I have the following items (being displayed on UI)
Items | Type | Providers |
Choclate | Mint | Nestle |
Choclate | BlueBerry | Nestle |
Choclate | White | Nestle |
Choclate | Mint | LocalProvider |
Choclate | BlueBerry | LocalProvider |
Choclate | White | LocalProvider |
Starburst | mixed | SomeXProvider |
SourPatch | mixed | SomeYProvider |
Toffee | Carmel | LocalProvider |
Toffee | Salted Carmel | NewProvider |
Toffee | Vanilla | Eclairs |
I am trying to get Items that have multiple Providers but not the others ones. How can I structure my LINQ query to get the result. I have been looking online for a while but have not found anything.
eg, Choclate has multiple providers. I want to get a list that has only Chocalte so that I can filter it the way I want.
I want to remove Local Provider from the list as I have Nestle as the provider.
My end result is should look like
Items | Type | Providers |
Choclate | Mint | Nestle |
Choclate | BlueBerry | Nestle |
Choclate | White | Nestle |
Starburst | mixed | SomeXProvider |
SourPatch | mixed | SomeYProvider |
Toffee | Salted Carmel | NewProvider |
Toffee | Vanilla | Eclairs |
A user helped me a little bit but the result was not as expected. Updated Query
responses.GroupBy(x => x.Items).Where(g => g.Select(y => y.Providers != "LocalProvider").Distinct().Count() > 1).Select(b => b.First());
I've done it in three smaller steps to make it clear what is happening. You could combine this into one big statement, but that might make it less clear.
// Gather all the Local products
var localProducts = products.Where(x => x.Providers == "LocalProvider");
// Find Local products that have a non-local counterpart
var localProductsToRemove = localProducts.Where(
x => products.Any(
y => y.Items == x.Items && y.Type == x.Type && y.Providers != x.Providers
)
);
// Take all products except the ones that we want to remove
var result = products.Except(localProductsToRemove);
Runnable .NET Fiddle: https://dotnetfiddle.net/RePXLY
var secondList = responses.Where(x => x.Providers != "LocalProvider").GroupBy(x => x.Items).ToList();
Cast your results into another variable. That variable will then contain the filtered results.
Related
some UI list like this have some button or check box in treeview
| | GroupBox - '' (L807, T366, R1257, B746)
| | ['GroupBox']
| |
| | TreeView - '' (L815, T382, R1249, B732)
| | ['TreeView']
| | child_window(auto_id="1176", control_type="Tree")
| | |
| | | CheckBox - 'Intrusion Prevention' (L839, T384, R957, B402)
| | | ['CheckBox', 'Intrusion PreventionCheckBox', 'Intrusion Prevention', 'CheckBox0', 'CheckBox1']
| | | child_window(title="Intrusion Prevention", control_type="CheckBox")
| | |
| | | CheckBox - 'USB Malware Protection' (L874, T402, R1010, B420)
| | | ['USB Malware ProtectionCheckBox', 'CheckBox2', 'USB Malware Protection']
| | | child_window(title="USB Malware Protection", control_type="CheckBox")
| | |
| | | TreeItem - 'Network Virus Protection' (L858, T420, R996, B438)
| | | ['Network Virus Protection', 'Network Virus ProtectionTreeItem', 'TreeItem', 'TreeItem0', 'TreeItem1']
| | | child_window(title="Network Virus Protection", control_type="TreeItem")
I can use TreeView to see Treeitems like this
dlg = app.top_window()
a = dlg.TreeView
b = a.print_items()
i can see b have tree item (ex:Network Virus Protection) but no checkbox (ex:Intrusion Prevention) so how can i get checkbox ele from treeview?
