I'm trying to compile my program using makefile.
My code:
zad2_1Main: zad2_1Main.o zad2_1App.o
g++ -o zad2_1Main zad2_1Main.o zad2_1App.o wx-config.exe --cxxflags
zad2_1Main.o: zad2_1Main.cpp
g++ -c zad2_1Main.cpp wx-config.exe wx-config.exe --cxxflags
zad2_1App.o: zad2_1App.cpp
g++ -c zad2_1App.cpp wx-config.exe wx-config.exe --cxxflags
But i have error:
unrecognized command line option '--cxxflags'
wx-config.exe is in the same folder as the files
My files:
Zad2_1App.cpp
Zad2_1App.h
Zad2_1Main.cpp
Zad2_1Main.h
You want to pass the output of wx-config to the compiler, not the literal string itself. Moreover, it's pretty wasteful to run the shell script again and again for each and every source file. So instead you should do the following:
WX_CXXFLAGS := $(shell wx-config --cxxflags)
WX_LIBS := $(shell wx-config --libs)
zad2_1Main: zad2_1Main.o zad2_1App.o
g++ -o zad2_1Main zad2_1Main.o zad2_1App.o $(WX_LIBS)
zad2_1Main.o: zad2_1Main.cpp
g++ -c zad2_1Main.cpp $(WX_CXXFLAGS)
zad2_1App.o: zad2_1App.cpp
g++ -c zad2_1App.cpp $(WX_CXXFLAGS)
Your makefile could be improved in several other ways, but this should at least work.
#Tacoo.
You should use backticks around wx-config --cxxflags and wx-config --libs.
Something like
g++ -o zad2_1Main zad2_1Main.o zad2_1App.o `wx-config.exe --cxxflags`
Related
I'm trying to link a static library archive file (libx/libx.a) with a C code. The library requires 2 flags (-lx -lpthread). After linking the static library my ultimate goal is to create a shared library. I have the following Make file,
rsa-engine: rsa/rsa.c rsa/bignum.c rsa/aes.c rsa/x509parse.c rsa/pem.c
gcc -fPIC -o rsa/rsa.o -c rsa/rsa.c
gcc -fPIC -o rsa/bignum.o -c rsa/bignum.c
gcc -fPIC -o rsa/aes.o -c rsa/aes.c
gcc -fPIC -o rsa/x509parse.o -c rsa/x509parse.c
gcc -fPIC -o rsa/pem.o -c rsa/pem.c
gcc -fPIC rsa-engine.c libx/libx.a -L.libx/ -lx -lpthread -o rsa-engine.o
gcc -shared -o librsa_engine.so -lcrypto rsa-engine.o rsa/rsa.o rsa/bignum.o rsa/aes.o rsa/x509parse.o rsa/pem.o
clean:
rm -f *.o rsa/*.o *.so rsa-engine
After using the make command it produces the following output,
/usr/bin/ld: cannot find -lx
collect2: error: ld returned 1 exit status
Makefile:2: recipe for target 'rsa-engine' failed
make: *** [rsa-engine] Error 1
I found similar questions here. But that did not help. Seems like I can't make the link work. Any help with what I'm doing wrong?
I would like to achieve the same result generated by the following command,
CC := gcc
CFLAGS := -Wall -g -MD -O2 -I ../
LDFLAGS := -lx -lpthread
tests_files := hello
all: $(tests_files)
hello: hello.o ../libx/libx.a
$(CC) $(CFLAGS) -static $(<) -L../libx/ $(LDFLAGS) -o $(#)
It seems that your libx.a is located in libx, yet -L references .libx directory. Anyway, since you reference libx/libx.a directly, you may skip both -L.libx/ -lx and it should link just fine.
My Makefile:
helloworldlib.obj: helloworldlib.cpp
g++ -Wall -o helloworldlib.obj -c helloworldlib.cpp
helloworld.obj: source.cpp
g++ -Wall -o helloworld.obj -c source.cpp
helloworld.exe: source.cpp helloworld.obj
g++ -Wall -o helloworld.exe helloworld.obj helloworldlib.obj
I'm not sure what's wrong with this, when I run mingw32-make it only executes the first g++ -Wall -o helloworldlib.obj -c helloworldlib.cpp.
As far as I know this makefile is syntactically correct, mingw just doesn't seem to be able to find the other lines.
This is how make works. If no target is provided on the command line (e.g. mingw32-make helloworld.exe), by default it builds the first target defined in the file. See for instance: https://stackoverflow.com/a/2057716/2249356.
As a quick fix, you can just move the rule for helloworld.exe to the top of the file and then make will build all.
And, I think that the last rule is supposed to read
helloworld.exe: helloworld.obj helloworldlib.obj
g++ -Wall -o helloworld.exe helloworld.obj helloworldlib.obj
rather then with the source.cpp and its object code helloworld.obj as dependencies.
During installation of pintos, I had to run make.
Following is the Makefile.
all: setitimer-helper squish-pty squish-unix
CC = gcc
CFLAGS = -Wall -W
LDFLAGS = -lm
setitimer-helper: setitimer-helper.o
squish-pty: squish-pty.o
squish-unix: squish-unix.o
clean:
rm -f *.o setitimer-helper squish-pty squish-unix
In one computer it executed correctly. (output for the command is given below)
gcc -Wall -W -c -o setitimer-helper.o setitimer-helper.c
gcc -lm setitimer-helper.o -o setitimer-helper
gcc -Wall -W -c -o squish-pty.o squish-pty.c
gcc -lm squish-pty.o -o squish-pty
gcc -Wall -W -c -o squish-unix.o squish-unix.c
gcc -lm squish-unix.o -o squish-unix
but in other computer I got the following error
gcc -lm setitimer-helper.o -o setitimer-helper
setitimer-helper.o: In function `main':
setitimer-helper.c:(.text+0xc9): undefined reference to `floor'
collect2: error: ld returned 1 exit status
<builtin>: recipe for target 'setitimer-helper' failed
make: *** [setitimer-helper] Error 1
If looked at first line of outputs of both make commands
gcc -Wall -W -c -o setitimer-helper.o setitimer-helper.c
and
gcc -lm setitimer-helper.o -o setitimer-helper
They are different.
