I have a configuration properties class that I want to inject into a custom log4j2 RewritePolicy.
e.g.
#Plugin(name = "MyPolicy", category = "Core", elementType = "rewritePolicy", printObject = true)
public class MyPolicy implements RewritePolicy {
private MyPolicyProperties myPolicyProperties; // <-- want to inject/autowire this
public MyPolicy() {}
#PluginFactory
public static MyPolicy createPolicy() {
return new MyPolicy();
}
#Override
public LogEvent rewrite(LogEvent logEvent) {
// do something with myPolicyProperties here
return Log4jLogEvent.newBuilder()
.setLoggerName(logEvent.getLoggerName())
.setMarker(logEvent.getMarker())
.setLoggerFqcn(logEvent.getLoggerFqcn())
// ... etc
.build();
}
}
#ConfigurationProperties("app.mypolicy")
#Getter
#Setter
public class MyPolicyProperties {
private String property1;
private int property2;
// ... etc
}
I've tried implementing an ApplicationListener to reconfigure log4j as described here but was can't seem to get the appender and/or rewritepolicy to configure. Also tried implementing ApplicationContextAware described here but also didn't work.
Is there anyway to access the MyPolicyProperties in MyPolicy?
It can be done but it is almost never pretty. This is because Log4j Plugins are loaded by Log4j's plugin system while Spring Beans are loaded by Spring. Furthermore, they are not instantiated at the same time.
If you are using Spring Boot the very first thing that will happen is for Log4j2 to initialize because SpringApplication requests a Logger. So there would be no way to resolve the Spring Bean at that point as it doesn't exist. Later, Spring's bootstrap process will initialize Log4j again and then during application setup it will initialize once or twice more. During these subsequent initializations the bean may be available.
Depending on the type of application you are using you may be able to locate Spring's ApplicationContext so that you can call getBean() and inject it.
There is no automatic way to do this via an annotation or something similar.
The simplest way to do it is to either add a static method in the target class that gets initialized to reference itself when Spring is initialized or to create another class with a method that initializes a static method to reference the Spring created bean. So Spring will cause these static methods to reference the bean it creates. Then have your Log4j plugin call that static method to get the bean reference. Once it is non-null you can save it in the plugin and after that it should function as you want.
I am struggeling to get a Spring Component #Autowired into my custom Deserializer.
Example:
#JsonDeserialize (using = SomeClassJsonDeserializer.class)
SomeClass {
[...]
}
#JsonComponent
SomeClassJsonDeserializer extends JsonDeserializer<SomeClass> {
#Autowired
private SomeService service;
#Override
public SomeClass deserialize(JsonParser jsonParser,
DeserializationContext deserializationContext) throws IOException, JsonProcessingException {
[...]
// this.service is null
}
}
I found mainly two possible solutions which didn't work for me at all:
use SpringBeanAutowiringSupport in default constructor of Deserializer
use HandlerInstantiator (via config / custom implementation)
I am using only those Jackson annotations shown in the example above to 'configure' the Jackson parsing.
There is no additional custom configuration affecting Jackson in any way besides the default SpringBoot auto configuration. When using #EnableWebMvc (which breaks Spring-Boot auto configuration so I don't want to use it), the Component-wiring does work as expected.
Is there any official / recommended solution for plain Spring-Boot with default auto configuration ?
The problem was with how I used Spring's RestTemplate.
For a remote call, I created a new Instance of RestTemplate by contructor call (new RestTemplate()).
This way, Spring wasn't able to configure the RestTemplate - bean correctly (so that SpringBoot autoconfigure and Jackson autoconfigure 'connect' together, resulting in working Spring-DI in custom Jackson components).
I simply had to #Autowire the RestTemplateBuilder bean instance provided by Spring, and then call RestTemplateBuilder.build() to aqquire a RestTemplate bean instance created by Spring.
If I have one specific Java service and I want to validate service method parameters (before the method is invocated) I simply annotate the service class with #Service and #Validated and the method parameters with one or more constraint annotations.
What do I have to do to create two services of the same class in which service method parameters are being validated?
The creation of two services can be done by adding two #Bean annotated methods (that return a service instance) in the configuration class. But this did not result in proxy classes and service method arguments where not validated.
Annotating the service producing method with #Bean and #Validated did not work.
How do I solve this problem?
You can create your own proxy using ProxyFactory:
#Bean
public FooService fooService(Validator validator) {
ProxyFactory proxyFactory = new ProxyFactory(new FooService());
proxyFactory.addAdvice(new MethodValidationInterceptor(validator));
// generated proxy; it can be casted to FooService
Object proxy = proxyFactory.getProxy();
return (FooService) proxy;
}
It's weird though that your instances have not been wrapped into proxy. This should happen even when using #Bean configuration methods. You can try to debug AbstractAutowireCapableBeanFactory#initializeBean (around the line with applyBeanPostProcessorsAfterInitialization).