i know can use child_window("title") to get check box , but i need get this ele and check it text, so use title are not better
you can try this extension,
https://marketplace.visualstudio.com/items?itemName=ClickCorp.clicknium
it includes one automation library, and can recorde the checkbox and do check or uncheck operation：
ui(locator.notepad.checkbox).check()
My file looks as follows:
+------------------------------------------+---------------+----------------+------------------+------------------+-----------------+
| Message | Status | Adress | Changes | Test | Calibration |
|------------------------------------------+---------------+----------------+------------------+------------------+-----------------|
| Hello World | Active | up | 1 | up | done |
| Hello Everyone Here | Passive | up | 2 | down | none |
| Hi there. My name is Eric. How are you? | Down | up | 3 | inactive | done |
+------------------------------------------+---------------+----------------+------------------+------------------+-----------------+
+----------------------------+---------------+----------------+------------------+------------------+-----------------+
| Message | Status | Adress | Changes | Test | Calibration |
|----------------------------+---------------+----------------+------------------+------------------+-----------------|
| What's up? | Active | up | 1 | up | done |
| Hi. I'm Otilia | Passive | up | 2 | down | none |
| Hi there. This is Marcus | Up | up | 3 | inactive | done |
+----------------------------+---------------+----------------+------------------+------------------+-----------------+
I want to extract a specific column using AWK.
I can use CUT to do it; however when the length of each table varies depending on how many characters are present in each column, I'm not getting the desired output.
cat File.txt | cut -c -44
+------------------------------------------+
| Message |
|------------------------------------------+
| Hello World |
| Hello Everyone Here |
| Hi there. My name is Eric. How are you? |
+------------------------------------------+
+----------------------------+--------------
| Message | Status
|----------------------------+--------------
| What's up? | Active
| Hi. I'm Otilia | Passive
| Hi there. This is Marcus | Up
+----------------------------+--------------
or
cat File.txt | cut -c 44-60
+---------------+
| Status |
+---------------+
| Active |
| Passive |
| Down |
+---------------+
--+--------------
| Adress
--+--------------
| up
| up
| up
--+--------------
I tried using AWK but I don't know how to add 2 different delimiters which would take care of all the lines.
cat File.txt | awk 'BEGIN {FS="|";}{print $2,$3}'
Message Status
------------------------------------------+---------------+----------------+------------------+------------------+-----------------
Hello World Active
Hello Everyone Here Passive
Hi there. My name is Eric. How are you? Down
Message Status
----------------------------+---------------+----------------+------------------+------------------+-----------------
What's up? Active
Hi. I'm Otilia Passive
Hi there. This is Marcus Up
The output I'm looking for:
+------------------------------------------+
| Message |
|------------------------------------------+
| Hello World |
| Hello Everyone Here |
| Hi there. My name is Eric. How are you? |
+------------------------------------------+
+----------------------------+
| Message |
|----------------------------+
| What's up? |
| Hi. I'm Otilia |
| Hi there. This is Marcus |
+----------------------------+
or
+------------------------------------------+---------------+
| Message | Status |
|------------------------------------------+---------------+
| Hello World | Active |
| Hello Everyone Here | Passive |
| Hi there. My name is Eric. How are you? | Down |
+------------------------------------------+---------------+
+----------------------------+---------------+
| Message | Status |
|----------------------------+---------------+
| What's up? | Active |
| Hi. I'm Otilia | Passive |
| Hi there. This is Marcus | Up |
+----------------------------+---------------+
or random other columns
+------------------------------------------+----------------+------------------+
| Message | Adress | Test |
|------------------------------------------+----------------+------------------+
| Hello World | up | up |
| Hello Everyone Here | up | down |
| Hi there. My name is Eric. How are you? | up | inactive |
+------------------------------------------+----------------+------------------+
+----------------------------+---------------+------------------+
| Message |Adress | Test |
|----------------------------+---------------+------------------+
| What's up? |up | up |
| Hi. I'm Otilia |up | down |
| Hi there. This is Marcus |up | inactive |
+----------------------------+---------------+------------------+
Thanks in advance.