Why make is executing different commands for the same Makefile? and What should I do to remove error?
In the first computer, the setitimer-helper.o file either doesn't exist or the setitimer-helper.c file is newer, so make needs to rebuild it. Thus it runs the compiler, then afterwards it performs the link operation:
gcc -Wall -W -c -o setitimer-helper.o setitimer-helper.c
gcc -lm setitimer-helper.o -o setitimer-helper
On the second computer, the setitimer-helper.o file already exists and is newer than the setitimer-helper.c file, so the compile command was not needed and the second computer proceeded directly to the link line:
gcc -lm setitimer-helper.o -o setitimer-helper
The real question is why you got the linker error on the second computer.
The answer to that is that the -lm flag needs to come on the linker line after the object files. This happens because you added -lm to the LDFLAGS variable which is not the right one: that should contain options that tell the linker where to look for files, etc. (for example, the -L option).
Libraries should be added to the LDLIBS variable, not LDFLAGS. Change your makefile to this:
all: setitimer-helper squish-pty squish-unix
CC = gcc
CFLAGS = -Wall -W
LDLIBS = -lm
setitimer-helper: setitimer-helper.o
squish-pty: squish-pty.o
squish-unix: squish-unix.o
clean:
rm -f *.o setitimer-helper squish-pty squish-unix
Your link line will then look like:
gcc setitimer-helper.o -o setitimer-helper -lm
and should work properly.
I have a simple Makefile,
.PHONY: clean
PROGRAMS=$(patsubst main%.cpp,example%,$(wildcard main*.cpp))
all: ${PROGRAMS}
GCCVERSION=$(shell gcc -dumpversion)
GLCFLAGS=$(shell pkg-config --cflags gl)
CPPFLAGS=-Wall -O2 ${GLCFLAGS}
ifeq "${GCCVERSION}" "4.5.2"
CXXFLAGS=-std=c++0x
else
CXXFLAGS=-std=c++11
endif
GLLIBS=$(shell pkg-config --libs gl)
LIBS=${GLLIBS} -lglut
example%: main%.o shaders.o fileutils.o
${CXX} $^ ${LIBS} -o $#
clean:
rm -f *.o ${PROGRAMS}
But when I executed it, it delete the *.o files as last command. I don't know why:
$ make
g++ -std=c++11 -Wall -O2 -I/usr/include/libdrm -c -o main01.o main01.cpp
g++ -std=c++11 -Wall -O2 -I/usr/include/libdrm -c -o shaders.o shaders.cpp
g++ -std=c++11 -Wall -O2 -I/usr/include/libdrm -c -o fileutils.o fileutils.cpp
g++ main01.o shaders.o fileutils.o -lGL -lglut -o example01
rm main01.o fileutils.o shaders.o
Is there anything wrong with my Makefile?
Intermediate files are deleted by design: see Chained Rules in GNU make manual.
Use .SECONDARY or .PRECIOUS targets to keep your precioussss temp files.
Just to clarify the previous response, you need to add a special rule like
.PRECIOUS: myfile.o
I am pretty new to Makefiles and i am trying to build an executable from 3 files, file1.c, file2.c, and file1.h into an executable called exFile. Here's what I got:
all: exFile
exFile: file1.o file2.o
gcc -Wall -g -m32 repeat.o show.o -o repeat
file1.o: file1.c file1.h
gcc -Wall -g -m32 -S file1.c -o file1.o
file2.o: file2.c
gcc -Wall -g -m32 -S file2.c -o file2.o
I've searched the web for makefiles in this format, but i came up empty handed so i was wondering if someone can help. When it tries to compile i get:
usr/bin/ld:file1.o:1: file format not recognized; treating as linker script
I've compiled programs using assembly files but I'm not to sure what to do with c files or the file1.h file. file1.c includes file1.h so i have to link them (I think?). Any suggestions or links to a reference would be appreciated
You have two problems with your gcc command-line. First, you're specifying the -S flag, which causes gcc to emit assembly code, rather than object code. Second, you're missing the -c flag, which tells gcc to compile the file to an object file, but not link it. If you just remove -S and change nothing else, you'll end up with an executable program named file1.o and another named file2.o, rather than two object files.
Besides those errors, you could simplify your makefile by the use of pattern rules. I suggest you try the following instead:
all: exFile
exFile: file1.o file2.o
gcc -Wall -g -m32 $^ -o $#
%.o: %.c
gcc -Wall -g -m32 -c $< -o $#
file1.o: file1.h
Or, as EmployedRussian points out, you can go with something even more minimal that leverages more of the built-in features of GNU make:
CC=gcc
CFLAGS=-Wall -g -m32
all: exFile
exFile: file1.o file2.o
$(LINK.c) $^ -o $#
file1.o: file1.h
The -S switch to gcc tells it to output assembler so this:
gcc -Wall -g -m32 -S file1.c -o file1.o
Is putting assembler into file1.o but you want, presumably, to compile file1.c into object code:
gcc -Wall -g -m32 file1.c -o file1.o
When the linker gets your file1.o it is confused because file1.o is assembler when the linker is expecting object code, hence your error.
So get rid of the -S switches for file1.o and file2.o.