Is there a way where I can create a runtime bean on spring. I needed this to happen since the values of the bean will be injected by the external entity through RESTful service. Is it possible for the runtime bean to still be autowired?
It is perfectly possible
In your Controller (or in your Factory would be more elegant) you need to inject your Application context
#Autowired
private ApplicationContext applicationContext;
You can create your beans like this:
YourClassBean yourObject = this.applicationContext.getBean(YourClassBean.class, params);
In your Spring configuration do this:
#Bean
#Scope(value = "prototype")
YourClassBean yourClassBean(String params) {
return new YourClassBean(params);
}
And your are done.
In that example the Scope is Prototype which means that you will get a new object every time you call the method yourClassBean.
Also in that example the params are a String (it is like the initialization parameters of your bean, but that is totally optional, and of course you might need or want more parameters in there and it is totally find)
Please explain the following about NoSuchBeanDefinitionException exception in Spring:
What does it mean?
Under what conditions will it be thrown?
How can I prevent it?
This post is designed to be a comprehensive Q&A about occurrences of NoSuchBeanDefinitionException in applications using Spring.
The javadoc of NoSuchBeanDefinitionException explains
Exception thrown when a BeanFactory is asked for a bean instance for
which it cannot find a definition. This may point to a non-existing
bean, a non-unique bean, or a manually registered singleton instance
without an associated bean definition.
A BeanFactory is basically the abstraction representing Spring's Inversion of Control container. It exposes beans internally and externally, to your application. When it cannot find or retrieve these beans, it throws a NoSuchBeanDefinitionException.
Below are simple reasons why a BeanFactory (or related classes) would not be able to find a bean and how you can make sure it does.
The bean doesn't exist, it wasn't registered
In the example below
#Configuration
public class Example {
public static void main(String[] args) throws Exception {
AnnotationConfigApplicationContext ctx = new AnnotationConfigApplicationContext(Example.class);
ctx.getBean(Foo.class);
}
}
class Foo {}
we haven't registered a bean definition for the type Foo either through a #Bean method, #Component scanning, an XML definition, or any other way. The BeanFactory managed by the AnnotationConfigApplicationContext therefore has no indication of where to get the bean requested by getBean(Foo.class). The snippet above throws
Exception in thread "main" org.springframework.beans.factory.NoSuchBeanDefinitionException:
No qualifying bean of type [com.example.Foo] is defined
Similarly, the exception could have been thrown while trying to satisfy an #Autowired dependency. For example,
#Configuration
#ComponentScan
public class Example {
public static void main(String[] args) throws Exception {
AnnotationConfigApplicationContext ctx = new AnnotationConfigApplicationContext(Example.class);
}
}
#Component
class Foo { #Autowired Bar bar; }
class Bar { }
Here, a bean definition is registered for Foo through #ComponentScan. But Spring knows nothing of Bar. It therefore fails to find a corresponding bean while trying to autowire the bar field of the Foo bean instance. It throws (nested inside a UnsatisfiedDependencyException)
Caused by: org.springframework.beans.factory.NoSuchBeanDefinitionException:
No qualifying bean of type [com.example.Bar] found for dependency [com.example.Bar]:
expected at least 1 bean which qualifies as autowire candidate for this dependency. Dependency annotations: {#org.springframework.beans.factory.annotation.Autowired(required=true)}
There are multiple ways to register bean definitions.
#Bean method in a #Configuration class or <bean> in XML configuration
#Component (and its meta-annotations, eg. #Repository) through #ComponentScan or <context:component-scan ... /> in XML
Manually through GenericApplicationContext#registerBeanDefinition
Manually through BeanDefinitionRegistryPostProcessor
...and more.
Make sure the beans you expect are properly registered.
A common error is to register beans multiple times, ie. mixing the options above for the same type. For example, I might have
#Component
public class Foo {}
and an XML configuration with
<context:component-scan base-packages="com.example" />
<bean name="eg-different-name" class="com.example.Foo />
Such a configuration would register two beans of type Foo, one with name foo and another with name eg-different-name. Make sure you're not accidentally registering more beans than you wanted. Which leads us to...
If you're using both XML and annotation-based configurations, make sure you import one from the other. XML provides
<import resource=""/>
while Java provides the #ImportResource annotation.