One idea using GNU awk:
awk -v fldlist="2,3" '
BEGIN { fldcnt=split(fldlist,fields,",") } # split fldlist into array fields[]
{ split($0,arr,/[|+]/,seps) # split current line on dual delimiters "|" and "+"
for (i=1;i<=fldcnt;i++) # loop through our array of fields (fldlist)
printf "%s%s", seps[fields[i]-1], arr[fields[i]] # print leading separator/delimiter and field
printf "%s\n", seps[fields[fldcnt]] # print trailing separator/delimiter and terminate line
}
' File.txt
NOTES:
requires GNU awk for the 4th argument to the split() function (seps == array of separators; see gawk string functions for details)
assumes our field delimiters (|, +) do not show up as part of the data
the input variable fldlist is a comma-delimited list of columns that mimics what would be passed to cut (eg, when a line starts with a delimiter then field #1 is blank)
For fldlist="2,3" this generates:
+------------------------------------------+---------------+
| Message | Status |
|------------------------------------------+---------------+
| Hello World | Active |
| Hello Everyone Here | Passive |
| Hi there. My name is Eric. How are you? | Down |
+------------------------------------------+---------------+
+----------------------------+---------------+
| Message | Status |
|----------------------------+---------------+
| What's up? | Active |
| Hi. I'm Otilia | Passive |
| Hi there. This is Marcus | Up |
+----------------------------+---------------+
For fldlist="2,4,6" this generates:
+------------------------------------------+----------------+------------------+
| Message | Adress | Test |
|------------------------------------------+----------------+------------------+
| Hello World | up | up |
| Hello Everyone Here | up | down |
| Hi there. My name is Eric. How are you? | up | inactive |
+------------------------------------------+----------------+------------------+
+----------------------------+----------------+------------------+
| Message | Adress | Test |
|----------------------------+----------------+------------------+
| What's up? | up | up |
| Hi. I'm Otilia | up | down |
| Hi there. This is Marcus | up | inactive |
+----------------------------+----------------+------------------+
For fldlist="4,3,2" this generates:
+----------------+---------------+------------------------------------------+
| Adress | Status | Message |
+----------------+---------------|------------------------------------------+
| up | Active | Hello World |
| up | Passive | Hello Everyone Here |
| up | Down | Hi there. My name is Eric. How are you? |
+----------------+---------------+------------------------------------------+
+----------------+---------------+----------------------------+
| Adress | Status | Message |
+----------------+---------------|----------------------------+
| up | Active | What's up? |
| up | Passive | Hi. I'm Otilia |
| up | Up | Hi there. This is Marcus |
+----------------+---------------+----------------------------+
Say that again? (fldlist="3,3,3"):
+---------------+---------------+---------------+
| Status | Status | Status |
+---------------+---------------+---------------+
| Active | Active | Active |
| Passive | Passive | Passive |
| Down | Down | Down |
+---------------+---------------+---------------+
+---------------+---------------+---------------+
| Status | Status | Status |
+---------------+---------------+---------------+
| Active | Active | Active |
| Passive | Passive | Passive |
| Up | Up | Up |
+---------------+---------------+---------------+
And if you make the mistake of trying to print the '1st' column, ie, fldlist="1":
+
|
|
|
|
|
+
+
|
|
|
|
|
+
If GNU awk is available, please try markp-fuso's nice solution.
