: command1 pipes to command2, then the printf's output jumps over command 2 so that command2 doesn't catch it, and then command 2's output jumps over and out of the command substitution just as printf lands just in time to get captured by the substitution so that it ends up in the variable, and command2's output goes on its merry way being written to the standard output, just as in a normal pipe.
Also, as I understand it, $? will still contain the return code of the second command in the pipe, because variable assignments, command substitutions, and compound commands are all effectively transparent to the return code of the command inside them, so the return status of command2 should get propagated out - this, and not having to define an additional function, is why I think this might be a somewhat better solution than the one proposed by lesmana.
Per the caveats lesmana mentions, it's possible that command1 will at some point end up using file descriptors 3 or 4, so to be more robust, you would do:
exec 4>&1
exitstatus=`{ { command1 3>&-; printf $? 1>&3; } 4>&- | command2 1>&4; } 3>&1`
exec 4>&-
Note that I use compound commands in my example, but subshells (using ( ) instead of { } will also work, though may perhaps be less efficient.)
Commands inherit file descriptors from the process that launches them, so the entire second line will inherit file descriptor four, and the compound command followed by 3>&1 will inherit the file descriptor three. So the 4>&- makes sure that the inner compound command will not inherit file descriptor four, and the 3>&- will not inherit file descriptor three, so command1 gets a 'cleaner', more standard environment. You could also move the inner 4>&- next to the 3>&-, but I figure why not just limit its scope as much as possible.
I'm not sure how often things use file descriptor three and four directly - I think most of the time programs use syscalls that return not-used-at-the-moment file descriptors, but sometimes code writes to file descriptor 3 directly, I guess (I could imagine a program checking a file descriptor to see if it's open, and using it if it is, or behaving differently accordingly if it's not). So the latter is probably best to keep in mind and use for general-purpose cases.
(command | tee out.txt; exit ${PIPESTATUS[0]})
Unlike #cODAR's answer this returns the original exit code of the first command and not only 0 for success and 127 for failure. But as #Chaoran pointed out you can just call ${PIPESTATUS[0]}. It is important however that all is put into brackets.
In Ubuntu and Debian, you can apt-get install moreutils. This contains a utility called mispipe that returns the exit status of the first command in the pipe.
Outside of bash, you can do:
bash -o pipefail -c "command1 | tee output"
This is useful for example in ninja scripts where the shell is expected to be /bin/sh.
The simplest way to do this in plain bash is to use process substitution instead of a pipeline. There are several differences, but they probably don't matter very much for your use case:
When running a pipeline, bash waits until all processes complete.
Sending Ctrl-C to bash makes it kill all the processes of a pipeline, not just the main one.
The pipefail option and the PIPESTATUS variable are irrelevant to process substitution.
Possibly more
With process substitution, bash just starts the process and forgets about it, it's not even visible in jobs.
Mentioned differences aside, consumer < <(producer) and producer | consumer are essentially equivalent.
If you want to flip which one is the "main" process, you just flip the commands and the direction of the substitution to producer > >(consumer). In your case:
command > >(tee out.txt)
Example:
$ { echo "hello world"; false; } > >(tee out.txt)
hello world
$ echo $?
1
$ cat out.txt
hello world
$ echo "hello world" > >(tee out.txt)
hello world
$ echo $?
0
$ cat out.txt
hello world
As I said, there are differences from the pipe expression. The process may never stop running, unless it is sensitive to the pipe closing. In particular, it may keep writing things to your stdout, which may be confusing.
PIPESTATUS[#] must be copied to an array immediately after the pipe command returns.
Any reads of PIPESTATUS[#] will erase the contents.
Copy it to another array if you plan on checking the status of all pipe commands.
"$?" is the same value as the last element of "${PIPESTATUS[#]}",
and reading it seems to destroy "${PIPESTATUS[#]}", but I haven't absolutely verified this.
declare -a PSA
cmd1 | cmd2 | cmd3
PSA=( "${PIPESTATUS[#]}" )
This will not work if the pipe is in a sub-shell. For a solution to that problem,
see bash pipestatus in backticked command?
Base on #brian-s-wilson 's answer; this bash helper function:
pipestatus() {
local S=("${PIPESTATUS[#]}")
if test -n "$*"
then test "$*" = "${S[*]}"
else ! [[ "${S[#]}" =~ [^0\ ] ]]
fi
}
used thus:
1: get_bad_things must succeed, but it should produce no output; but we want to see output that it does produce
get_bad_things | grep '^'
pipeinfo 0 1 || return
2: all pipeline must succeed
thing | something -q | thingy
pipeinfo || return
Pure shell solution:
% rm -f error.flag; echo hello world \
| (cat || echo "First command failed: $?" >> error.flag) \
| (cat || echo "Second command failed: $?" >> error.flag) \
| (cat || echo "Third command failed: $?" >> error.flag) \
; test -s error.flag && (echo Some command failed: ; cat error.flag)
hello world
And now with the second cat replaced by false:
% rm -f error.flag; echo hello world \
| (cat || echo "First command failed: $?" >> error.flag) \
| (false || echo "Second command failed: $?" >> error.flag) \
| (cat || echo "Third command failed: $?" >> error.flag) \
; test -s error.flag && (echo Some command failed: ; cat error.flag)
Some command failed:
Second command failed: 1
First command failed: 141
Please note the first cat fails as well, because it's stdout gets closed on it. The order of the failed commands in the log is correct in this example, but don't rely on it.
This method allows for capturing stdout and stderr for the individual commands so you can then dump that as well into a log file if an error occurs, or just delete it if no error (like the output of dd).