Expected single matching bean, but found 2 (or more)
There are times when you need multiple beans for the same type (or interface). For example, your application may use two databases, a MySQL instance and an Oracle one. In such a case, you'd have two DataSource beans to manage connections to each one. For (simplified) example, the following
#Configuration
public class Example {
public static void main(String[] args) throws Exception {
AnnotationConfigApplicationContext ctx = new AnnotationConfigApplicationContext(Example.class);
System.out.println(ctx.getBean(DataSource.class));
}
#Bean(name = "mysql")
public DataSource mysql() { return new MySQL(); }
#Bean(name = "oracle")
public DataSource oracle() { return new Oracle(); }
}
interface DataSource{}
class MySQL implements DataSource {}
class Oracle implements DataSource {}
throws
Exception in thread "main" org.springframework.beans.factory.NoUniqueBeanDefinitionException:
No qualifying bean of type [com.example.DataSource] is defined:
expected single matching bean but found 2: oracle,mysql
because both beans registered through #Bean methods satisfied the requirement of BeanFactory#getBean(Class), ie. they both implement DataSource. In this example, Spring has no mechanism to differentiate or prioritize between the two. But such mechanisms exists.
You could use #Primary (and its equivalent in XML) as described in the documentation and in this post. With this change
#Bean(name = "mysql")
#Primary
public DataSource mysql() { return new MySQL(); }
the previous snippet would not throw the exception and would instead return the mysql bean.
You can also use #Qualifier (and its equivalent in XML) to have more control over the bean selection process, as described in the documentation. While #Autowired is primarily used to autowire by type, #Qualifier lets you autowire by name. For example,
#Bean(name = "mysql")
#Qualifier(value = "main")
public DataSource mysql() { return new MySQL(); }
could now be injected as
#Qualifier("main") // or #Qualifier("mysql"), to use the bean name
private DataSource dataSource;
without issue. #Resource is also an option.
Using wrong bean name
Just as there are multiple ways to register beans, there are also multiple ways to name them.
#Bean has name
The name of this bean, or if plural, aliases for this bean. If left
unspecified the name of the bean is the name of the annotated method.
If specified, the method name is ignored.
<bean> has the id attribute to represent the unique identifier for a bean and name can be used to create one or more aliases illegal in an (XML) id.
#Component and its meta annotations have value
The value may indicate a suggestion for a logical component name, to
be turned into a Spring bean in case of an autodetected component.
If that's left unspecified, a bean name is automatically generated for the annotated type, typically the lower camel case version of the type name. For example MyClassName becomes myClassName as its bean name. Bean names are case sensitive. Also note that wrong names/capitalization typically occur in beans referred to by string like #DependsOn("my BeanName") or XML config files.
#Qualifier, as mentioned earlier, lets you add more aliases to a bean.
Make sure you use the right name when referring to a bean.
More advanced cases
Profiles
Bean definition profiles allow you to register beans conditionally. #Profile, specifically,
Indicates that a component is eligible for registration when one or
more specified profiles are active.
A profile is a named logical grouping that may be activated
programmatically via
ConfigurableEnvironment.setActiveProfiles(java.lang.String...) or
declaratively by setting the spring.profiles.active property as a JVM
system property, as an environment variable, or as a Servlet context
parameter in web.xml for web applications. Profiles may also be
activated declaratively in integration tests via the #ActiveProfiles
annotation.
Consider this examples where the spring.profiles.active property is not set.
#Configuration
#ComponentScan
public class Example {
public static void main(String[] args) throws Exception {
AnnotationConfigApplicationContext ctx = new AnnotationConfigApplicationContext(Example.class);
System.out.println(Arrays.toString(ctx.getEnvironment().getActiveProfiles()));
System.out.println(ctx.getBean(Foo.class));
}
}
#Profile(value = "StackOverflow")
#Component
class Foo {
}
This will show no active profiles and throw a NoSuchBeanDefinitionException for a Foo bean. Since the StackOverflow profile wasn't active, the bean wasn't registered.
Instead, if I initialize the ApplicationContext while registering the appropriate profile
AnnotationConfigApplicationContext ctx = new AnnotationConfigApplicationContext();
ctx.getEnvironment().setActiveProfiles("StackOverflow");
ctx.register(Example.class);
ctx.refresh();
the bean is registered and can be returned/injected.
AOP Proxies
Spring uses AOP proxies a lot to implement advanced behavior. Some examples include:
Transaction management with #Transactional
Caching with #Cacheable
Scheduling and asynchronous execution with #Async and #Scheduled
To achieve this, Spring has two options:
Use the JDK's Proxy class to create an instance of a dynamic class at runtime which only implements your bean's interfaces and delegates all method invocations to an actual bean instance.
Use CGLIB proxies to create an instance of a dynamic class at runtime which implements both interfaces and concrete types of your target bean and delegates all method invocations to an actual bean instance.