If not, here is a posix-compliant alternative:
#!/bin/bash
# define bash variables
cols=(2 3 6) # bash array of desired columns
col_list=$(IFS=,; echo "${cols[*]}") # create a csv string
awk -v cols="$col_list" '
NR==FNR {
if (match($0, /^[|+]/)) { # the record contains a table
if (match($0, /^[|+]-/)) # horizontally ruled line
n = split($0, a, /[|+]/) # split into columns
else # "cell" line
n = split($0, a, /\|/)
len = 0
for (i = 1; i < n; i++) {
len += length(a[i]) + 1 # accumulated column position
pos[FNR, i] = len
}
}
next
}
{
n = split(cols, a, /,/) # split the variable `cols` on comma into an array
for (i = 1; i <= n; i++) {
col = a[i]
if (pos[FNR, col] && pos[FNR, col+1]) {
printf("%s", substr($0, pos[FNR, col], pos[FNR, col + 1] - pos[FNR, col]))
}
}
print(substr($0, pos[FNR, col + 1], 1))
}
' file.txt file.txt
Result with cols=(2 3 6) as shown above:
+---------------+----------------+-----------------+
| Status | Adress | Calibration |
+---------------+----------------+-----------------|
| Active | up | done |
| Passive | up | none |
| Down | up | done |
+---------------+----------------+-----------------+
+---------------+----------------+-----------------+
| Status | Adress | Calibration |
+---------------+----------------+-----------------|
| Active | up | done |
| Passive | up | none |
| Up | up | done |
+---------------+----------------+-----------------+
It detects the column width in the 1st pass then splits the line on the column position in the 2nd pass.
You can control the columns to print with the bash array cols which is assigned at the beginning of the script. Please assign the array to the list of desired column numbers in increasing order. If you want to use the bash variable in different way, please let me know.
I have a list of users, and I'm trying to get the result of each unique domain in users' email addresses and their totals.
So, let's say I have these 5 users:
+--------------------------------------+--------------------------------+-------------+------------+-------------+
| id | email | firstname | lastname | something |
+--------------------------------------+--------------------------------+-------------+------------+-------------+
| 00c0f0db-87d0-45b2-8ed2-aa94d1e3e659 | shane.conte#jourrapide.com | Shane | Conte | iew9anap0L |
+--------------------------------------+--------------------------------+-------------+------------+-------------+
| 0114360a-3ef8-49d6-8c51-02392bc51e10 | michelle.guitierrez#dayrep.com | Michelle | Guitierrez | eeNgiev3foh |
+--------------------------------------+--------------------------------+-------------+------------+-------------+
| 00e8e2f2-2130-4f65-8914-b93d5b029d75 | terri.hebert#rhyta.com | Terri | Hebert | vahMoKiuCh0 |
+--------------------------------------+--------------------------------+-------------+------------+-------------+
| 00e1578b-cf6d-46b8-92e3-2388a80105f7 | richard.copeland#dayrep.com | Richard | Copeland | Iem4mohng |
+--------------------------------------+--------------------------------+-------------+------------+-------------+
| 00f1be34-d60e-4b2f-b3ae-610c67151f2d | elsie.fuhrman#rhyta.com | Elsie | Fuhrman | aPie6piD6ae |
+--------------------------------------+--------------------------------+-------------+------------+-------------+
After running the query, I'd like to see this result:
+-------+----------------+
| count | domain |
+-------+----------------+
| 1 | jourrapide.com |
+-------+----------------+
| 2 | dayrep.com |
+-------+----------------+
| 2 | rhyta.com |
+-------+----------------+
I'm currently running this query below to get the unique domains but if I try to run count() in it, it dramatically fails after 300 seconds, which I expect to happen since I have A LOT more than 5 users :)
r.db('helloworld').table('users').pluck('email').map(function(user) {
return user('email').split('#').nth(1).downcase()
}).distinct().map(function(domain) {
return {
count: '???', // <--- this is where I need help
domain: domain
}
})
And as you can imagine, it perfectly returns this result:
+-------+----------------+
| count | domain |
+-------+----------------+
| ??? | jourrapide.com |
+-------+----------------+
| ??? | dayrep.com |
+-------+----------------+
| ??? | rhyta.com |
+-------+----------------+
I hope this makes sense. If you think I'm on a wrong path, feel free to suggest any other way.
Thanks in advance!