It may sometimes be simpler and clearer to use an external command, rather than digging into the details of bash. pipeline, from the minimal process scripting language execline, exits with the return code of the second command*, just like a sh pipeline does, but unlike sh, it allows reversing the direction of the pipe, so that we can capture the return code of the producer process (the below is all on the sh command line, but with execline installed):
$ # using the full execline grammar with the execlineb parser:
$ execlineb -c 'pipeline { echo "hello world" } tee out.txt'
hello world
$ cat out.txt
hello world
$ # for these simple examples, one can forego the parser and just use "" as a separator
$ # traditional order
$ pipeline echo "hello world" "" tee out.txt
hello world
$ # "write" order (second command writes rather than reads)
$ pipeline -w tee out.txt "" echo "hello world"
hello world
$ # pipeline execs into the second command, so that's the RC we get
$ pipeline -w tee out.txt "" false; echo $?
1
$ pipeline -w tee out.txt "" true; echo $?
0
$ # output and exit status
$ pipeline -w tee out.txt "" sh -c "echo 'hello world'; exit 42"; echo "RC: $?"
hello world
RC: 42
$ cat out.txt
hello world
Using pipeline has the same differences to native bash pipelines as the bash process substitution used in answer #43972501.
* Actually pipeline doesn't exit at all unless there is an error. It executes into the second command, so it's the second command that does the returning.
Why not use stderr? Like so:
(
# Our long-running process that exits abnormally
( for i in {1..100} ; do echo ploop ; sleep 0.5 ; done ; exit 5 )
echo $? 1>&2 # We pass the exit status of our long-running process to stderr (fd 2).
) | tee ploop.out
So ploop.out receives the stdout. stderr receives the exit status of the long running process. This has the benefit of being completely POSIX-compatible.
(Well, with the exception of the range expression in the example long-running process, but that's not really relevant.)
Here's what this looks like:
...
ploop
ploop
ploop
ploop
ploop
ploop
ploop
ploop
ploop
ploop
5
Note that the return code 5 does not get output to the file ploop.out.
EDIT: Corrected process/thread terminology
My shell script has a foreground process that reads user input and a background process that prints messages. I would like to print these messages on the line above the input prompt rather than interrupting the input. Here's a canned example:
sleep 5 && echo -e "\nINFO: Helpful Status Update!" &
echo -n "> "
read input
When I execute it and type "input" a bunch of times, I get something like this:
> input input input inp
INFO: Helpful Status Update!
ut input
But I would like to see something like this:
INFO: Helpful Status Update!
> input input input input input
The solution need not be portable (I'm using bash on linux), though I would like to avoid ncurses if possible.
EDIT: According to #Nick, previous lines are inaccessible for historical reasons. However, my situation only requires modifying the current line. Here's a proof of concept:
# Make named pipe
mkfifo pipe
# Spawn background process
while true; do
sleep 2
echo -en "\033[1K\rINFO: Helpful Status Update!\n> `cat pipe`"
done &
# Start foreground user input
echo -n "> "
pid=-1
collected=""
IFS=""
while true; do
read -n 1 c
collected="$collected$c"
# Named pipes block writes, so must do background process
echo -n "$collected" >> pipe &
# Kill last loop's (potentially) still-blocking pipe write
if kill -0 $pid &> /dev/null; then
kill $pid &> /dev/null
fi
pid=$!
done
This produces mostly the correct behavior, but lacks CLI niceties like backspace and arrow navigation. These could be hacked in, but I'm still having trouble believing that a standard approach hasn't already been developed.
The original ANSI codes still work in bash terminal on Linux (and MacOS), so you can use \033[F where \033 is the ESCape character. You can generate this in bash terminal by control-V followed by the ESCape character. You should see ^[ appear. Then type [F. If you test the following script:
echo "original line 1"
echo "^[[Fupdated line 1"
echo "line 2"
echo "line 3"
You should see output:
updated line 1
line 2
line 3
EDIT:
I forgot to add that using this in your script will cause the cursor to return to the beginning of the line, so further input will overwrite what you have typed already. You could use control-R on the keyboard to cause bash to re-type the current line and return the cursor to the end of the line.
to clarify, by reporting output, here i mean the ones start with [1]:
$ echo hello world >&2 &
[1] 11714
hello world
[1]+ Done echo hello world 1>&2
which means i want hello world to be output.
i did a lot of search on this, and the solutions i found would be:
having it run in a subshell
set +m can deal with Done message only.
suppress it explicitly: { cmd & } 2>/dev/null which won't suppress Done and it suppresses all my stderr too.
but in my condition, they don't work quite fine since i want extra parallelism. the framework should be:
cmd1 &>>log &
cmd2 &>>log &
wait
cat file &
cat file2 >&2 &
wait
if i put things into subshells, output is suppressed, but wait won't block the program.
the rest two options doesn't work as i've stated.
the worst is i am expecting something will be output to stderr. so i am looking for a way to totally suppress these reporting things or any other work around that you can come up with.
This is very ugly but it looks like it works in a quick test.
set +m
{ { sleep 2; echo stdout; echo stderr >&2; } 2>&3- & } 3>&2 2>/dev/null
Create fd 3 as a copy of fd 2 then redirect fd 2 to /dev/null (to suppress the background id/pid message).
Then, for the backgrounded command list, move fd 3 back to fd 2 so things that try to use it go where you wanted them to.
My first attempt had the fd 3 mv in the outer brace command list but that didn't suppress the id/pid message correctly (I guess that happened too quickly or something).