Take this example of JDK proxies (achieved through #EnableAsync's default proxyTargetClass of false)
#Configuration
#EnableAsync
public class Example {
public static void main(String[] args) throws Exception {
AnnotationConfigApplicationContext ctx = new AnnotationConfigApplicationContext(Example.class);
System.out.println(ctx.getBean(HttpClientImpl.class).getClass());
}
}
interface HttpClient {
void doGetAsync();
}
#Component
class HttpClientImpl implements HttpClient {
#Async
public void doGetAsync() {
System.out.println(Thread.currentThread());
}
}
Here, Spring attempts to find a bean of type HttpClientImpl which we expect to find because the type is clearly annotated with #Component. However, instead, we get an exception
Exception in thread "main" org.springframework.beans.factory.NoSuchBeanDefinitionException:
No qualifying bean of type [com.example.HttpClientImpl] is defined
Spring wrapped the HttpClientImpl bean and exposed it through a Proxy object that only implements HttpClient. So you could retrieve it with
ctx.getBean(HttpClient.class) // returns a dynamic class: com.example.$Proxy33
// or
#Autowired private HttpClient httpClient;
It's always recommended to program to interfaces. When you can't, you can tell Spring to use CGLIB proxies. For example, with #EnableAsync, you can set proxyTargetClass to true. Similar annotations (EnableTransactionManagement, etc.) have similar attributes. XML will also have equivalent configuration options.
ApplicationContext Hierarchies - Spring MVC
Spring lets you build ApplicationContext instances with other ApplicationContext instances as parents, using ConfigurableApplicationContext#setParent(ApplicationContext). A child context will have access to beans in the parent context, but the opposite is not true. This post goes into detail about when this is useful, particularly in Spring MVC.
In a typical Spring MVC application, you define two contexts: one for the entire application (the root) and one specifically for the DispatcherServlet (routing, handler methods, controllers). You can get more details here:
Difference between applicationContext.xml and spring-servlet.xml in Spring Framework
It's also very well explained in the official documentation, here.
A common error in Spring MVC configurations is to declare the WebMVC configuration in the root context with #EnableWebMvc annotated #Configuration classes or <mvc:annotation-driven /> in XML, but the #Controller beans in the servlet context. Since the root context cannot reach into the servlet context to find any beans, no handlers are registered and all requests fail with 404s. You won't see a NoSuchBeanDefinitionException, but the effect is the same.
Make sure your beans are registered in the appropriate context, ie. where they can be found by the beans registered for WebMVC (HandlerMapping, HandlerAdapter, ViewResolver, ExceptionResolver, etc.). The best solution is to properly isolate beans. The DispatcherServlet is responsible for routing and handling requests so all related beans should go into its context. The ContextLoaderListener, which loads the root context, should initialize any beans the rest of your application needs: services, repositories, etc.
Arrays, collections, and maps
Beans of some known types are handled in special ways by Spring. For example, if you tried to inject an array of MovieCatalog into a field
#Autowired
private MovieCatalog[] movieCatalogs;
Spring will find all beans of type MovieCatalog, wrap them in an array, and inject that array. This is described in the Spring documentation discussing #Autowired. Similar behavior applies to Set, List, and Collection injection targets.
For a Map injection target, Spring will also behave this way if the key type is String. For example, if you have
#Autowired
private Map<String, MovieCatalog> movies;
Spring will find all beans of type MovieCatalog and add them as values to a Map, where the corresponding key will be their bean name.
As described previously, if no beans of the requested type are available, Spring will throw a NoSuchBeanDefinitionException. Sometimes, however, you just want to declare a bean of these collection types like
#Bean
public List<Foo> fooList() {
return Arrays.asList(new Foo());
}
and inject them
#Autowired
private List<Foo> foos;
In this example, Spring would fail with a NoSuchBeanDefinitionException because there are no Foo beans in your context. But you didn't want a Foo bean, you wanted a List<Foo> bean. Before Spring 4.3, you'd have to use #Resource
For beans that are themselves defined as a collection/map or array
type, #Resource is a fine solution, referring to the specific
collection or array bean by unique name. That said, as of 4.3,
collection/map and array types can be matched through Spring’s
#Autowired type matching algorithm as well, as long as the element
type information is preserved in #Bean return type signatures or
collection inheritance hierarchies. In this case, qualifier values can
be used to select among same-typed collections, as outlined in the
previous paragraph.
This works for constructor, setter, and field injection.
#Resource
private List<Foo> foos;
// or since 4.3
public Example(#Autowired List<Foo> foos) {}
However, it will fail for #Bean methods, ie.
#Bean
public Bar other(List<Foo> foos) {
new Bar(foos);
}
Here, Spring ignores any #Resource or #Autowired annotating the method, because it's a #Bean method, and therefore can't apply the behavior described in the documentation. However, you can use Spring Expression Language (SpEL) to refer to beans by their name. In the example above, you could use
#Bean
public Bar other(#Value("#{fooList}") List<Foo> foos) {
new Bar(foos);
}
to refer to the bean named fooList and inject that.