You can't distinct() to count(). Instead you want to group():
r.db('helloworld').table('users').pluck('email').map(function(user) {
// wrap the result in an object for grouping purposes
return { domain: user('email').split('#').nth(1).downcase() };
})
// this groups all domains together in a [{ group, reduction }] list of objects
.group('domain')
// after group(), calls are scoped to each reduction: count each one
.count()
// let's ungroup to scope the following calls to the whole sequence
.ungroup()
// let's be compliant with the format you expect
.map(function(doc) {
return {
domain: doc('group'),
count: doc('reduction')
};
});
I have a Google Sheet that contains names of characters, together with corresponding values for the group name, "selected" and attack power. It looks like this:
Sheet1
| NAME | GROUP NAME | SELECTED | ATTACK POWER |
|:---------|:-----------|----------:|-------------:|
| guile | Team Red | 1 | 333 |
|----------|------------|-----------|--------------|
| blanka | Team Red | 1 | 50 |
|----------|------------|-----------|--------------|
| sagat | Team Red | | 500 |
|----------|------------|-----------|--------------|
| ruy | Team Blue | 1 | 450 |
|----------|------------|-----------|--------------|
| vega | Team Blue | 2 | 150 |
Sheet2
In my second sheet, I have two columns. Group name, which contains names of each team from Sheet1 and names, which contains my current ArrayFormula:
=ARRAYFORMULA(TEXTJOIN(CHAR(10); 1;
REPT('Sheet1'!A:A; 1*('Sheet1'!B:B=A2))))
Using this formula I can combine all characters into one cell (with textjoin, repeated with row breaks) based on the value in Group name. The result looks like the following:
| GROUP NAME | NAME |
|:-----------|:--------------------------|
| Team Red | guile |
| | blanka |
| | sagat |
|------------|---------------------------|
| Team Blue | ruy |
| | vega |
|------------|---------------------------|
The problem is that I only want to combine the characters with having a selected value of 1. End-result should instead look like this:
| GROUP NAME | NAME |
|:-----------|:--------------------------|
| Team Red | guile |
| | blanka |
|------------|---------------------------|
| Team Blue | ruy |
|------------|---------------------------|
I tried the following setup using a IF-statement, but it just returns a string of FALSE:
=ARRAYFORMULA(TEXTJOIN(CHAR(10); 1;
REPT(IF('Sheet1'!C:C="1";'Sheet1'!A:A); 1*('Sheet1'!B:B=A2))))
Can this be one?
paste in F2 cell:
=UNIQUE(FILTER(B:B, C:C=1))
paste in G2 cell and drag down:
=TEXTJOIN(CHAR(10), 1, FILTER(A:A, B:B=F2, C:C=1))
or G2 cell be like:
=ARRAYFORMULA(TEXTJOIN(CHAR(10), 1,
REPT(FILTER(Sheet1!A:A, Sheet1!C:C=1), 1*(FILTER(Sheet1!B:B, Sheet1!C:C=1)=F2))))
When I use the following code:
+----------------------+---------------+---------------------------------------------------------------------+
| A | B | C |
+======================+===============+=====================================================================+
| Merchant Rating | Ad Extension | Star ratings plus number of reviews for the advertiser/merchant. |
| | | |
| | |.. image:: /images/merchant-rating.png |
+----------------------+---------------+---------------------------------------------------------------------+
The text preceding the image in column C gets wrapped in <blockquote> tags in the HTML output. Is there any way to avoid this?
To avoid the blockquote tag in the first paragraph of the third column, you could try using this:
+----------------------+---------------+---------------------------------------------------------------------+
| A | B | C |
+======================+===============+=====================================================================+
| Merchant Rating | Ad Extension | Star ratings plus number of reviews for the advertiser/merchant. |
| | | |
| | | |img| |
+----------------------+---------------+---------------------------------------------------------------------+
.. |img| image:: /images/merchant-rating.png
Instead, you'll get two paragraphs.
Use a substitution and remove the separating line so that Sphinx interprets the content as a single block of text.
+-----------------+--------------+------------------------------------------------------------------+
| A | B | C |
+=================+==============+==================================================================+
| Merchant Rating | Ad Extension | Star ratings plus number of reviews for the advertiser/merchant. |
| | | |img| |
+-----------------+--------------+------------------------------------------------------------------+
.. |img| image:: /images/merchant-rating.png